Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded

Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded 物性表: Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded物性表及特性介绍,Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded注塑参数详情,如需Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.7
  • 吸水率 [%]: 0.1
  • 缺口冲击强度: 8.0
 
Physical PropertiesMetricEnglishComments
Density 1.70 - 1.90 g/cc0.0614 - 0.0686 lb/in³Molding; IS 867-1963
Water Absorption 0.10 - 0.20 %0.10 - 0.20 %IS 13411-1993
Linear Mold Shrinkage 0.0015 - 0.0026 cm/cm0.0015 - 0.0026 in/inIS 13411-1992
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break >= 80.0 MPa>= 11600 psi5 mm/min.; IS 867-1963
Shear Strength >= 120 MPa>= 17400 psi2mm/min.; IS 867-1963
Izod Impact, Notched >= 8.00 J/cm>= 15.0 ft-lb/inIS 13411-1992
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+12 - 1.0 ohm-cm1.00e+12 - 1.0 ohm-cmIS 3396-1979
Surface Resistance 3.2e+11 - 1.0 ohm3.2e+11 - 1.0 ohmIS 3396-1979
Dielectric Strength >= 8.00 kV/mm
@Temperature 90.0 °C
>= 203 kV/in
@Temperature 194 °F
IS 2584-1963
Comparative Tracking Index >= 150 V>= 150 V2824-1975
 
Processing PropertiesMetricEnglishComments
Mold Temperature 160 - 180 °C320 - 356 °F
Injection Pressure 15.68 - 34.3 MPa2274 - 4970 psiMold Pressure
Cure Time 1.33 - 1.83 min0.0222 - 0.0306 hourper mm
Shelf Life 12.0 Month12.0 Month10-25°C

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34854.html

免责声明: 本文 Amity Thermosets ATS 157 Phenolic Molding Long glass fiber Filler, Compression Molded 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4