塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA6
  4. Overview of materials for Nylon 6, 40% Mineral Filled

Overview of materials for Nylon 6, 40% Mineral Filled

Overview of materials for Nylon 6, 40% Mineral Filled 物性表: Overview of materials for Nylon 6, 40% Mineral Filled物性表及特性介绍,Overview of materials for Nylon 6, 40% Mineral Filled注塑参数详情,如需Overview of materials for Nylon 6, 40% Mineral Filled下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 3.0
  • 密度 [g/cm3]: 1.29
  • 吸水率 [%]: 0.7
  • 缺口冲击强度: 0.267
  • 拉伸强度 [MPa]: 45.0
  • 断裂伸长率 [%]: 50.0
  • 弯曲强度 [MPa]: 17.2
  • 弯曲模量 [MPa]: 0.0755
  • 硬度: 116.0
  • 热变形温度 [℃]: 182.0
 
Physical PropertiesMetricEnglishComments
Density 1.29 - 1.61 g/cc0.0466 - 0.0582 lb/in³Average value: 1.47 g/cc Grade Count:57
Filler Content 35.0 - 40.0 %35.0 - 40.0 %Average value: 39.6 % Grade Count:18
Water Absorption 0.700 - 6.00 %0.700 - 6.00 %Average value: 2.42 % Grade Count:38
Moisture Absorption at Equilibrium 0.250 - 2.30 %0.250 - 2.30 %Average value: 1.57 % Grade Count:22
Water Absorption at Saturation 5.70 - 7.00 %5.70 - 7.00 %Average value: 6.07 % Grade Count:6
Linear Mold Shrinkage 0.00100 - 0.0180 cm/cm0.00100 - 0.0180 in/inAverage value: 0.00751 cm/cm Grade Count:48
Linear Mold Shrinkage, Transverse 0.00200 - 0.0122 cm/cm0.00200 - 0.0122 in/inAverage value: 0.00856 cm/cm Grade Count:10
Melt Flow 3.00 - 33.0 g/10 min3.00 - 33.0 g/10 minAverage value: 19.0 g/10 min Grade Count:5
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 90.0 - 95.090.0 - 95.0Average value: 93.3 Grade Count:3
Hardness, Rockwell R 116 - 122116 - 122Average value: 120 Grade Count:16
Ball Indentation Hardness 85.0 - 205 MPa12300 - 29700 psiAverage value: 140 MPa Grade Count:3
Tensile Strength, Ultimate 17.2 - 98.1 MPa2500 - 14200 psiAverage value: 65.7 MPa Grade Count:36
 20.0 - 135 MPa
@Temperature -40.0 - 120 °C		2900 - 19600 psi
@Temperature -40.0 - 248 °F		Average value: 51.3 MPa Grade Count:7
 4.89 - 138.48 MPa
@Temperature -40.0 - 150 °C		709 - 20085 psi
@Temperature -40.0 - 302 °F		Average value: 51.3 MPa Grade Count:1
 4.89 - 138.48 MPa
@Strain 0.200 - 29.2 %		709 - 20085 psi
@Strain 0.200 - 29.2 %		Average value: 51.3 MPa Grade Count:1
Tensile Strength, Yield 45.0 - 120 MPa6530 - 17400 psiAverage value: 82.0 MPa Grade Count:24
 20.0 - 90.0 MPa
@Temperature -40.0 - 120 °C		2900 - 13100 psi
@Temperature -40.0 - 248 °F		Average value: 45.0 MPa Grade Count:1
Elongation at Break 1.50 - 40.0 %1.50 - 40.0 %Average value: 15.3 % Grade Count:43
 5.00 - 40.0 %
@Temperature -40.0 - 120 °C		5.00 - 40.0 %
@Temperature -40.0 - 248 °F		Average value: 25.6 % Grade Count:3
Elongation at Yield 2.50 - 27.0 %2.50 - 27.0 %Average value: 7.84 % Grade Count:16
 5.10 - 30.0 %
@Temperature -40.0 - 120 °C		5.10 - 30.0 %
@Temperature -40.0 - 248 °F		Average value: 20.0 % Grade Count:1
Modulus of Elasticity 2.20 - 7.58 GPa319 - 1100 ksiAverage value: 4.74 GPa Grade Count:26
 0.600 - 8.31 GPa
@Temperature -40.0 - 120 °C		87.0 - 1210 ksi
@Temperature -40.0 - 248 °F		Average value: 3.30 GPa Grade Count:4
Flexural Yield Strength 50.0 - 250 MPa7250 - 36300 psiAverage value: 118 MPa Grade Count:42
 25.0 - 207 MPa
@Temperature -40.0 - 120 °C		3630 - 30000 psi
@Temperature -40.0 - 248 °F		Average value: 84.2 MPa Grade Count:6
Flexural Modulus 0.0755 - 7.88 GPa11.0 - 1140 ksiAverage value: 5.06 GPa Grade Count:48
 0.700 - 8.60 GPa
@Temperature -40.0 - 120 °C		102 - 1250 ksi
@Temperature -40.0 - 248 °F		Average value: 2.76 GPa Grade Count:7
Compressive Yield Strength 69.0 - 186 MPa10000 - 27000 psiAverage value: 124 MPa Grade Count:5
Izod Impact, Notched 0.267 - 100 J/cm0.500 - 187 ft-lb/inAverage value: 0.669 J/cm Grade Count:34
 0.320 - 0.820 J/cm
@Temperature -40.0 - -40.0 °C		0.599 - 1.54 ft-lb/in
@Temperature -40.0 - -40.0 °F		Average value: 0.578 J/cm Grade Count:3
Izod Impact, Unnotched 2.14 - 16.4 J/cm4.00 - 30.7 ft-lb/inAverage value: 6.39 J/cm Grade Count:8
Izod Impact, Notched (ISO) 3.90 - 10.0 kJ/m²1.86 - 4.76 ft-lb/in²Average value: 7.32 kJ/m² Grade Count:6
 4.00 - 10.0 kJ/m²
@Temperature -30.0 - -30.0 °C		1.90 - 4.76 ft-lb/in²
@Temperature -22.0 - -22.0 °F		Average value: 8.08 kJ/m² Grade Count:3
Izod Impact, Unnotched (ISO) 75.0 - 85.0 kJ/m²
@Temperature -30.0 - -30.0 °C		35.7 - 40.4 ft-lb/in²
@Temperature -22.0 - -22.0 °F		Average value: 80.0 kJ/m² Grade Count:2
Charpy Impact Unnotched 1.70 J/cm² - NB8.09 ft-lb/in² - NBAverage value: 10.1 J/cm² Grade Count:16
 1.80 J/cm² - NB
@Temperature -40.0 - -20.0 °C		8.57 ft-lb/in² - NB
@Temperature -40.0 - -4.00 °F		Average value: 7.38 J/cm² Grade Count:8
Charpy Impact, Notched 0.300 - 1.20 J/cm²1.43 - 5.71 ft-lb/in²Average value: 0.775 J/cm² Grade Count:17
 0.270 - 1.00 J/cm²
@Temperature -40.0 - -20.0 °C		1.28 - 4.76 ft-lb/in²
@Temperature -40.0 - -4.00 °F		Average value: 0.734 J/cm² Grade Count:10
Puncture Energy 9.20 - 65.0 J6.79 - 47.9 ft-lbAverage value: 37.7 J Grade Count:4
 1.60 - 3.00 J
@Temperature -30.0 - -30.0 °C		1.18 - 2.21 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 2.65 J Grade Count:2
 3.00 - 3.00 J
@Temperature -30.0 - -30.0 °C		2.21 - 2.21 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 2.65 J Grade Count:2
 3.00 - 3.00 J
@Load <=74.2 kg		2.21 - 2.21 ft-lb
@Load <=164 lb		Average value: 2.65 J Grade Count:2
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+9 - 1.00e+16 ohm-cm1.00e+9 - 1.00e+16 ohm-cmAverage value: 9.30e+14 ohm-cm Grade Count:22
Surface Resistance 1.00e+10 - 1.00e+14 ohm1.00e+10 - 1.00e+14 ohmAverage value: 3.04e+13 ohm Grade Count:7
Dielectric Constant 3.80 - 15.03.80 - 15.0Average value: 5.76 Grade Count:8
Dielectric Strength 16.0 - 38.0 kV/mm406 - 965 kV/inAverage value: 25.5 kV/mm Grade Count:15
Dissipation Factor 0.0110 - 0.2500.0110 - 0.250Average value: 0.0625 Grade Count:7
Arc Resistance 115 - 190 sec115 - 190 secAverage value: 138 sec Grade Count:6
Comparative Tracking Index 400 - 600 V400 - 600 VAverage value: 525 V Grade Count:12
 
Thermal PropertiesMetricEnglishComments
CTE, linear 7.20 - 500 µm/m-°C4.00 - 278 µin/in-°FAverage value: 83.2 µm/m-°C Grade Count:24
CTE, linear, Transverse to Flow 58.0 - 75.0 µm/m-°C32.2 - 41.7 µin/in-°FAverage value: 67.1 µm/m-°C Grade Count:8
Specific Heat Capacity 2.00 - 2.00 J/g-°C0.478 - 0.478 BTU/lb-°FAverage value: 2.00 J/g-°C Grade Count:5
Thermal Conductivity 0.281 - 1.22 W/m-K1.95 - 8.50 BTU-in/hr-ft²-°FAverage value: 0.460 W/m-K Grade Count:7
Melting Point 215 - 222 °C419 - 432 °FAverage value: 219 °C Grade Count:37
Maximum Service Temperature, Air 65.0 - 120 °C149 - 248 °FAverage value: 100 °C Grade Count:4
Deflection Temperature at 0.46 MPa (66 psi) 182 - 220 °C360 - 428 °FAverage value: 199 °C Grade Count:30
Deflection Temperature at 1.8 MPa (264 psi) 80.0 - 204 °C176 - 400 °FAverage value: 128 °C Grade Count:48
Vicat Softening Point 200 - 225 °C392 - 437 °FAverage value: 204 °C Grade Count:11
Flammability, UL94 HB - V-0HB - V-0Grade Count:29
Oxygen Index 24.0 - 28.0 %24.0 - 28.0 %Average value: 26.4 % Grade Count:5
Glow Wire Test 650 °C1200 °FAverage value: 650 °C Grade Count:5
Shrinkage  0.300 - 0.300 %
@Temperature 120 - 120 °C		0.300 - 0.300 %
@Temperature 248 - 248 °F		Average value: 0.300 % Grade Count:1
 0.300 - 0.300 %
@Time 14400 - 14400 sec		0.300 - 0.300 %
@Time 4.00 - 4.00 hour		Average value: 0.300 % Grade Count:1
 
Processing PropertiesMetricEnglishComments
Processing Temperature 221 - 290 °C430 - 554 °FAverage value: 263 °C Grade Count:7
Nozzle Temperature 254 - 293 °C490 - 560 °FAverage value: 268 °C Grade Count:4
Melt Temperature 80.0 - 300 °C176 - 572 °FAverage value: 263 °C Grade Count:27
Mold Temperature 54.4 - 121 °C130 - 250 °FAverage value: 88.1 °C Grade Count:32
Drying Temperature 79.4 - 100 °C175 - 212 °FAverage value: 83.3 °C Grade Count:11
Dry Time 2.00 - 6.00 hour2.00 - 6.00 hourAverage value: 3.45 hour Grade Count:10
 2.00 - 4.00 hour
@Temperature 79.4 - 79.4 °C		2.00 - 4.00 hour
@Temperature 175 - 175 °F		Average value: 3.00 hour Grade Count:2
Moisture Content 0.0300 - 1.12 %0.0300 - 1.12 %Average value: 0.229 % Grade Count:5
Injection Pressure 4.96 - 138 MPa720 - 20000 psiAverage value: 52.2 MPa Grade Count:10
Back Pressure 0.345 MPa50.0 psiAverage value: 0.345 MPa Grade Count:3
Screw Speed 20.0 - 120 rpm20.0 - 120 rpmAverage value: 65.0 rpm Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45767.html

免责声明: 本文 Overview of materials for Nylon 6, 40% Mineral Filled 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4