SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12

SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12 物性表: SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12物性表及特性介绍,SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12注塑参数详情,如需SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.09
  • 缺口冲击强度: 0.74
  • 拉伸强度 [MPa]: 38.0
  • 弯曲模量 [MPa]: 1.76
  • 热变形温度 [℃]: 104.0
 
Physical PropertiesMetricEnglishComments
Density 1.09 g/cc0.0394 lb/in³ISO 1183
 1.102 g/cc0.03981 lb/in³ASTM D792
Moisture Absorption 0.200 %0.200 %50% RH, 24 hrs; ASTM D570
 0.300 %0.300 %23°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow  0.011 cm/cm
@Time 86400 sec
0.011 in/in
@Time 24.0 hour
ASTM D955
 0.0112 cm/cm
@Time 86400 sec
0.0112 in/in
@Time 24.0 hour
ISO 294
Linear Mold Shrinkage, Transverse  0.017 cm/cm
@Time 86400 sec
0.017 in/in
@Time 24.0 hour
ASTM D955
 0.017 cm/cm
@Time 86400 sec
0.017 in/in
@Time 24.0 hour
ISO 294
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 35.0 MPa5080 psiISO 527
 36.0 MPa5220 psiASTM D638
Tensile Strength, Yield 38.0 MPa5510 psiISO 527
 43.0 MPa6240 psiASTM D638
Elongation at Break 117.2 %117.2 %ASTM D638
Elongation at Yield 5.3 %5.3 %ASTM D638
Tensile Modulus 1.44 GPa209 ksi1 mm/min; ISO 527
 1.90 GPa276 ksi50 mm/min; ASTM D638
Flexural Strength 50.0 MPa7250 psiISO 178
 62.0 MPa8990 psiASTM D790
Flexural Modulus 1.76 GPa255 ksiISO 178
 1.77 GPa257 ksiASTM D790
Izod Impact, Notched 0.740 J/cm1.39 ft-lb/inASTM D256
Izod Impact, Unnotched NBNBASTM D4812
Izod Impact, Notched (ISO) 7.00 kJ/m²3.33 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 85.0 kJ/m²40.4 ft-lb/in²80*10*4; ISO 180/1U
Dart Drop, Total Energy 9.00 J6.64 ft-lbInstrumented Impact Energy @ peak; ASTM D3763
Impact Test 20.0 J14.8 ft-lbMultiaxial Impact; ISO 6603
 
Electrical PropertiesMetricEnglishComments
Surface Resistance 100 - 1.00e+6 ohm100 - 1.00e+6 ohmASTM D257
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  103 µm/m-°C
@Temperature -40.0 - 40.0 °C
57.2 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 104 µm/m-°C
@Temperature -40.0 - 40.0 °C
57.8 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
CTE, linear, Transverse to Flow  99.3 µm/m-°C
@Temperature -40.0 - 40.0 °C
55.2 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 99.4 µm/m-°C
@Temperature -40.0 - 40.0 °C
55.2 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi) 104 °C219 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 113 °C
@Thickness 3.20 mm
235 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 73.0 °C163 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 67.0 °C
@Thickness 3.20 mm
153 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47167.html

免责声明: 本文 SABIC Innovative Plastics LNP STAT-KON SX90398 PA 12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4