Overview of materials for Nylon 6, Cast

Overview of materials for Nylon 6, Cast 物性表: Overview of materials for Nylon 6, Cast物性表及特性介绍,Overview of materials for Nylon 6, Cast注塑参数详情,如需Overview of materials for Nylon 6, Cast下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.679
  • 吸水率 [%]: 0.3
  • 缺口冲击强度: 0.16
  • 拉伸强度 [MPa]: 40.0
  • 断裂伸长率 [%]: 20.0
  • 弯曲强度 [MPa]: 43.1
  • 弯曲模量 [MPa]: 1.30
  • 硬度: 100.0
  • 热变形温度 [℃]: 160.0
 
Physical PropertiesMetricEnglishComments
Density 0.679 - 1.17 g/cc0.0245 - 0.0423 lb/in³Average value: 1.14 g/cc Grade Count:63
Water Absorption 0.300 - 7.00 %0.300 - 7.00 %Average value: 1.37 % Grade Count:28
Moisture Absorption at Equilibrium 1.00 - 3.00 %1.00 - 3.00 %Average value: 2.05 % Grade Count:33
Water Absorption at Saturation 2.50 - 7.00 %2.50 - 7.00 %Average value: 5.75 % Grade Count:48
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 80.0 - 88.080.0 - 88.0Average value: 84.9 Grade Count:16
Hardness, Rockwell R 100 - 120100 - 120Average value: 113 Grade Count:22
Hardness, Shore D 74.0 - 85.074.0 - 85.0Average value: 80.2 Grade Count:28
Ball Indentation Hardness 70.0 - 175 MPa10200 - 25400 psiAverage value: 140 MPa Grade Count:35
Tensile Strength, Ultimate 43.1 - 90.0 MPa6250 - 13100 psiAverage value: 75.5 MPa Grade Count:38
Tensile Strength, Yield 40.0 - 100 MPa5800 - 14500 psiAverage value: 70.8 MPa Grade Count:27
Elongation at Break 2.30 - 120 %2.30 - 120 %Average value: 36.4 % Grade Count:49
Elongation at Yield 5.00 %5.00 %Average value: 5.00 % Grade Count:5
Creep Strength 6.00 - 24.0 MPa870 - 3480 psiAverage value: 15.6 MPa Grade Count:15
Modulus of Elasticity 1.30 - 4.20 GPa189 - 609 ksiAverage value: 2.96 GPa Grade Count:64
 0.400 - 0.800 GPa
@Temperature 100 - 100 °C
58.0 - 116 ksi
@Temperature 212 - 212 °F
Average value: 0.600 GPa Grade Count:2
Flexural Yield Strength 20.0 - 150 MPa2900 - 21800 psiAverage value: 96.3 MPa Grade Count:48
Flexural Modulus 1.30 - 3.70 GPa189 - 537 ksiAverage value: 2.81 GPa Grade Count:45
Compressive Yield Strength 6.00 - 162 MPa870 - 23500 psiAverage value: 66.0 MPa Grade Count:42
Compressive Modulus 1.52 - 2.76 GPa220 - 400 ksiAverage value: 2.28 GPa Grade Count:20
Shear Strength 44.8 - 75.8 MPa6500 - 11000 psiAverage value: 66.3 MPa Grade Count:15
Izod Impact, Notched 0.160 - 0.961 J/cm0.300 - 1.80 ft-lb/inAverage value: 0.484 J/cm Grade Count:22
Izod Impact, Notched (ISO) 2.50 - 100000 kJ/m²1.19 - 47600 ft-lb/in²Average value: 11.1 kJ/m² Grade Count:19
Charpy Impact Unnotched 5.00 J/cm² - NB23.8 ft-lb/in² - NBAverage value: 5.63 J/cm² Grade Count:18
Charpy Impact, Notched 0.300 - 10.0 J/cm²1.43 - 47.6 ft-lb/in²Average value: 1.24 J/cm² Grade Count:20
Tensile Impact Strength 72.0 kJ/m²34.3 ft-lb/in²Average value: 72.0 kJ/m² Grade Count:3
Coefficient of Friction 0.0400 - 0.6000.0400 - 0.600Average value: 0.233 Grade Count:49
Coefficient of Friction, Static 0.200 - 0.3500.200 - 0.350Average value: 0.240 Grade Count:5
Tear Strength Test 0.150 - 1.800.150 - 1.80Average value: 0.375 Grade Count:14
K Factor (Wear Factor) 4.00e-11 - 1.00e-104.00e-11 - 1.00e-10Average value: 7.67e-11 Grade Count:12
K (wear) Factor 8.06 - 500 x 10-8 mm³/N-M4.00 - 248 x 10-10 in³-min/ft-lb-hrAverage value: 203 x 10-8 mm³/N-M Grade Count:12
Limiting Pressure Velocity 0.0800 - 1.33 MPa-m/sec2280 - 38000 psi-ft/minAverage value: 0.412 MPa-m/sec Grade Count:12
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+12 - 1.00e+15 ohm-cm1.00e+12 - 1.00e+15 ohm-cmAverage value: 3.61e+14 ohm-cm Grade Count:39
Surface Resistance 1.00e+10 - 1.00e+13 ohm1.00e+10 - 1.00e+13 ohmAverage value: 4.31e+12 ohm Grade Count:35
Dielectric Constant 3.10 - 12.03.10 - 12.0Average value: 3.94 Grade Count:51
Dielectric Strength 15.0 - 100 kV/mm381 - 2540 kV/inAverage value: 27.8 kV/mm Grade Count:48
Dissipation Factor 0.00200 - 0.1500.00200 - 0.150Average value: 0.0239 Grade Count:16
Dielectric Loss Index 0.0120 - 0.1400.0120 - 0.140Average value: 0.0318 Grade Count:17
Comparative Tracking Index 600 V600 VAverage value: 600 V Grade Count:12
 
Thermal PropertiesMetricEnglishComments
CTE, linear 63.0 - 180 µm/m-°C35.0 - 100 µin/in-°FAverage value: 81.9 µm/m-°C Grade Count:62
Specific Heat Capacity 1.67 - 1.67 J/g-°C0.399 - 0.400 BTU/lb-°FAverage value: 1.67 J/g-°C Grade Count:17
Thermal Conductivity 0.0259 - 0.342 W/m-K0.180 - 2.37 BTU-in/hr-ft²-°FAverage value: 0.260 W/m-K Grade Count:41
Melting Point 190 - 238 °C374 - 460 °FAverage value: 219 °C Grade Count:60
Maximum Service Temperature, Air 60.0 - 180 °C140 - 356 °FAverage value: 131 °C Grade Count:61
Deflection Temperature at 0.46 MPa (66 psi) 160 - 221 °C320 - 430 °FAverage value: 203 °C Grade Count:30
Deflection Temperature at 1.8 MPa (264 psi) 75.0 - 204 °C167 - 399 °FAverage value: 117 °C Grade Count:45
Minimum Service Temperature, Air -100 - -20.0 °C-148 - -4.00 °FAverage value: -45.1 °C Grade Count:34
Glass Transition Temp, Tg 5.00 - 50.0 °C41.0 - 122 °FAverage value: 39.2 °C Grade Count:5
Flammability, UL94 HB - V-2HB - V-2Grade Count:32
Oxygen Index 25.0 %25.0 %Average value: 25.0 % Grade Count:6

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45768.html

免责声明: 本文 Overview of materials for Nylon 6, Cast 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4