Overview of materials for Nylon 66, 10% Mineral Filled

Overview of materials for Nylon 66, 10% Mineral Filled 物性表: Overview of materials for Nylon 66, 10% Mineral Filled物性表及特性介绍,Overview of materials for Nylon 66, 10% Mineral Filled注塑参数详情,如需Overview of materials for Nylon 66, 10% Mineral Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.1
  • 吸水率 [%]: 0.6
  • 缺口冲击强度: 0.21
  • 拉伸强度 [MPa]: 78.5
  • 断裂伸长率 [%]: 90.0
  • 弯曲强度 [MPa]: 48.0
  • 弯曲模量 [MPa]: 2.30
  • 热变形温度 [℃]: 200.0
 
Physical PropertiesMetricEnglishComments
Density 1.10 - 1.51 g/cc0.0397 - 0.0546 lb/in³Average value: 1.22 g/cc Grade Count:7
Water Absorption 0.600 - 2.30 %0.600 - 2.30 %Average value: 1.34 % Grade Count:6
Linear Mold Shrinkage 0.00200 - 0.0250 cm/cm0.00200 - 0.0250 in/inAverage value: 0.0143 cm/cm Grade Count:6
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 48.0 - 90.0 MPa6960 - 13100 psiAverage value: 72.7 MPa Grade Count:3
Tensile Strength, Yield 78.5 - 93.1 MPa11400 - 13500 psiAverage value: 85.0 MPa Grade Count:3
Elongation at Break 1.00 - 14.0 %1.00 - 14.0 %Average value: 7.00 % Grade Count:4
Modulus of Elasticity 3.10 - 3.70 GPa450 - 537 ksiAverage value: 3.40 GPa Grade Count:3
Flexural Yield Strength 90.0 - 138 MPa13100 - 20000 psiAverage value: 110 MPa Grade Count:5
Flexural Modulus 2.30 - 6.89 GPa334 - 1000 ksiAverage value: 3.80 GPa Grade Count:4
Izod Impact, Notched 0.210 - 0.490 J/cm0.393 - 0.919 ft-lb/inAverage value: 0.399 J/cm Grade Count:4
Charpy Impact Unnotched NB - NB
@Temperature -40.0 - -40.0 °C
NB - NB
@Temperature -40.0 - -40.0 °F
Grade Count:1
Charpy Impact, Notched 0.380 - 0.460 J/cm²
@Temperature -40.0 - -30.0 °C
1.81 - 2.19 ft-lb/in²
@Temperature -40.0 - -22.0 °F
Average value: 0.420 J/cm² Grade Count:2
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmAverage value: 1.00e+15 ohm-cm Grade Count:3
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 200 - 252 °C392 - 485 °FAverage value: 235 °C Grade Count:6
Deflection Temperature at 1.8 MPa (264 psi) 195 - 250 °C383 - 482 °FAverage value: 222 °C Grade Count:4
Flammability, UL94 HB - V-0HB - V-0Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44785.html

免责声明: 本文 Overview of materials for Nylon 66, 10% Mineral Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4