Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade

Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade 物性表: Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade物性表及特性介绍,Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade注塑参数详情,如需Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.35
  • 密度 [g/cm3]: 0.91
  • 脆化温度 [℃]: -70.0
  • 透光率 [%]: 90.0
 
Physical PropertiesMetricEnglishComments
Density 0.910 - 0.942 g/cc0.0329 - 0.0340 lb/in³Average value: 0.920 g/cc Grade Count:83
Thickness 8.00 - 50.0 microns0.315 - 1.97 milAverage value: 29.1 microns Grade Count:63
Melt Flow 0.350 - 4.80 g/10 min0.350 - 4.80 g/10 minAverage value: 1.27 g/10 min Grade Count:83
Antiblock Level 500 - 7000 ppm500 - 7000 ppmAverage value: 5900 ppm Grade Count:6
Slip Level 1500 ppm1500 ppmAverage value: 1500 ppm Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Film Tensile Strength at Yield, MD 7.40 - 17.0 MPa1070 - 2470 psiAverage value: 11.0 MPa Grade Count:48
Film Tensile Strength at Yield, TD 7.60 - 17.0 MPa1100 - 2470 psiAverage value: 11.4 MPa Grade Count:48
Film Elongation at Break, MD 380 - 1320 %380 - 1320 %Average value: 587 % Grade Count:79
Film Elongation at Break, TD 580 - 1400 %580 - 1400 %Average value: 778 % Grade Count:79
Film Elongation at Yield, MD 19.0 - 43.0 %19.0 - 43.0 %Average value: 27.5 % Grade Count:4
Film Elongation at Yield, TD 12.0 - 36.0 %12.0 - 36.0 %Average value: 18.8 % Grade Count:4
Secant Modulus, MD 0.117 - 0.420 GPa17.0 - 60.9 ksiAverage value: 0.218 GPa Grade Count:57
Secant Modulus, TD 0.130 - 0.450 GPa18.9 - 65.3 ksiAverage value: 0.253 GPa Grade Count:57
Coefficient of Friction 0.100 - 1.000.100 - 1.00Average value: 0.510 Grade Count:41
Elmendorf Tear Strength MD 20.0 - 465 g20.0 - 465 gAverage value: 257 g Grade Count:26
Elmendorf Tear Strength TD 30.0 - 920 g30.0 - 920 gAverage value: 643 g Grade Count:26
Elmendorf Tear Strength, MD 0.530 - 17.7 g/micron13.5 - 450 g/milAverage value: 11.2 g/micron Grade Count:66
Elmendorf Tear Strength, TD 0.790 - 45.3 g/micron20.1 - 1150 g/milAverage value: 26.6 g/micron Grade Count:66
Dart Drop 2.20 - 34.0 g/micron56.0 - 864 g/milAverage value: 5.75 g/micron Grade Count:56
Dart drop Test 70.0 - 850 g0.154 - 1.87 lbAverage value: 230 g Grade Count:40
Film Tensile Strength at Break, MD 25.5 - 74.5 MPa3700 - 10800 psiAverage value: 44.6 MPa Grade Count:79
Film Tensile Strength at Break, TD 20.0 - 60.0 MPa2900 - 8700 psiAverage value: 35.4 MPa Grade Count:79
 
Thermal PropertiesMetricEnglishComments
Melting Point 116 - 127 °C241 - 261 °FAverage value: 124 °C Grade Count:25
Vicat Softening Point 95.0 - 119 °C203 - 246 °FAverage value: 105 °C Grade Count:13
Brittleness Temperature -70.0 °C-94.0 °FAverage value: -70.0 °C Grade Count:8
 
Optical PropertiesMetricEnglishComments
Haze 1.00 - 88.0 %1.00 - 88.0 %Average value: 12.9 % Grade Count:74
Gloss 9.00 - 150 %9.00 - 150 %Average value: 70.4 % Grade Count:74
Transmission, Visible 90.0 %90.0 %Average value: 90.0 % Grade Count:8
 
Processing PropertiesMetricEnglishComments
Processing Temperature 180 - 270 °C356 - 518 °FAverage value: 222 °C Grade Count:14
Melt Temperature 195 - 300 °C383 - 572 °FAverage value: 221 °C Grade Count:25
Die Opening 0.0640 - 0.280 cm0.0252 - 0.110 inAverage value: 0.0991 cm Grade Count:14
Extruder Size 6.35 cm2.50 inAverage value: 6.35 cm Grade Count:11
Blow-up Ratio (BUR) 1.50 - 4.501.50 - 4.50Average value: 2.63 Grade Count:12

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39779.html

免责声明: 本文 Overview of materials for Linear Low Density Polyethylene (LLDPE)/Hexene, Film Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4