塑胶原料之家
  1. 首页
  2. 英文物性
  3. PP
  4. Overview of materials for Polypropylene with 20% Glass Fiber Filler

Overview of materials for Polypropylene with 20% Glass Fiber Filler

Overview of materials for Polypropylene with 20% Glass Fiber Filler 物性表: Overview of materials for Polypropylene with 20% Glass Fiber Filler物性表及特性介绍,Overview of materials for Polypropylene with 20% Glass Fiber Filler注塑参数详情,如需Overview of materials for Polypropylene with 20% Glass Fiber Filler下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.5
  • 密度 [g/cm3]: 0.97
  • 吸水率 [%]: 0.01
  • 缺口冲击强度: 0.32
  • 拉伸强度 [MPa]: 27.0
  • 断裂伸长率 [%]: 32.0
  • 弯曲强度 [MPa]: 20.0
  • 弯曲模量 [MPa]: 1.49
  • 硬度: 80.0
  • 热变形温度 [℃]: 96.1
 
Physical PropertiesMetricEnglishComments
Density 0.970 - 1.46 g/cc0.0350 - 0.0527 lb/in³Average value: 1.06 g/cc Grade Count:230
Filler Content 15.0 - 25.0 %15.0 - 25.0 %Average value: 19.3 % Grade Count:100
Water Absorption 0.0100 - 0.0500 %0.0100 - 0.0500 %Average value: 0.0198 % Grade Count:42
Additive Loading 20.0 %20.0 %Average value: 20.0 % Grade Count:5
Maximum Moisture Content 0.01000.0100Average value: 0.0100 Grade Count:3
Linear Mold Shrinkage 0.00100 - 0.0320 cm/cm0.00100 - 0.0320 in/inAverage value: 0.00501 cm/cm Grade Count:185
Linear Mold Shrinkage, 6.35 mm section 0.00400 - 0.00700 cm/cm0.00400 - 0.00700 in/inAverage value: 0.00533 cm/cm Grade Count:15
Linear Mold Shrinkage, Transverse 0.00470 - 0.0206 cm/cm0.00470 - 0.0206 in/inAverage value: 0.0114 cm/cm Grade Count:16
Melt Flow 0.500 - 34.0 g/10 min0.500 - 34.0 g/10 minAverage value: 7.42 g/10 min Grade Count:168
Ash 13.0 - 23.0 %13.0 - 23.0 %Average value: 19.5 % Grade Count:11
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 53.0 - 10553.0 - 105Average value: 67.2 Grade Count:5
Hardness, Rockwell R 80.0 - 11580.0 - 115Average value: 96.6 Grade Count:56
Hardness, Shore D 47.0 - 75.047.0 - 75.0Average value: 71.1 Grade Count:28
Tensile Strength, Ultimate 20.0 - 115 MPa2900 - 16700 psiAverage value: 57.9 MPa Grade Count:135
 9.00 - 21.0 MPa
@Temperature 60.0 - 120 °C		1310 - 3050 psi
@Temperature 140 - 248 °F		Average value: 14.7 MPa Grade Count:1
Tensile Strength, Yield 27.0 - 90.0 MPa3920 - 13100 psiAverage value: 59.8 MPa Grade Count:97
Elongation at Break 1.00 - 100 %1.00 - 100 %Average value: 5.80 % Grade Count:153
Elongation at Yield 2.00 - 11.0 %2.00 - 11.0 %Average value: 4.51 % Grade Count:51
Modulus of Elasticity 1.03 - 6.55 GPa149 - 950 ksiAverage value: 4.19 GPa Grade Count:87
Flexural Yield Strength 32.0 - 165 MPa4640 - 23900 psiAverage value: 83.1 MPa Grade Count:171
Flexural Modulus 1.49 - 6.00 GPa217 - 870 ksiAverage value: 3.45 GPa Grade Count:227
 0.800 - 2.25 GPa
@Temperature 60.0 - 120 °C		116 - 326 ksi
@Temperature 140 - 248 °F		Average value: 1.53 GPa Grade Count:1
Compressive Yield Strength 48.3 - 170 MPa7000 - 24700 psiAverage value: 71.2 MPa Grade Count:7
Izod Impact, Notched 0.320 - 4.50 J/cm0.599 - 8.43 ft-lb/inAverage value: 0.940 J/cm Grade Count:173
 0.350 - 0.800 J/cm
@Temperature -40.0 - 0.000 °C		0.656 - 1.50 ft-lb/in
@Temperature -40.0 - 32.0 °F		Average value: 0.533 J/cm Grade Count:4
 0.5339 - 0.5339 J/cm
@Temperature -28.9 - -28.9 °C		1.000 - 1.000 ft-lb/in
@Temperature -20.0 - -20.0 °F		Average value: 0.533 J/cm Grade Count:1
 0.5339 - 0.5339 J/cm
@Thickness 3.17 - 3.17 mm		1.000 - 1.000 ft-lb/in
@Thickness 0.125 - 0.125 in		Average value: 0.533 J/cm Grade Count:1
Izod Impact, Unnotched 0.550 - 8.54 J/cm1.03 - 16.0 ft-lb/inAverage value: 4.49 J/cm Grade Count:74
 0.400 - 0.600 J/cm
@Temperature 0.000 - 0.000 °C		0.749 - 1.12 ft-lb/in
@Temperature 32.0 - 32.0 °F		Average value: 0.500 J/cm Grade Count:2
Izod Impact, Notched (ISO) 4.00 - 25.0 kJ/m²1.90 - 11.9 ft-lb/in²Average value: 11.3 kJ/m² Grade Count:16
 2.00 - 10.0 kJ/m²
@Temperature -30.0 - -20.0 °C		0.952 - 4.76 ft-lb/in²
@Temperature -22.0 - -4.00 °F		Average value: 7.11 kJ/m² Grade Count:9
Izod Impact, Unnotched (ISO) 27.0 - 45.0 kJ/m²12.8 - 21.4 ft-lb/in²Average value: 35.3 kJ/m² Grade Count:7
 13.0 - 40.0 kJ/m²
@Temperature -30.0 - -30.0 °C		6.19 - 19.0 ft-lb/in²
@Temperature -22.0 - -22.0 °F		Average value: 27.3 kJ/m² Grade Count:6
Charpy Impact Unnotched 2.30 - 6.50 J/cm²10.9 - 30.9 ft-lb/in²Average value: 4.27 J/cm² Grade Count:22
 1.10 - 5.00 J/cm²
@Temperature -40.0 - -20.0 °C		5.24 - 23.8 ft-lb/in²
@Temperature -40.0 - -4.00 °F		Average value: 3.27 J/cm² Grade Count:21
Charpy Impact, Notched 0.200 - 3.10 J/cm²0.952 - 14.8 ft-lb/in²Average value: 1.05 J/cm² Grade Count:50
 0.100 - 2.50 J/cm²
@Temperature -40.0 - -20.0 °C		0.476 - 11.9 ft-lb/in²
@Temperature -40.0 - -4.00 °F		Average value: 0.611 J/cm² Grade Count:39
Gardner Impact 0.282 - 2.09 J0.208 - 1.54 ft-lbAverage value: 0.746 J Grade Count:41
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1000 - 4.00e+16 ohm-cm1000 - 4.00e+16 ohm-cmAverage value: 1.25e+16 ohm-cm Grade Count:37
Surface Resistance 100000 - 1.00e+15 ohm100000 - 1.00e+15 ohmAverage value: 4.10e+14 ohm Grade Count:8
Static Decay 2.00 sec2.00 secAverage value: 2.00 sec Grade Count:3
Dielectric Constant 2.60 - 3.002.60 - 3.00Average value: 2.75 Grade Count:12
Dielectric Strength 17.3 - 22.0 kV/mm440 - 559 kV/inAverage value: 20.6 kV/mm Grade Count:21
Dissipation Factor 0.00100 - 0.002000.00100 - 0.00200Average value: 0.00109 Grade Count:11
Arc Resistance 80.0 - 130 sec80.0 - 130 secAverage value: 119 sec Grade Count:9
Comparative Tracking Index 600 V600 VAverage value: 600 V Grade Count:4
 
Thermal PropertiesMetricEnglishComments
CTE, linear 4.32 - 80.0 µm/m-°C2.40 - 44.4 µin/in-°FAverage value: 41.8 µm/m-°C Grade Count:33
Thermal Conductivity 0.288 - 1.21 W/m-K2.00 - 8.40 BTU-in/hr-ft²-°FAverage value: 0.442 W/m-K Grade Count:6
Melting Point 130 - 182 °C266 - 360 °FAverage value: 162 °C Grade Count:28
Maximum Service Temperature, Air 65.0 - 180 °C149 - 356 °FAverage value: 115 °C Grade Count:5
Deflection Temperature at 0.46 MPa (66 psi) 96.1 - 205 °C205 - 401 °FAverage value: 149 °C Grade Count:154
Deflection Temperature at 1.8 MPa (264 psi) 60.0 - 190 °C140 - 374 °FAverage value: 130 °C Grade Count:197
Vicat Softening Point 70.0 - 205 °C158 - 401 °FAverage value: 124 °C Grade Count:47
Flammability, UL94 HB - V-0HB - V-0Grade Count:108
Flammability Test 0.900 - 1250.900 - 125Average value: 34.2 Grade Count:4
Oxygen Index 21.0 - 22.0 %21.0 - 22.0 %Average value: 21.3 % Grade Count:4
Glow Wire Test 650 - 960 °C1200 - 1760 °FAverage value: 766 °C Grade Count:29
 
Processing PropertiesMetricEnglishComments
Processing Temperature 193 - 280 °C380 - 536 °FAverage value: 214 °C Grade Count:21
Feed Temperature 40.0 - 240 °C104 - 464 °FAverage value: 109 °C Grade Count:7
Nozzle Temperature 54.4 - 260 °C130 - 500 °FAverage value: 223 °C Grade Count:34
Melt Temperature 145 - 302 °C293 - 576 °FAverage value: 222 °C Grade Count:104
Mold Temperature 18.0 - 100 °C64.4 - 212 °FAverage value: 50.2 °C Grade Count:124
Injection Velocity 20.0 - 200 mm/sec0.787 - 7.87 in/secAverage value: 66.7 mm/sec Grade Count:3
Drying Temperature 51.7 - 90.0 °C125 - 194 °FAverage value: 76.5 °C Grade Count:81
Dry Time 1.00 - 4.00 hour1.00 - 4.00 hourAverage value: 2.45 hour Grade Count:74
Moisture Content 0.0500 - 0.200 %0.0500 - 0.200 %Average value: 0.0563 % Grade Count:24
Injection Pressure 2.76 - 120 MPa400 - 17400 psiAverage value: 63.4 MPa Grade Count:92
Hold Pressure 2.07 - 80.0 MPa300 - 11600 psiAverage value: 14.4 MPa Grade Count:28
Back Pressure 0.345 - 58.8 MPa50.0 - 8530 psiAverage value: 3.74 MPa Grade Count:49
Screw Speed 30.0 - 150 rpm30.0 - 150 rpmAverage value: 60.8 rpm Grade Count:6

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-30766.html

免责声明: 本文 Overview of materials for Polypropylene with 20% Glass Fiber Filler 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4