Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Specific Gravity | 1.75 - 2.25 g/cc | 1.75 - 2.25 g/cc | ASTM D792 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore A | 63 - 77 | 63 - 77 | ASTM D2240 | ||
Tensile Strength at Break | >= 1.24 MPa | >= 180 psi | ASTM D412 | ||
Elongation at Break | 60 - 260 % | 60 - 260 % | ASTM D412 | ||
Tear Strength | 6.13 kN/m | 35.0 pli | ASTM D624 | ||
Compression Set | <= 30 % @Temperature 100 °C, Time 252000 sec | <= 30 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 0.012 ohm-cm | 0.012 ohm-cm | without psa; MIL-DTL-83528 | ||
0.015 ohm-cm | 0.015 ohm-cm | Post Tensile Set; MIL-G-83528 Para.4.6.9 | |||
Shielding Effectiveness | >= 55 dB @Frequency 200000 Hz | >= 55 dB @Frequency 200000 Hz | H Field; MIL-DTL-83528 Para.4.6.12 | ||
>= 75 dB @Frequency 4.00e+10 Hz | >= 75 dB @Frequency 4.00e+10 Hz | Plane Wave; MIL-DTL-83528 Para.4.6.12 | |||
>= 90 dB @Frequency 1.00e+10 Hz | >= 90 dB @Frequency 1.00e+10 Hz | Plane Wave; MIL-DTL-83528 Para.4.6.12 | |||
>= 95 dB @Frequency 2.00e+9 Hz | >= 95 dB @Frequency 2.00e+9 Hz | Plane Wave; MIL-DTL-83528 Para.4.6.12 | |||
>= 100 dB @Frequency 5.00e+8 Hz | >= 100 dB @Frequency 5.00e+8 Hz | E Field; MIL-DTL-83528 Para.4.6.12 | |||
>= 110 dB @Frequency 1.00e+8 Hz | >= 110 dB @Frequency 1.00e+8 Hz | E Field; MIL-DTL-83528 Para.4.6.12 | |||
Thermal Properties | Metric | English | Comments | ||
Maximum Service Temperature, Air | 200 °C | 392 °F | |||
Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | Flex TR10; ASTM D1329 | ||
Descriptive Properties | |||||
Binder | Fluoro-silicone | ||||
EMP Survivability | >0.9 kA / in | MIL-DTL-83528 Para.4.6.16 | |||
Filler | Ag/Al | ||||
Grade | Military-Aerospace | ||||
Heat Aging | <0.015 ohm-cm | MIL-DTL-83528 Para.4.6.15 | |||
Type | D | MIL-DTL-83528 | |||
Vibration Resistance, After | <0.012 ohm-cm | MIL-DTL-83528 Para.4.6.13 | |||
Vibration Resistance, During | <0.015 ohm-cm | MIL-DTL-83528 Para.4.6.13 |