- 熔体流动速率 [g/10min]: 0.91
- 拉伸强度 [MPa]: 20.7
- 弯曲模量 [MPa]: 0.276
- 热变形温度 [℃]: 67.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 0.998 g/cc | 0.998 g/cc | ASTM D792 | ||
| Melt Flow | 0.91 - 2.7 g/10 min @Load 2.16 kg, Temperature 190 °C | 0.91 - 2.7 g/10 min @Load 4.76 lb, Temperature 374 °F | Procedure A; ASTM D1238 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 65 | 65 | 10 sec; ASTM D2240 | ||
| 66 | 66 | ASTM D2240 | |||
| Tensile Strength, Yield | 20.7 MPa | 3000 psi | Type I, 51 mm/min; ASTM D638 | ||
| Elongation at Break | 500 % | 500 % | Type I, 51 mm/min; ASTM D638 | ||
| Flexural Modulus | 0.276 GPa | 40.0 ksi | ASTM D790 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 67.0 °C @Thickness 3.18 mm | 153 °F @Thickness 0.125 in | Annealed; ASTM D648 | ||
| Flammability, UL94 | V-2 @Thickness 0.750 mm | V-2 @Thickness 0.0295 in | NC; UL 94 | ||
| Oxygen Index | 27 % @Thickness 3.18 mm | 27 % @Thickness 0.125 in | ASTM D2863 | ||
| Descriptive Properties | |||||
| Additional Information | *NOTE: HARDNESS DATA IS BASED ON SINGLE LOT DATA. | ||||
| Features | Flame Retardant | ||||
| Forms | Pellets | ||||
| Generic Material | HDPE | ||||
| Generic Name | Polyethylene, High Density (HDPE) | ||||
| Regional Availability | Africa & Middle East | ||||
| Asia Pacific | |||||
| Europe | |||||
| North America | |||||
| South America | |||||
| RoHS Compliance | RoHS Compliant | ||||