Overview of materials for Phenolic/Glass Fiber SMC

Overview of materials for Phenolic/Glass Fiber SMC 物性表: Overview of materials for Phenolic/Glass Fiber SMC物性表及特性介绍,Overview of materials for Phenolic/Glass Fiber SMC注塑参数详情,如需Overview of materials for Phenolic/Glass Fiber SMC下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.25
  • 缺口冲击强度: 2.67
  • 断裂伸长率 [%]: 75.0
  • 弯曲强度 [MPa]: 35.0
  • 弯曲模量 [MPa]: 6.50
 
Physical PropertiesMetricEnglishComments
Density 1.25 - 2.00 g/cc0.0452 - 0.0723 lb/in³Average value: 1.55 g/cc Grade Count:47
Apparent Bulk Density 0.460 - 0.970 g/cc0.0166 - 0.0350 lb/in³Average value: 0.681 g/cc Grade Count:43
Linear Mold Shrinkage -0.000300 - 0.00950 cm/cm-0.000300 - 0.00950 in/inAverage value: 0.00422 cm/cm Grade Count:46
 
Mechanical PropertiesMetricEnglishComments
Ball Indentation Hardness 250 - 500 MPa36300 - 72500 psiAverage value: 337 MPa Grade Count:28
Tensile Strength, Ultimate 35.0 - 227 MPa5080 - 32900 psiAverage value: 64.1 MPa Grade Count:21
Modulus of Elasticity 6.50 - 13.5 GPa943 - 1960 ksiAverage value: 9.05 GPa Grade Count:19
Flexural Yield Strength 75.0 - 358 MPa10900 - 51900 psiAverage value: 110 MPa Grade Count:47
Flexural Modulus 6.50 - 25.0 GPa943 - 3630 ksiAverage value: 9.99 GPa Grade Count:46
Compressive Yield Strength 135 - 250 MPa19600 - 36300 psiAverage value: 216 MPa Grade Count:24
Izod Impact, Notched 2.67 - 6.40 J/cm5.00 - 12.0 ft-lb/inAverage value: 4.55 J/cm Grade Count:3
Charpy Impact Unnotched 0.300 - 1.50 J/cm²1.43 - 7.14 ft-lb/in²Average value: 0.718 J/cm² Grade Count:44
Charpy Impact, Notched 0.130 - 0.850 J/cm²0.619 - 4.05 ft-lb/in²Average value: 0.218 J/cm² Grade Count:42
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+7 - 1.00e+12 ohm-cm1.00e+7 - 1.00e+12 ohm-cmAverage value: 5.12e+11 ohm-cm Grade Count:41
Surface Resistance 1.00e+6 - 1.00e+11 ohm1.00e+6 - 1.00e+11 ohmAverage value: 5.12e+10 ohm Grade Count:41
Dielectric Constant 5.00 - 20.05.00 - 20.0Average value: 10.0 Grade Count:39
Dielectric Strength 5.00 - 35.0 kV/mm127 - 889 kV/inAverage value: 22.5 kV/mm Grade Count:34
Dissipation Factor 0.0100 - 0.4000.0100 - 0.400Average value: 0.205 Grade Count:40
Arc Resistance 60.0 - 240 sec60.0 - 240 secAverage value: 132 sec Grade Count:16
High Voltage Arc Resistance to Ignition (HVAR) 300 sec300 secAverage value: 300 sec Grade Count:5
Comparative Tracking Index 100 - 250 V100 - 250 VAverage value: 152 V Grade Count:26
Hot Wire Ignition, HWI 30.0 - 120 sec30.0 - 120 secAverage value: 108 sec Grade Count:14
High Amp Arc Ignition, HAI 0.000 - 120 arcs0.000 - 120 arcsAverage value: 70.6 arcs Grade Count:14
High Voltage Arc-Tracking Rate, HVTR 0.000 - 150 mm/min0.000 - 5.91 in/minAverage value: 19.8 mm/min Grade Count:10
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 130 - 280 °C266 - 536 °FAverage value: 179 °C Grade Count:27
Deflection Temperature at 8.0 MPa 105 - 190 °C221 - 374 °FAverage value: 134 °C Grade Count:44
UL RTI, Electrical 150 °C302 °FAverage value: 150 °C Grade Count:15
UL RTI, Mechanical with Impact 150 °C302 °FAverage value: 150 °C Grade Count:15
UL RTI, Mechanical without Impact 150 °C302 °FAverage value: 150 °C Grade Count:15
Flammability, UL94 HB - V-0HB - V-0Grade Count:17
Shrinkage 0.000 - 1.00 %0.000 - 1.00 %Average value: 0.337 % Grade Count:45
 
Processing PropertiesMetricEnglishComments
Feed Temperature 60.0 - 75.0 °C140 - 167 °FAverage value: 67.5 °C Grade Count:44
Nozzle Temperature 80.0 - 100 °C176 - 212 °FAverage value: 90.0 °C Grade Count:44
Melt Temperature 80.0 - 100 °C176 - 212 °FAverage value: 90.0 °C Grade Count:44
Mold Temperature 160 - 190 °C320 - 374 °FAverage value: 175 °C Grade Count:44
Injection Pressure 15.0 MPa2180 psiAverage value: 15.0 MPa Grade Count:44
Back Pressure 0.500 - 2.00 MPa72.5 - 290 psiAverage value: 1.25 MPa Grade Count:44
Cure Time 0.167 - 0.667 min0.00278 - 0.0111 hourAverage value: 0.375 min Grade Count:44
Shelf Life 2.00 - 6.00 Month
@Temperature -17.8 - 4.44 °C
2.00 - 6.00 Month
@Temperature 0.000 - 40.0 °F
Average value: 4.00 Month Grade Count:2

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34743.html

免责声明: 本文 Overview of materials for Phenolic/Glass Fiber SMC 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4