| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 4.55 - 5.05 g/cc | 4.55 - 5.05 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 78 - 92 | 78 - 92 | ASTM D2240 | ||
| Tensile Strength at Break | >= 2.76 MPa | >= 400 psi | ASTM D412 | ||
| Elongation at Break | >= 50 % | >= 50 % | ASTM D412 | ||
| Tear Strength | 12.25 kN/m | 69.90 pli | ASTM D624 | ||
| Compression Set | <= 45 % @Temperature 100 °C, Time 252000 sec | <= 45 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.0060 ohm-cm | 0.0060 ohm-cm | as supplied without pressure sensitive adhesive; MIL-DTL-83528 | ||
| Shielding Effectiveness | >= 90 dB @Frequency 2.00e+9 Hz | >= 90 dB @Frequency 2.00e+9 Hz | Plane Wave; MIL-DTL-83528 Para.4.6.12 | ||
| >= 90 dB @Frequency 1.00e+10 Hz | >= 90 dB @Frequency 1.00e+10 Hz | Plane Wave; MIL-DTL-83528 Para.4.6.12 | |||
| >= 100 dB @Frequency 5.00e+8 Hz | >= 100 dB @Frequency 5.00e+8 Hz | E Field; MIL-DTL-83528 Para.4.6.12 | |||
| >= 105 dB @Frequency 1.00e+8 Hz | >= 105 dB @Frequency 1.00e+8 Hz | E Field; MIL-DTL-83528 Para.4.6.12 | |||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 2.10 W/m-K @Pressure 2.07 MPa | 14.6 BTU-in/hr-ft²-°F @Pressure 300 psi | ASTM D5470 | ||
| Maximum Service Temperature, Air | 200 °C | 392 °F | |||
| Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Flex TR10; ASTM D1329 | ||
| Descriptive Properties | |||||
| Binder | Fluorocarbon/Fluorosilicone | ||||
| Filler | Ag/Ni | ||||
| Heat Aging | <0.008 ohm-cm | 200°C fir 48 hrs; CEPS-0002 | |||
