- 密度 [g/cm3]: 1.55
- 吸水率 [%]: 0.224
- 缺口冲击强度: 0.171
- 弯曲强度 [MPa]: 52.0
- 弯曲模量 [MPa]: 8.90
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.640 g/cc | 0.0231 lb/in³ | ASTM D1895 |
| Density | 1.55 g/cc | 0.0560 lb/in³ | ASTM D792 |
| Water Absorption | 0.224 % | 0.224 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0069 cm/cm | 0.0069 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 78 | 78 | ASTM D785 |
| Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
| Elongation at Break | 0.70 % | 0.70 % | ASTM D638 |
| Tensile Modulus | 9.90 GPa | 1440 ksi | ASTM D638 |
| Flexural Strength | 79.0 MPa | 11500 psi | ASTM D790 |
| Flexural Modulus | 8.90 GPa | 1290 ksi | ASTM D790 |
| Compressive Strength | 173 MPa | 25100 psi | ASTM D695 |
| Izod Impact, Notched | 0.171 J/cm | 0.320 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.168 J/cm² | 0.800 ft-lb/in² | ASTM D256 |
| Impact | 99 | 99 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.00e+11 ohm-cm | 3.00e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.6 | 5.6 | ASTM D150 |
| Dielectric Strength | 10.5 kV/mm | 267 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.074 | 0.074 | ASTM D150 |
| Arc Resistance | 177 sec | 177 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 196 °C | 385 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 179 °C | 354 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.299 % | 0.299 % | 72 hr, 120ºC; ASTM D1299 |