- 密度 [g/cm3]: 1.34
- 吸水率 [%]: 0.92
- 缺口冲击强度: 0.233
- 弯曲强度 [MPa]: 34.0
- 弯曲模量 [MPa]: 3.60
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.550 g/cc | 0.0199 lb/in³ | ASTM D1895 |
| Density | 1.34 g/cc | 0.0484 lb/in³ | ASTM D792 |
| Water Absorption | 0.92 % | 0.92 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0079 cm/cm | 0.0079 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 34.0 MPa | 4930 psi | ASTM D638 |
| Elongation at Break | 1.47 % | 1.47 % | ASTM D638 |
| Tensile Modulus | 4.50 GPa | 653 ksi | ASTM D638 |
| Flexural Strength | 56.0 MPa | 8120 psi | ASTM D790 |
| Flexural Modulus | 3.60 GPa | 522 ksi | ASTM D790 |
| Compressive Strength | 82.0 MPa | 11900 psi | ASTM D695 |
| Izod Impact, Notched | 0.233 J/cm | 0.437 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.281 J/cm² | 1.34 ft-lb/in² | ASTM D256 |
| Impact | 262 | 262 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.00e+11 ohm-cm | 2.00e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.5 | 4.5 | ASTM D150 |
| Dielectric Strength | 11.5 kV/mm | 292 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.081 | 0.081 | ASTM D150 |
| Arc Resistance | 67 sec | 67 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 217 °C | 423 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 136 °C | 277 °F | ASTM D648 |
| Oxygen Index | 24.6 % | 24.6 % | ASTM D2863 |
| Shrinkage | 0.39 % | 0.39 % | 72 hr, 120ºC; ASTM D1299 |