- 密度 [g/cm3]: 1.47
- 吸水率 [%]: 0.211
- 缺口冲击强度: 0.159
- 弯曲强度 [MPa]: 53.0
- 弯曲模量 [MPa]: 8.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.620 g/cc | 0.0224 lb/in³ | ASTM D1895 |
| Density | 1.47 g/cc | 0.0531 lb/in³ | ASTM D792 |
| Water Absorption | 0.211 % | 0.211 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0036 cm/cm | 0.0036 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 88 | 88 | ASTM D785 |
| Tensile Strength, Ultimate | 53.0 MPa | 7690 psi | ASTM D638 |
| Elongation at Break | 0.65 % | 0.65 % | ASTM D638 |
| Tensile Modulus | 8.50 GPa | 1230 ksi | ASTM D638 |
| Flexural Strength | 78.0 MPa | 11300 psi | ASTM D790 |
| Flexural Modulus | 8.20 GPa | 1190 ksi | ASTM D790 |
| Compressive Strength | 206 MPa | 29900 psi | ASTM D695 |
| Izod Impact, Notched | 0.159 J/cm | 0.298 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.199 J/cm² | 0.947 ft-lb/in² | ASTM D256 |
| Impact | 95 | 95 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.20e+12 ohm-cm | 3.20e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.6 | 5.6 | ASTM D150 |
| Dielectric Strength | 11.9 kV/mm | 302 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.044 | 0.044 | ASTM D150 |
| Arc Resistance | 157 sec | 157 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 53.0 µm/m-°C @Temperature 40.0 - 130 °C | 29.4 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Thermal Conductivity | 0.440 W/m-K @Temperature 100 °C | 3.05 BTU-in/hr-ft²-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 204 °C | 399 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 192 °C | 378 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 3.00 mm | V-1 @Thickness 0.118 in | |
| Oxygen Index | 32 % | 32 % | ASTM D2863 |
| Shrinkage | 0.172 % | 0.172 % | 72 hr, 120ºC; ASTM D1299 |