- 密度 [g/cm3]: 1.38
- 吸水率 [%]: 0.5
- 缺口冲击强度: 0.251
- 弯曲强度 [MPa]: 57.0
- 弯曲模量 [MPa]: 6.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.460 g/cc | 0.0166 lb/in³ | ASTM D1895 |
| Density | 1.38 g/cc | 0.0499 lb/in³ | ASTM D792 |
| Water Absorption | 0.50 % | 0.50 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0112 cm/cm | 0.0112 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 86 | 86 | ASTM D785 |
| Tensile Strength, Ultimate | 57.0 MPa | 8270 psi | ASTM D638 |
| Elongation at Break | 0.84 % | 0.84 % | ASTM D638 |
| Tensile Modulus | 8.50 GPa | 1230 ksi | ASTM D638 |
| Flexural Strength | 72.0 MPa | 10400 psi | ASTM D790 |
| Flexural Modulus | 6.70 GPa | 972 ksi | ASTM D790 |
| Compressive Strength | 216 MPa | 31300 psi | ASTM D695 |
| Izod Impact, Notched | 0.251 J/cm | 0.470 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.197 J/cm² | 0.938 ft-lb/in² | ASTM D256 |
| Impact | 132 | 132 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.70e+14 ohm-cm | 1.70e+14 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.5 | 4.5 | ASTM D150 |
| Dielectric Strength | 10.9 kV/mm | 277 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.048 | 0.048 | ASTM D150 |
| Arc Resistance | 77 sec | 77 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 192 °C | 378 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 153 °C | 307 °F | ASTM D648 |
| Shrinkage | 0.39 % | 0.39 % | 72 hr, 120ºC; ASTM D1299 |