- 密度 [g/cm3]: 1.37
- 吸水率 [%]: 0.36
- 缺口冲击强度: 0.193
- 弯曲强度 [MPa]: 62.0
- 弯曲模量 [MPa]: 7.00
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.520 g/cc | 0.0188 lb/in³ | ASTM D1895 |
| Density | 1.37 g/cc | 0.0495 lb/in³ | ASTM D792 |
| Water Absorption | 0.36 % | 0.36 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0109 cm/cm | 0.0109 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 87 | 87 | ASTM D785 |
| Tensile Strength, Ultimate | 62.0 MPa | 8990 psi | ASTM D638 |
| Elongation at Break | 0.87 % | 0.87 % | ASTM D638 |
| Tensile Modulus | 8.10 GPa | 1170 ksi | ASTM D638 |
| Flexural Strength | 86.0 MPa | 12500 psi | ASTM D790 |
| Flexural Modulus | 7.00 GPa | 1020 ksi | ASTM D790 |
| Compressive Strength | 212 MPa | 30700 psi | ASTM D695 |
| Izod Impact, Notched | 0.193 J/cm | 0.362 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.186 J/cm² | 0.885 ft-lb/in² | ASTM D256 |
| Impact | 115 | 115 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 5.00e+13 ohm-cm | 5.00e+13 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.3 | 4.3 | ASTM D150 |
| Dielectric Strength | 11.3 kV/mm | 287 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.044 | 0.044 | ASTM D150 |
| Arc Resistance | 120 sec | 120 sec | ASTM D495 |
| Comparative Tracking Index | 150 V | 150 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 43.0 µm/m-°C @Temperature 40.0 - 130 °C | 23.9 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Maximum Service Temperature, Air | 197 °C | 387 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 151 °C | 304 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Shrinkage | 0.35 % | 0.35 % | 72 hr, 120ºC; ASTM D1299 |