- 吸水率 [%]: 0.13
- 缺口冲击强度: 0.27
- 拉伸强度 [MPa]: 49.0
- 弯曲模量 [MPa]: 2.10
- 硬度: 106.0
- 热变形温度 [℃]: 69.0
- 透光率 [%]: 91.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
| Water Absorption | 0.13 % | 0.13 % | 24h Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm | 0.0020 - 0.0050 in/in @Thickness 0.126 in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 106 | 106 | ASTM D785 |
| Tensile Strength at Break | 27.0 MPa | 3920 psi | ISO 527 |
| 30.0 MPa | 4350 psi | ASTM D638 | |
| Tensile Strength, Yield | 49.0 MPa | 7110 psi | ASTM D638 |
| 49.0 MPa | 7110 psi | ISO 527 | |
| Elongation at Break | 110 % | 110 % | ISO 527 |
| 150 % | 150 % | ASTM D638 | |
| Elongation at Yield | 4.0 % | 4.0 % | ISO 527 |
| 4.3 % | 4.3 % | ASTM D638 | |
| Tensile Modulus | 2.01 GPa | 292 ksi | ASTM D638 |
| 2.02 GPa | 293 ksi | ISO 527 | |
| Flexural Strength | 69.0 MPa | 10000 psi | ISO 178 |
| 71.0 MPa | 10300 psi | ASTM D790 | |
| Flexural Modulus | 2.10 GPa | 305 ksi | ISO 178 |
| 2.20 GPa | 319 ksi | ASTM D790 | |
| Izod Impact, Notched | 0.270 J/cm @Temperature -40.0 °C | 0.506 ft-lb/in @Temperature -40.0 °F | ASTM D256 |
| 0.980 J/cm @Temperature 23.0 °C | 1.84 ft-lb/in @Temperature 73.4 °F | ASTM D256 | |
| Izod Impact, Unnotched | NB | NB | ASTM D4812 |
| NB @Temperature -40.0 °C | NB @Temperature -40.0 °F | ASTM D4812 | |
| Izod Impact, Notched (ISO) | 3.90 kJ/m² @Temperature -40.0 °C | 1.86 ft-lb/in² @Temperature -40.0 °F | ISO 180 |
| 8.10 kJ/m² @Temperature 23.0 °C | 3.85 ft-lb/in² @Temperature 73.4 °F | ISO 180 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 69.0 °C | 156 °F | ISO 75 |
| 69.0 °C | 156 °F | ASTM D648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | ASTM D648 |
| 62.0 °C | 144 °F | ISO 75 | |
| Optical Properties | Metric | English | Comments |
| Haze | 0.30 % | 0.30 % | ASTM D1003 |
| Transmission, Visible | 91 % | 91 % | Total Transmittance; ASTM D1003 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 249 - 271 °C | 480 - 520 °F | |
| Mold Temperature | 16.0 - 38.0 °C | 60.8 - 100 °F | |
| Drying Temperature | 71.0 °C | 160 °F | |
| Dry Time | 4 - 6 hour | 4 - 6 hour | |