A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene物性表参数

A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene

A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene 物性表: A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene物性表及特性介绍,A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene注塑参数详情,如需A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene下载, 可到相关下载区下载

拉伸强度 [MPa]: 13.1
弯曲模量 [MPa]: 0.414
脆化温度 [℃]: 76.0

Physical Properties	Metric	English	Comments

Specific Gravity	0.926 g/cc	0.926 g/cc	ASTM D792
ESCR 100% Igepal®	>= 50 hour	>= 50 hour	Condition C; ASTM D1693
Melt Index of Compound	33 g/10 min @Load 2.16 kg, Temperature 190 °C	33 g/10 min @Load 4.76 lb, Temperature 374 °F	Condition E; ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	53	53	ASTM D2240
Tensile Strength, Yield	13.1 MPa	1900 psi	2"/min; ASTM D638
Elongation at Break	120 %	120 %	2"/min; ASTM D638
Flexural Modulus	0.414 GPa	60.0 ksi	at 1% secant modulus; ASTM D790
Falling Dart Impact	27.1 J	20.0 ft-lb	-40°C; ASTM 3029

Thermal Properties	Metric	English	Comments
Brittleness Temperature	76.0 °C	169 °F	ASTM D746

Processing Properties	Metric	English	Comments
Melt Temperature	95.0 °C	203 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39775.html

免责声明: 本文 A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息