- 密度 [g/cm3]: 1.57
- 吸水率 [%]: 0.18
- 缺口冲击强度: 0.214
- 弯曲强度 [MPa]: 52.0
- 弯曲模量 [MPa]: 8.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.670 g/cc | 0.0242 lb/in³ | ASTM D1895 |
| Density | 1.57 g/cc | 0.0567 lb/in³ | ASTM D792 |
| Water Absorption | 0.18 % | 0.18 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0064 cm/cm | 0.0064 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 70 | 70 | ASTM D785 |
| Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
| Elongation at Break | 0.78 % | 0.78 % | ASTM D638 |
| Tensile Modulus | 9.90 GPa | 1440 ksi | ASTM D638 |
| Flexural Strength | 87.0 MPa | 12600 psi | ASTM D790 |
| Flexural Modulus | 8.50 GPa | 1230 ksi | ASTM D790 |
| Compressive Strength | 152 MPa | 22000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.218 J/cm² | 1.04 ft-lb/in² | ASTM D256 |
| Impact | 140 | 140 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.40e+11 ohm-cm | 1.40e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.0 | 6.0 | ASTM D150 |
| Dielectric Strength | 9.30 kV/mm | 236 kV/in | Step by Step; ASTM D149 |
| 11.4 kV/mm | 290 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.056 | 0.056 | ASTM D150 |
| Arc Resistance | 182 sec | 182 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 190 °C | 374 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 178 °C | 352 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 6.00 mm | V-0 @Thickness 0.236 in | |
| Oxygen Index | 38 % | 38 % | ASTM D2863 |
| Shrinkage | 0.15 % | 0.15 % | 72 hr, 120ºC; ASTM D1299 |