- 密度 [g/cm3]: 0.935
- 弯曲强度 [MPa]: 14.0
- 弯曲模量 [MPa]: 0.0520
- 脆化温度 [℃]: -100.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.935 g/cc | 0.0338 lb/in³ | ASTM D792 | ||
| Vinyl Acetate Content | 15 % | 15 % | TGA | ||
| Melt Index of Compound | 8.0 g/10 min | 8.0 g/10 min | ASTM D1238 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 91 | 91 | ASTM D2240 | ||
| Hardness, Shore D | 40 | 40 | ASTM D2240 | ||
| Tensile Strength, Ultimate | 14.0 MPa | 2030 psi | Type IV, crosshead speed 2 in/min; ASTM D638 | ||
| 6.90 MPa @Temperature 49.0 °C | 1000 psi @Temperature 120 °F | Type IV, crosshead speed 2 in/min; ASTM D638 | |||
| 23.0 MPa @Temperature -20.0 °C | 3340 psi @Temperature -4.00 °F | Type IV, crosshead speed 2 in/min, at -20°C; ASTM D638 | |||
| Elongation at Break | 700 % | 700 % | Type IV, crosshead speed 2 in/min; ASTM D638 | ||
| 500 % @Temperature -20.0 °C | 500 % @Temperature -4.00 °F | Type IV, crosshead speed 2 in/min, at -20°C; ASTM D638 | |||
| 650 % @Temperature 49.0 °C | 650 % @Temperature 120 °F | Type IV, crosshead speed 2 in/min; ASTM D638 | |||
| Modulus of Elasticity | 0.0590 GPa | 8.56 ksi | |||
| 0.154 GPa @Temperature -20.0 °C | 22.3 ksi @Temperature -4.00 °F | ||||
| Flexural Modulus | 0.0520 GPa | 7.54 ksi | ASTM D790 | ||
| 0.0270 GPa @Temperature 49.0 °C | 3.92 ksi @Temperature 120 °F | ASTM D790 | |||
| 0.223 GPa @Temperature -20.0 °C | 32.3 ksi @Temperature -4.00 °F | ASTM D790 | |||
| Flexural Stiffness | 59.0009 MPa | 8557.36 psi | |||
| 154.0 MPa | 22340 psi | ||||
| Tensile Impact Strength | 400 kJ/m² | 190 ft-lb/in² | At -20°C; ASTM D1822 | ||
| 505 kJ/m² | 240 ft-lb/in² | At 23°C; ASTM D1822 | |||
| Compression Set | 50 % | 50 % | Method B, 10 days at 25°C; ASTM D395 | ||
| 70 % @Temperature 70.0 °C | 70 % @Temperature 158 °F | Method B, 22 hours; ASTM D395 | |||
| Thermal Properties | Metric | English | Comments | ||
| Vicat Softening Point | 64.0 °C | 147 °F | ASTM D1525 | ||
| Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D762 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 121 - 204 °C | 250 - 399 °F | |||
| Descriptive Properties | |||||
| Cycle time | 0.5-2 minutes | Molding, equipment and part design dependent | |||
| Vinyl Acetate Content | 15 wt.% | ||||