- 吸水率 [%]: 0.6
- 缺口冲击强度: 0.88
- 拉伸强度 [MPa]: 142.0
- 弯曲模量 [MPa]: 8.30
- 热变形温度 [℃]: 260.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.65 g/cc | 1.65 g/cc | Dry; ASTM D792 |
| Water Absorption | 0.60 % | 0.60 % | Wet |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | Dry; ASTM D2863 |
| Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | Dry; ASTM D2863 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 60 | 60 | Wet; ASTM D785 |
| 100 | 100 | Dry; ASTM D785 | |
| Tensile Strength, Yield | 142 MPa | 20600 psi | Wet; ASTM D638 |
| 167 MPa | 24200 psi | Dry; ASTM D638 | |
| Elongation at Break | 2.5 % | 2.5 % | Dry; ASTM D638 |
| 2.7 % | 2.7 % | Wet; ASTM D638 | |
| Flexural Strength | 205 MPa | 29700 psi | Dry; ASTM D790 |
| 221 MPa | 32100 psi | Wet; ASTM D790 | |
| Flexural Modulus | 8.30 GPa | 1200 ksi | Wet; ASTM D790 |
| 10.8 GPa | 1570 ksi | Dry; ASTM D790 | |
| Izod Impact, Notched | 0.880 J/cm | 1.65 ft-lb/in | Dry; ASTM D256 |
| 0.980 J/cm | 1.84 ft-lb/in | Wet; ASTM D256 | |
| Taber Abrasion, mg/1000 Cycles | 29 | 29 | Wet; ASTM D1044 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 30.0 µm/m-°C @Temperature 20.0 °C | 16.7 µin/in-°F @Temperature 68.0 °F | Dry; ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 260 °C | 500 °F | Dry; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 252 °C | 486 °F | Dry; ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | Dry |