- 密度 [g/cm3]: 1.81
- 吸水率 [%]: 0.045
- 缺口冲击强度: 0.174
- 弯曲强度 [MPa]: 42.0
- 弯曲模量 [MPa]: 11.1
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.870 g/cc | 0.0314 lb/in³ | ASTM D1895 |
| Density | 1.81 g/cc | 0.0654 lb/in³ | ASTM D792 |
| Water Absorption | 0.045 % | 0.045 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00173 cm/cm | 0.00173 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 59 | 59 | ASTM D785 |
| Tensile Strength, Ultimate | 42.0 MPa | 6090 psi | ASTM D638 |
| Elongation at Break | 0.58 % | 0.58 % | ASTM D638 |
| Tensile Modulus | 12.9 GPa | 1870 ksi | ASTM D638 |
| Flexural Strength | 69.0 MPa | 10000 psi | ASTM D790 |
| Flexural Modulus | 11.1 GPa | 1610 ksi | ASTM D790 |
| Compressive Strength | 144 MPa | 20900 psi | ASTM D695 |
| Izod Impact, Notched | 0.174 J/cm | 0.326 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.193 J/cm² | 0.919 ft-lb/in² | ASTM D256 |
| Impact | 63 | 63 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 4.20e+11 ohm-cm | 4.20e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 18.6 | 18.6 | ASTM D150 |
| Dissipation Factor | 0.051 | 0.051 | ASTM D150 |
| Comparative Tracking Index | 300 V | 300 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 192 °C | 378 °F | ASTM D648 |
| Shrinkage | 0.044 % | 0.044 % | 72 hr, 120ºC; ASTM D1299 |