- 密度 [g/cm3]: 1.26
- 吸水率 [%]: 0.12
- 缺口冲击强度: 0.854
- 拉伸强度 [MPa]: 73.1
- 弯曲模量 [MPa]: 3.45
- 热变形温度 [℃]: 138.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.26 g/cc | 0.0455 lb/in³ | ASTM D792 |
Water Absorption | 0.12 % @Time 86400 sec | 0.12 % @Time 24.0 hour | ASTM D570 |
Linear Mold Shrinkage, Flow | 0.0060 cm/cm @Thickness 3.17 mm | 0.0060 in/in @Thickness 0.125 in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength, Yield | 73.1 MPa | 10600 psi | ASTM D638 |
Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
Flexural Strength | 129 MPa | 18700 psi | ASTM D790 |
Flexural Modulus | 3.45 GPa | 500 ksi | ASTM D790 |
Izod Impact, Notched | 0.854 J/cm @Thickness 3.17 mm | 1.60 ft-lb/in @Thickness 0.125 in | ASTM D256 |
Electrical Properties | Metric | English | Comments |
Dielectric Strength | 17.7 kV/mm | 450 kV/in | Method A (Short-Time); ASTM D149 |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 414 µm/m-°C | 230 µin/in-°F | ASTM D696 |
Deflection Temperature at 0.46 MPa (66 psi) | 138 °C | 280 °F | Unannealed; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 54.4 °C | 130 °F | Unannealed; ASTM D648 |