| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 3.02 g/cc | 3.02 g/cc | |||
| 2.80 - 3.30 g/cc | 2.80 - 3.30 g/cc | ASTM D792 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 26 | 26 | Typical Value; ASTM D2240 | ||
| <= 45 | <= 45 | ASTM D2240 | |||
| Tensile Strength at Break | >= 0.414 MPa | >= 60.0 psi | ASTM D412 | ||
| 0.586 MPa | 85.0 psi | Typical Value; ASTM D412 | |||
| Compression Set | 30 % | 30 % | ASTM D395 Method B 22 hrs 85°C | ||
| 20 - 45 % | 20 - 45 % | ASTM D395 Method B 22 hrs 85°C | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.020 ohm-cm | 0.020 ohm-cm | Initial; Chomerics MAT-1002 | ||
| <= 0.020 ohm-cm | <= 0.020 ohm-cm | Aged; Chomerics MAT-1002 | |||
| Shielding Effectiveness | >= 70 dB | >= 70 dB | Chomerics TP08 | ||
| Processing Properties | Metric | English | Comments | ||
| Extrusion Rate | 5.50 - 7.50 g/min | 5.50 - 7.50 g/min | |||
| Cure Time | 2.00 min | 0.0333 hour | @ 65°C & 85% RH | ||
| 3.00 min | 0.0500 hour | @ 30°C & 85% RH | |||
| Descriptive Properties | |||||
| Filler | Ag/Cu | ||||
| Resin | One Part Silicone | ||||
| Shear Adhesion N/cm VMin | 12 | ||||
