- 密度 [g/cm3]: 1.54
- 吸水率 [%]: 0.21
- 缺口冲击强度: 0.236
- 弯曲强度 [MPa]: 52.0
- 弯曲模量 [MPa]: 9.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.630 g/cc | 0.0228 lb/in³ | ASTM D1895 |
| Density | 1.54 g/cc | 0.0556 lb/in³ | ASTM D792 |
| Water Absorption | 0.21 % | 0.21 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0034 cm/cm | 0.0034 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 79 | 79 | ASTM D785 |
| Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
| Elongation at Break | 0.61 % | 0.61 % | ASTM D638 |
| Tensile Modulus | 10.1 GPa | 1460 ksi | ASTM D638 |
| Flexural Strength | 94.0 MPa | 13600 psi | ASTM D790 |
| Flexural Modulus | 9.50 GPa | 1380 ksi | ASTM D790 |
| Compressive Strength | 175 MPa | 25400 psi | ASTM D695 |
| Izod Impact, Notched | 0.236 J/cm | 0.442 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.218 J/cm² | 1.04 ft-lb/in² | ASTM D256 |
| Impact | 113 | 113 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 4.10e+11 ohm-cm | 4.10e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.3 | 5.3 | ASTM D150 |
| Dielectric Strength | 11.9 kV/mm | 302 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.051 | 0.051 | ASTM D150 |
| Arc Resistance | 162 sec | 162 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 195 °C | 383 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Oxygen Index | 31 % | 31 % | ASTM D2863 |
| Shrinkage | 0.145 % | 0.145 % | 72 hr, 120ºC; ASTM D1299 |