- 密度 [g/cm3]: 1.73
- 吸水率 [%]: 0.15
- 缺口冲击强度: 0.45
- 弯曲强度 [MPa]: 73.0
- 弯曲模量 [MPa]: 12.4
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.660 g/cc | 0.0238 lb/in³ | ASTM D1895 |
| Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
| Water Absorption | 0.15 % | 0.15 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00206 cm/cm | 0.00206 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 88 | 88 | ASTM D785 |
| Tensile Strength, Ultimate | 73.0 MPa | 10600 psi | ASTM D638 |
| Elongation at Break | 0.83 % | 0.83 % | ASTM D638 |
| Tensile Modulus | 15.4 GPa | 2230 ksi | ASTM D638 |
| Flexural Strength | 123 MPa | 17800 psi | ASTM D790 |
| Flexural Modulus | 12.4 GPa | 1800 ksi | ASTM D790 |
| Compressive Strength | 166 MPa | 24100 psi | ASTM D695 |
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.299 J/cm² | 1.42 ft-lb/in² | ASTM D256 |
| Impact | 136 | 136 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.90e+11 ohm-cm | 1.90e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.1 | 5.1 | ASTM D150 |
| Dielectric Strength | 12.5 kV/mm | 318 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.046 | 0.046 | ASTM D150 |
| Arc Resistance | 185 sec | 185 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 220 °C | 428 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 265 °C | 509 °F | ASTM D648 |
| Shrinkage | 0.14 % | 0.14 % | 72 hr, 120ºC; ASTM D1299 |