Overview of materials for Phenolic, Novolac, Mineral/Flock Filled

Overview of materials for Phenolic, Novolac, Mineral/Flock Filled 物性表: Overview of materials for Phenolic, Novolac, Mineral/Flock Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Mineral/Flock Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Mineral/Flock Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.45
  • 吸水率 [%]: 0.11
  • 缺口冲击强度: 0.166
  • 断裂伸长率 [%]: 63.0
  • 弯曲强度 [MPa]: 37.0
  • 弯曲模量 [MPa]: 4.80
 
Physical PropertiesMetricEnglishComments
Density 1.45 - 1.60 g/cc0.0524 - 0.0578 lb/in³Average value: 1.53 g/cc Grade Count:21
Apparent Bulk Density 0.500 - 0.670 g/cc0.0181 - 0.0242 lb/in³Average value: 0.549 g/cc Grade Count:8
Water Absorption 0.110 - 0.400 %0.110 - 0.400 %Average value: 0.239 % Grade Count:21
Linear Mold Shrinkage 0.00281 - 0.00900 cm/cm0.00281 - 0.00900 in/inAverage value: 0.00522 cm/cm Grade Count:21
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 73.0 - 91.073.0 - 91.0Average value: 81.3 Grade Count:15
Tensile Strength, Ultimate 37.0 - 60.0 MPa5370 - 8700 psiAverage value: 51.9 MPa Grade Count:21
Elongation at Break 0.460 - 0.970 %0.460 - 0.970 %Average value: 0.677 % Grade Count:15
Modulus of Elasticity 8.40 - 11.6 GPa1220 - 1680 ksiAverage value: 9.93 GPa Grade Count:15
Flexural Yield Strength 63.0 - 100 MPa9140 - 14500 psiAverage value: 82.9 MPa Grade Count:21
Flexural Modulus 4.80 - 10.5 GPa696 - 1520 ksiAverage value: 8.22 GPa Grade Count:21
Compressive Yield Strength 153 - 235 MPa22200 - 34100 psiAverage value: 187 MPa Grade Count:21
Poissons Ratio 0.330 - 0.3400.330 - 0.340Average value: 0.333 Grade Count:4
Shear Modulus 3.20 - 3.84 GPa464 - 557 ksiAverage value: 3.66 GPa Grade Count:4
Izod Impact, Notched 0.166 - 0.310 J/cm0.311 - 0.581 ft-lb/inAverage value: 0.220 J/cm Grade Count:20
Charpy Impact, Notched 0.182 - 0.310 J/cm²0.866 - 1.48 ft-lb/in²Average value: 0.218 J/cm² Grade Count:15
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 2.20e+10 - 3.90e+12 ohm-cm2.20e+10 - 3.90e+12 ohm-cmAverage value: 7.76e+11 ohm-cm Grade Count:19
Dielectric Constant 4.80 - 6.204.80 - 6.20Average value: 5.45 Grade Count:15
Dielectric Strength 6.20 - 17.4 kV/mm157 - 442 kV/inAverage value: 11.6 kV/mm Grade Count:21
Dissipation Factor 0.0274 - 0.08600.0274 - 0.0860Average value: 0.0549 Grade Count:15
Arc Resistance 151 - 185 sec151 - 185 secAverage value: 173 sec Grade Count:15
Comparative Tracking Index 175 - 200 V175 - 200 VAverage value: 178 V Grade Count:21
 
Thermal PropertiesMetricEnglishComments
CTE, linear 42.0 - 58.0 µm/m-°C
@Temperature 40.0 - 130 °C
23.3 - 32.2 µin/in-°F
@Temperature 104 - 266 °F
Average value: 47.9 µm/m-°C Grade Count:7
Thermal Conductivity 0.420 - 0.570 W/m-K
@Temperature 100 - 100 °C
2.91 - 3.96 BTU-in/hr-ft²-°F
@Temperature 212 - 212 °F
Average value: 0.490 W/m-K Grade Count:5
Maximum Service Temperature, Air 190 - 216 °C374 - 421 °FAverage value: 202 °C Grade Count:15
Deflection Temperature at 1.8 MPa (264 psi) 163 - 215 °C325 - 419 °FAverage value: 187 °C Grade Count:17
Flammability, UL94 V-1 - V-0V-1 - V-0Grade Count:16
Oxygen Index 27.0 - 42.0 %27.0 - 42.0 %Average value: 33.8 % Grade Count:9
Shrinkage 0.0860 - 0.340 %0.0860 - 0.340 %Average value: 0.209 % Grade Count:13

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34748.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Mineral/Flock Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4