塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66

DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66

DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66 物性表: DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.41
  • 吸水率 [%]: 1.7
  • 缺口冲击强度: 14.0
  • 热变形温度 [℃]: 255.0
 
Physical PropertiesMetricEnglishComments
Density 1.41 g/cc0.0509 lb/in³DAM; ISO 1183
Filler Content 35 %35 %DAM
Water Absorption  1.7 %
@Thickness 1.00 mm,
Temperature 23.0 °C		1.7 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 5.5 %
@Thickness 1.00 mm,
Temperature 23.0 °C		5.5 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Linear Mold Shrinkage, Flow 0.0040 cm/cm
@Thickness 2.00 mm		0.0040 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.011 cm/cm
@Thickness 2.00 mm		0.011 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break  140 MPa
@Temperature 23.0 °C		20300 psi
@Temperature 73.4 °F		50%RH; ISO 527
 210 MPa
@Temperature 23.0 °C		30500 psi
@Temperature 73.4 °F		DAM; ISO 527
Tensile Stress  22.88 MPa
@Strain 0.520 %,
Temperature 150 °C		3318 psi
@Strain 0.520 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 23.42 MPa
@Strain 0.450 %,
Temperature 120 °C		3397 psi
@Strain 0.450 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 27.68 MPa
@Strain 0.480 %,
Temperature 90.0 °C		4015 psi
@Strain 0.480 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 30.57 MPa
@Strain 0.400 %,
Temperature 60.0 °C		4434 psi
@Strain 0.400 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 38.82 MPa
@Strain 1.00 %,
Temperature 150 °C		5630 psi
@Strain 1.00 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 41.19 MPa
@Strain 0.900 %,
Temperature 120 °C		5974 psi
@Strain 0.900 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 48.49 MPa
@Strain 0.950 %,
Temperature 90.0 °C		7033 psi
@Strain 0.950 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 51.08 MPa
@Strain 1.51 %,
Temperature 150 °C		7409 psi
@Strain 1.51 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 54.97 MPa
@Strain 1.35 %,
Temperature 120 °C		7973 psi
@Strain 1.35 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 56.67 MPa
@Strain 0.810 %,
Temperature 60.0 °C		8219 psi
@Strain 0.810 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 60.67 MPa
@Strain 2.02 %,
Temperature 150 °C		8799 psi
@Strain 2.02 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 65.07 MPa
@Strain 1.42 %,
Temperature 90.0 °C		9438 psi
@Strain 1.42 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 65.1 MPa
@Strain 0.670 %,
Temperature 40.0 °C		9440 psi
@Strain 0.670 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 66.75 MPa
@Strain 1.81 %,
Temperature 120 °C		9681 psi
@Strain 1.81 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 68.19 MPa
@Strain 2.51 %,
Temperature 150 °C		9890 psi
@Strain 2.51 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 74.22 MPa
@Strain 3.01 %,
Temperature 150 °C		10760 psi
@Strain 3.01 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 76.15 MPa
@Strain 2.26 %,
Temperature 120 °C		11040 psi
@Strain 2.26 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 76.53 MPa
@Strain 1.20 %,
Temperature 60.0 °C		11100 psi
@Strain 1.20 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 78.75 MPa
@Strain 3.50 %,
Temperature 150 °C		11420 psi
@Strain 3.50 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 79.19 MPa
@Strain 1.89 %,
Temperature 90.0 °C		11490 psi
@Strain 1.89 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 81.91 MPa
@Strain 4.01 %,
Temperature 150 °C		11880 psi
@Strain 4.01 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 83.72 MPa
@Strain 2.71 %,
Temperature 120 °C		12140 psi
@Strain 2.71 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 83.83 MPa
@Strain 4.51 %,
Temperature 150 °C		12160 psi
@Strain 4.51 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 84.2 MPa
@Strain 5.00 %,
Temperature 150 °C		12200 psi
@Strain 5.00 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 89.92 MPa
@Strain 3.16 %,
Temperature 120 °C		13040 psi
@Strain 3.16 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 90.66 MPa
@Strain 0.990 %,
Temperature 40.0 °C		13150 psi
@Strain 0.990 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 90.94 MPa
@Strain 2.36 %,
Temperature 90.0 °C		13190 psi
@Strain 2.36 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 93.81 MPa
@Strain 1.61 %,
Temperature 60.0 °C		13610 psi
@Strain 1.61 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 94.37 MPa
@Strain 3.60 %,
Temperature 120 °C		13690 psi
@Strain 3.60 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 97.28 MPa
@Strain 4.05 %,
Temperature 120 °C		14110 psi
@Strain 4.05 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 98.6 MPa
@Strain 4.50 %,
Temperature 120 °C		14300 psi
@Strain 4.50 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 100.48 MPa
@Strain 2.83 %,
Temperature 90.0 °C		14573 psi
@Strain 2.83 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 107.82 MPa
@Strain 3.30 %,
Temperature 90.0 °C		15638 psi
@Strain 3.30 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 108.57 MPa
@Strain 2.00 %,
Temperature 60.0 °C		15747 psi
@Strain 2.00 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 112.97 MPa
@Strain 3.77 %,
Temperature 90.0 °C		16385 psi
@Strain 3.77 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 113.41 MPa
@Strain 1.32 %,
Temperature 40.0 °C		16449 psi
@Strain 1.32 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 115.83 MPa
@Strain 4.24 %,
Temperature 90.0 °C		16800 psi
@Strain 4.24 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 116.43 MPa
@Strain 1.16 %,
Temperature 0.000 °C		16887 psi
@Strain 1.16 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 116.5 MPa
@Strain 4.70 %,
Temperature 90.0 °C		16900 psi
@Strain 4.70 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 121 MPa
@Strain 1.22 %,
Temperature 23.0 °C		17500 psi
@Strain 1.22 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 121.25 MPa
@Strain 2.41 %,
Temperature 60.0 °C		17586 psi
@Strain 2.41 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 122.59 MPa
@Strain 1.16 %,
Temperature -20.0 °C		17780 psi
@Strain 1.16 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 132.27 MPa
@Strain 2.81 %,
Temperature 60.0 °C		19184 psi
@Strain 2.81 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 133.68 MPa
@Strain 1.66 %,
Temperature 40.0 °C		19389 psi
@Strain 1.66 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 140.06 MPa
@Strain 3.20 %,
Temperature 60.0 °C		20314 psi
@Strain 3.20 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 141.3 MPa
@Strain 1.45 %,
Temperature 0.000 °C		20490 psi
@Strain 1.45 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 144.98 MPa
@Strain 3.61 %,
Temperature 60.0 °C		21028 psi
@Strain 3.61 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 145.14 MPa
@Strain 1.51 %,
Temperature 23.0 °C		21051 psi
@Strain 1.51 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 147.5 MPa
@Strain 4.00 %,
Temperature 60.0 °C		21390 psi
@Strain 4.00 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 148.97 MPa
@Strain 1.46 %,
Temperature -20.0 °C		21606 psi
@Strain 1.46 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 149.43 MPa
@Strain 1.98 %,
Temperature 40.0 °C		21673 psi
@Strain 1.98 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 163.24 MPa
@Strain 2.31 %,
Temperature 40.0 °C		23676 psi
@Strain 2.31 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 164.07 MPa
@Strain 1.74 %,
Temperature 0.000 °C		23796 psi
@Strain 1.74 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 164.64 MPa
@Strain 1.80 %,
Temperature 23.0 °C		23879 psi
@Strain 1.80 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 172.5 MPa
@Strain 1.74 %,
Temperature -20.0 °C		25020 psi
@Strain 1.74 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 174.68 MPa
@Strain 2.65 %,
Temperature 40.0 °C		25335 psi
@Strain 2.65 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 182.21 MPa
@Strain 2.97 %,
Temperature 40.0 °C		26427 psi
@Strain 2.97 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 182.52 MPa
@Strain 2.12 %,
Temperature 23.0 °C		26472 psi
@Strain 2.12 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 184.69 MPa
@Strain 2.04 %,
Temperature 0.000 °C		26787 psi
@Strain 2.04 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 187.2 MPa
@Strain 3.30 %,
Temperature 40.0 °C		27150 psi
@Strain 3.30 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 194.14 MPa
@Strain 2.03 %,
Temperature -20.0 °C		28158 psi
@Strain 2.03 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 195.92 MPa
@Strain 2.41 %,
Temperature 23.0 °C		28416 psi
@Strain 2.41 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 201.98 MPa
@Strain 2.33 %,
Temperature 0.000 °C		29295 psi
@Strain 2.33 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 206.86 MPa
@Strain 2.72 %,
Temperature 23.0 °C		30003 psi
@Strain 2.72 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 212.37 MPa
@Strain 3.01 %,
Temperature 23.0 °C		30802 psi
@Strain 3.01 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 213.86 MPa
@Strain 2.33 %,
Temperature -20.0 °C		31018 psi
@Strain 2.33 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 218.11 MPa
@Strain 2.62 %,
Temperature 0.000 °C		31634 psi
@Strain 2.62 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 229.9 MPa
@Strain 2.90 %,
Temperature 0.000 °C		33340 psi
@Strain 2.90 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 230.79 MPa
@Strain 2.61 %,
Temperature -20.0 °C		33473 psi
@Strain 2.61 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 245.5 MPa
@Strain 2.90 %,
Temperature -20.0 °C		35610 psi
@Strain 2.90 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
Elongation at Break  3.0 %
@Temperature 23.0 °C		3.0 %
@Temperature 73.4 °F		DAM; ISO 527
 5.0 %
@Temperature 23.0 °C		5.0 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  4.308 GPa
@Temperature 150 °C		624.8 ksi
@Temperature 302 °F		50%RH; ISO 527
 4.40 GPa
@Temperature 150 °C		638 ksi
@Temperature 302 °F		DAM; ISO 527
 5.005 GPa
@Temperature 120 °C		725.9 ksi
@Temperature 248 °F		50%RH; ISO 527
 5.173 GPa
@Temperature 90.0 °C		750.3 ksi
@Temperature 194 °F		50%RH; ISO 527
 5.204 GPa
@Temperature 120 °C		754.8 ksi
@Temperature 248 °F		DAM; ISO 527
 5.767 GPa
@Temperature 90.0 °C		836.4 ksi
@Temperature 194 °F		DAM; ISO 527
 6.046 GPa
@Temperature 60.0 °C		876.9 ksi
@Temperature 140 °F		50%RH; ISO 527
 6.66 GPa
@Temperature 40.0 °C		966 ksi
@Temperature 104 °F		50%RH; ISO 527
 7.643 GPa
@Temperature 60.0 °C		1109 ksi
@Temperature 140 °F		DAM; ISO 527
 7.80 GPa
@Temperature 23.0 °C		1130 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 10.136 GPa
@Temperature 40.0 °C		1470.1 ksi
@Temperature 104 °F		DAM; ISO 527
 10.23 GPa
@Temperature 0.000 °C		1484 ksi
@Temperature 32.0 °F		50%RH; ISO 527
 11.2 GPa
@Temperature 23.0 °C		1620 ksi
@Temperature 73.4 °F		DAM; ISO 527
 11.225 GPa
@Temperature -20.0 °C		1628.1 ksi
@Temperature -4.00 °F		50%RH; ISO 527
Izod Impact, Notched (ISO)  14.0 kJ/m²
@Temperature 23.0 °C		6.66 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 16.0 kJ/m²
@Temperature 23.0 °C		7.61 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Charpy Impact Unnotched  7.50 J/cm²
@Temperature -30.0 °C		35.7 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eU
 8.00 J/cm²
@Temperature -30.0 °C		38.1 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eU
 8.00 J/cm²
@Temperature 23.0 °C		38.1 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 9.50 J/cm²
@Temperature 23.0 °C		45.2 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 1.50 J/cm²
@Temperature 23.0 °C		7.14 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 1.80 J/cm²
@Temperature 23.0 °C		8.57 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour 7400 MPa
@Temperature 23.0 °C		1.07e+6 psi
@Temperature 73.4 °F		50%RH; ISO 899
Tensile Creep Modulus, 1000 hours 5000 MPa
@Temperature 23.0 °C		725000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+11 ohm-cm
@Temperature 23.0 °C		1.00e+11 ohm-cm
@Temperature 73.4 °F		50%RH; IEC 60093
 1.00e+15 ohm-cm
@Temperature 23.0 °C		1.00e+15 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
Surface Resistance 1.00e+13 ohm
@Temperature 23.0 °C		1.00e+13 ohm
@Temperature 73.4 °F		50%RH; IEC 60093
Comparative Tracking Index 450 V
@Temperature 23.0 °C		450 V
@Temperature 73.4 °F		DAM; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow 85.0 µm/m-°C
@Temperature 23.0 - 55.0 °C		47.2 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 255 °C491 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 250 °C482 °FDAM; ISO 75-1/-2
Glass Transition Temp, Tg 80.0 °C176 °F10°C/min; DAM; ISO 11357-1/-2
Flammability, UL94  HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; IEC 60695-11-10
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; IEC 60695-11-10
 HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; UL94
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; UL94
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; UL94
Oxygen Index 21 %21 %DAM; ISO 4589-1/-2
 
Processing PropertiesMetricEnglishComments
Melt Temperature 260 °C500 °F10°C/min; DAM; ISO 11357-1/-3
 295 °C563 °FDAM; Optimum
 285 - 305 °C545 - 581 °FDAM
Mold Temperature 70.0 - 120 °C158 - 248 °FDAM
 100 °C212 °FDAM; optimum
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveHeat StabilizerDAM
 Hydrolysis ResistantDAM
AppearanceBlack ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesAntifreeze ResistantDAM
 Chemical Resistance, GoodDAM
 Creep Resistance, GoodDAM
 Fatigue ResistantDAM
 Fuel ResistantDAM
 Grease ResistantDAM
 Heat Aging Resistance, GoodDAM
 Heat StabilizedDAM
 Hydrolysis ResistantDAM
 Oil ResistantDAM
 Stiffness, HighDAM
 Strength, HighDAM
 Thermal Aging Resistance, GoodDAM
FillerGlass fiber reinforcementDAM
FormsPelletsDAM
GenericNylon 66DAM
Material StatusCurrentDAM
Part Marking Code>PA66-GF35<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodBlow MoldingDAM
 Injection MoldingDAM
Product CategoryGlass Reinforced ResinsDAM
 Hydrolysis Resistant ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66-GF35ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 Electrical/Electronic ApplicationsDAM
 Industrial ApplicationsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45488.html

免责声明: 本文 DuPont Performance Polymers Zytel® 70G35HSLRA4 BK267 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4