- 密度 [g/cm3]: 1.77
- 吸水率 [%]: 0.071
- 缺口冲击强度: 0.35
- 弯曲强度 [MPa]: 53.0
- 弯曲模量 [MPa]: 14.6
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.790 g/cc | 0.0285 lb/in³ | ASTM D1895 |
| Density | 1.77 g/cc | 0.0639 lb/in³ | ASTM D792 |
| Water Absorption | 0.071 % | 0.071 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00275 cm/cm | 0.00275 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 82 | 82 | ASTM D785 |
| Tensile Strength, Ultimate | 53.0 MPa | 7690 psi | ASTM D638 |
| Elongation at Break | 0.38 % | 0.38 % | ASTM D638 |
| Tensile Modulus | 16.2 GPa | 2350 ksi | ASTM D638 |
| Flexural Strength | 114 MPa | 16500 psi | ASTM D790 |
| Flexural Modulus | 14.6 GPa | 2120 ksi | ASTM D790 |
| Compressive Strength | 156 MPa | 22600 psi | ASTM D695 |
| Izod Impact, Notched | 0.350 J/cm | 0.656 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.296 J/cm² | 1.41 ft-lb/in² | ASTM D256 |
| Impact | 172 | 172 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 8.20e+11 ohm-cm | 8.20e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.5 | 5.5 | ASTM D150 |
| Dielectric Strength | 14.1 kV/mm | 358 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.062 | 0.062 | ASTM D150 |
| Arc Resistance | 185 sec | 185 sec | ASTM D495 |
| Comparative Tracking Index | 250 V | 250 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 236 °C | 457 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 263 °C | 505 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 0.500 mm | V-0 @Thickness 0.0197 in | |
| Shrinkage | 0.068 % | 0.068 % | 72 hr, 120ºC; ASTM D1299 |