SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East)

SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East) 物性表: SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East)物性表及特性介绍,SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East)注塑参数详情,如需SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.36
  • 缺口冲击强度: 4.0
  • 弯曲模量 [MPa]: 3.90
 
Physical PropertiesMetricEnglishComments
Density 1.36 g/cc0.0491 lb/in³ISO 1183
Linear Mold Shrinkage, Flow 0.014 - 0.018 cm/cm0.014 - 0.018 in/inon Tensile Bar; SABIC Method
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 74.0 MPa10700 psi5 mm/min; ISO 527
Elongation at Break 3.6 %3.6 %5 mm/min; ISO 527
Flexural Strength 103 MPa14900 psibreak, 2 mm/min; ISO 178
Flexural Modulus 3.90 GPa566 ksi2 mm/min; ISO 178
Izod Impact, Notched (ISO) 4.00 kJ/m²1.90 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 15.0 kJ/m²7.14 ft-lb/in²80*10*4; ISO 180/1U
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 83.0 µm/m-°C
@Temperature 23.0 - 60.0 °C
46.1 µin/in-°F
@Temperature 73.4 - 140 °F
ISO 11359-2
CTE, linear, Transverse to Flow 79.0 µm/m-°C
@Temperature 23.0 - 60.0 °C
43.9 µin/in-°F
@Temperature 73.4 - 140 °F
ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi) 87.0 °C189 °FFlatw 80*10*4 sp=64mm; ISO 75/Af

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47796.html

免责声明: 本文 SABIC Innovative Plastics LNP THERMOCOMP IB008 PA 6/12 (Europe-Africa-Middle East) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4