- 吸水率 [%]: 0.03
- 缺口冲击强度: 0.214
- 弯曲强度 [MPa]: 90.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.02 g/cc | 2.02 g/cc | ASTM D792 |
| Bulk Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D1895 |
| Water Absorption | 0.030 % | 0.030 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D6289 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 90.0 MPa | 13100 psi | ASTM D638 |
| Tensile Modulus | 25.5 GPa | 3700 ksi | ASTM D638 |
| Flexural Strength | 131 MPa | 19000 psi | ASTM D790 |
| Compressive Strength | 241 MPa | 35000 psi | ASTM D695 |
| Izod Impact, Notched | 0.214 J/cm | 0.401 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.9 @Frequency 1e+6 Hz | 4.9 @Frequency 1e+6 Hz | ASTM D150 |
| 5.0 @Frequency 1000 Hz | 5.0 @Frequency 1000 Hz | ASTM D150 | |
| 5.1 @Frequency 60 Hz | 5.1 @Frequency 60 Hz | ASTM D150 | |
| Dielectric Strength | 9.84 kV/mm | 250 kV/in | Step by Step; ASTM D149 |
| 15.0 kV/mm | 380 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.030 @Frequency 1000 Hz | 0.030 @Frequency 1000 Hz | ASTM D150 |
| 0.030 @Frequency 1e+6 Hz | 0.030 @Frequency 1e+6 Hz | ASTM D150 | |
| 0.040 @Frequency 60 Hz | 0.040 @Frequency 60 Hz | ASTM D150 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |