Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced

Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced 物性表: Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced物性表及特性介绍,Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced注塑参数详情,如需Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.34
  • 吸水率 [%]: 1.2
  • 缺口冲击强度: 16.0
  • 拉伸强度 [MPa]: 130.0
  • 弯曲模量 [MPa]: 6.00
 
Physical PropertiesMetricEnglishComments
Density 1.34 g/cc0.0484 lb/in³ISO 1183
Water Absorption at Saturation 1.2 %1.2 %ISO 62
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 130 MPa18900 psiISO 527
Elongation at Break 5.0 %5.0 %ISO 527
Tensile Modulus 7.00 GPa1020 ksiISO 527
Flexural Strength 180 MPa26100 psiISO 178
Flexural Modulus 6.00 GPa870 ksiISO 178
Izod Impact, Notched (ISO) 16.0 kJ/m²7.61 ft-lb/in²ISO 180
 
Thermal PropertiesMetricEnglishComments
Melting Point 165 - 175 °C329 - 347 °FISO 11357
Maximum Service Temperature, Air 100 °C212 °FContinuous use
 145 °C293 °FShort peaks operation
Flammability, UL94 HB
@Thickness 3.00 mm
HB
@Thickness 0.118 in

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47099.html

免责声明: 本文 Polyram PlusTek PD305G6 Nylon 12 for Injection Molding, 30% Glass-fiber Reinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4