- 密度 [g/cm3]: 1.41
- 吸水率 [%]: 0.53
- 缺口冲击强度: 0.207
- 弯曲强度 [MPa]: 55.0
- 弯曲模量 [MPa]: 8.60
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.580 g/cc | 0.0210 lb/in³ | ASTM D1895 |
| Density | 1.41 g/cc | 0.0509 lb/in³ | ASTM D792 |
| Water Absorption | 0.53 % | 0.53 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0034 cm/cm | 0.0034 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 88 | 88 | ASTM D785 |
| Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 |
| Elongation at Break | 0.63 % | 0.63 % | ASTM D638 |
| Tensile Modulus | 9.40 GPa | 1360 ksi | ASTM D638 |
| Flexural Strength | 92.0 MPa | 13300 psi | ASTM D790 |
| Flexural Modulus | 8.60 GPa | 1250 ksi | ASTM D790 |
| Compressive Strength | 209 MPa | 30300 psi | ASTM D695 |
| Izod Impact, Notched | 0.207 J/cm | 0.388 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.200 J/cm² | 0.952 ft-lb/in² | ASTM D256 |
| Impact | 137 | 137 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.30e+12 ohm-cm | 2.30e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.1 | 5.1 | ASTM D150 |
| Dielectric Strength | 14.1 kV/mm | 358 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.045 | 0.045 | ASTM D150 |
| Arc Resistance | 135 sec | 135 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 67.0 µm/m-°C @Temperature 40.0 - 130 °C | 37.2 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Thermal Conductivity | 0.410 W/m-K @Temperature 100 °C | 2.85 BTU-in/hr-ft²-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 196 °C | 385 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 176 °C | 349 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Oxygen Index | 26 % | 26 % | ASTM D2863 |
| Shrinkage | 0.233 % | 0.233 % | 72 hr, 120ºC; ASTM D1299 |