- 熔体流动速率 [g/10min]: 0.5
- 密度 [g/cm3]: 0.951
- 缺口冲击强度: 0.22
- 拉伸强度 [MPa]: 21.0
- 断裂伸长率 [%]: 38.0
- 弯曲强度 [MPa]: 20.0
- 弯曲模量 [MPa]: 1.79
- 热变形温度 [℃]: 65.6
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.951 - 1.21 g/cc | 0.0344 - 0.0437 lb/in³ | Average value: 1.04 g/cc Grade Count:20 |
| Linear Mold Shrinkage | 0.00180 - 0.00920 cm/cm | 0.00180 - 0.00920 in/in | Average value: 0.00533 cm/cm Grade Count:13 |
| Melt Flow | 0.500 - 7.40 g/10 min | 0.500 - 7.40 g/10 min | Average value: 2.01 g/10 min Grade Count:10 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 20.0 - 62.1 MPa | 2900 - 9000 psi | Average value: 36.6 MPa Grade Count:16 |
| Tensile Strength, Yield | 21.0 - 32.0 MPa | 3050 - 4640 psi | Average value: 26.6 MPa Grade Count:7 |
| Elongation at Break | 1.20 - 10.0 % | 1.20 - 10.0 % | Average value: 5.27 % Grade Count:19 |
| Modulus of Elasticity | 1.72 - 6.20 GPa | 250 - 899 ksi | Average value: 3.31 GPa Grade Count:19 |
| Flexural Yield Strength | 38.0 - 103 MPa | 5510 - 15000 psi | Average value: 57.5 MPa Grade Count:18 |
| Flexural Modulus | 1.79 - 4.90 GPa | 260 - 711 ksi | Average value: 2.97 GPa Grade Count:19 |
| Izod Impact, Notched | 0.220 - 0.801 J/cm | 0.412 - 1.50 ft-lb/in | Average value: 0.471 J/cm Grade Count:18 |
| Izod Impact, Unnotched | 0.400 - 5.34 J/cm | 0.749 - 10.0 ft-lb/in | Average value: 3.00 J/cm Grade Count:18 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 36.0 - 63.0 µm/m-°C | 20.0 - 35.0 µin/in-°F | Average value: 49.7 µm/m-°C Grade Count:6 |
| Deflection Temperature at 0.46 MPa (66 psi) | 65.6 - 142 °C | 150 - 288 °F | Average value: 122 °C Grade Count:10 |
| Deflection Temperature at 1.8 MPa (264 psi) | 60.0 - 128 °C | 140 - 262 °F | Average value: 77.5 °C Grade Count:17 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 200 °C | 392 °F | Average value: 200 °C Grade Count:8 |
| Melt Temperature | 191 - 232 °C | 375 - 450 °F | Average value: 213 °C Grade Count:11 |
| Mold Temperature | 32.2 - 65.6 °C | 90.0 - 150 °F | Average value: 48.9 °C Grade Count:10 |
| Drying Temperature | 79.4 - 90.0 °C | 175 - 194 °F | Average value: 79.9 °C Grade Count:11 |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | Average value: 86.2 MPa Grade Count:10 |