Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled

Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled 物性表: Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled物性表及特性介绍,Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled注塑参数详情,如需Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 4.0
  • 密度 [g/cm3]: 1.25
  • 吸水率 [%]: 0.05
  • 缺口冲击强度: 0.22
  • 拉伸强度 [MPa]: 44.0
  • 断裂伸长率 [%]: 77.9
  • 弯曲强度 [MPa]: 40.7
  • 弯曲模量 [MPa]: 2.10
  • 硬度: 117.0
  • 热变形温度 [℃]: 154.0
 
Physical PropertiesMetricEnglishComments
Density 1.25 - 1.73 g/cc0.0452 - 0.0625 lb/in³Average value: 1.52 g/cc Grade Count:46
Filler Content 10.0 - 40.0 %10.0 - 40.0 %Average value: 26.7 % Grade Count:6
Water Absorption 0.0500 - 0.500 %0.0500 - 0.500 %Average value: 0.147 % Grade Count:22
Moisture Absorption at Equilibrium 0.0500 - 0.200 %0.0500 - 0.200 %Average value: 0.139 % Grade Count:10
Water Absorption at Saturation 0.450 - 0.500 %0.450 - 0.500 %Average value: 0.467 % Grade Count:3
Viscosity Measurement 70.0 - 120
@Temperature 240 - 300 °C
70.0 - 120
@Temperature 464 - 572 °F
Average value: 99.5 Grade Count:2
Linear Mold Shrinkage 0.00200 - 0.0400 cm/cm0.00200 - 0.0400 in/inAverage value: 0.0123 cm/cm Grade Count:42
Linear Mold Shrinkage, 6.35 mm section 0.00300 - 0.0220 cm/cm0.00300 - 0.0220 in/inAverage value: 0.0134 cm/cm Grade Count:11
Linear Mold Shrinkage, Transverse 0.00200 - 0.0400 cm/cm0.00200 - 0.0400 in/inAverage value: 0.0144 cm/cm Grade Count:15
Melt Flow 4.00 - 48.0 g/10 min4.00 - 48.0 g/10 minAverage value: 21.0 g/10 min Grade Count:11
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 117 - 120117 - 120Average value: 118 Grade Count:11
Ball Indentation Hardness 150 - 200 MPa21800 - 29000 psiAverage value: 170 MPa Grade Count:4
Tensile Strength, Ultimate 40.7 - 130 MPa5900 - 18900 psiAverage value: 65.0 MPa Grade Count:34
Tensile Strength, Yield 44.0 - 120 MPa6380 - 17400 psiAverage value: 55.2 MPa Grade Count:13
Elongation at Break 1.80 - 16.0 %1.80 - 16.0 %Average value: 3.86 % Grade Count:45
Elongation at Yield 2.80 - 4.20 %2.80 - 4.20 %Average value: 3.50 % Grade Count:4
Modulus of Elasticity 3.10 - 15.2 GPa450 - 2200 ksiAverage value: 5.20 GPa Grade Count:29
Flexural Yield Strength 77.9 - 207 MPa11300 - 30000 psiAverage value: 110 MPa Grade Count:36
Flexural Modulus 2.10 - 13.1 GPa305 - 1900 ksiAverage value: 4.73 GPa Grade Count:39
Compressive Yield Strength 49.6 - 138 MPa7200 - 20000 psiAverage value: 73.8 MPa Grade Count:8
Izod Impact, Notched 0.220 - 12.0 J/cm0.412 - 22.5 ft-lb/inAverage value: 0.998 J/cm Grade Count:29
Izod Impact, Unnotched 1.72 - 6.41 J/cm3.22 - 12.0 ft-lb/inAverage value: 3.71 J/cm Grade Count:20
Izod Impact, Notched (ISO) 2.00 - 10.0 kJ/m²0.952 - 4.76 ft-lb/in²Average value: 4.44 kJ/m² Grade Count:8
 3.00 - 10.0 kJ/m²
@Temperature -30.0 - -30.0 °C
1.43 - 4.76 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 5.33 kJ/m² Grade Count:3
Izod Impact, Unnotched (ISO) 11.0 - 80.0 kJ/m²5.23 - 38.1 ft-lb/in²Average value: 30.8 kJ/m² Grade Count:8
 25.0 - 190 kJ/m²
@Temperature -30.0 - -30.0 °C
11.9 - 90.4 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 81.7 kJ/m² Grade Count:3
Charpy Impact Unnotched 2.20 - 5.00 J/cm²10.5 - 23.8 ft-lb/in²Average value: 3.56 J/cm² Grade Count:11
 1.90 - 4.50 J/cm²
@Temperature -30.0 - 30.0 °C
9.04 - 21.4 ft-lb/in²
@Temperature -22.0 - 86.0 °F
Average value: 3.03 J/cm² Grade Count:10
Charpy Impact, Notched 0.170 - 1.00 J/cm²0.809 - 4.76 ft-lb/in²Average value: 0.439 J/cm² Grade Count:13
 0.200 - 1.00 J/cm²
@Temperature -30.0 - 30.0 °C
0.952 - 4.76 ft-lb/in²
@Temperature -22.0 - 86.0 °F
Average value: 0.516 J/cm² Grade Count:8
Tensile Creep Modulus, 1000 hours 1300 - 2700 MPa189000 - 392000 psiAverage value: 2070 MPa Grade Count:3
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+13 - 1.00e+18 ohm-cm1.00e+13 - 1.00e+18 ohm-cmAverage value: 4.12e+16 ohm-cm Grade Count:30
Surface Resistance 1.00e+13 - 1.00e+17 ohm1.00e+13 - 1.00e+17 ohmAverage value: 1.34e+16 ohm Grade Count:16
Dielectric Constant 2.60 - 4.202.60 - 4.20Average value: 3.72 Grade Count:17
Dielectric Strength 15.0 - 100 kV/mm381 - 2540 kV/inAverage value: 28.3 kV/mm Grade Count:25
Dissipation Factor 0.00120 - 0.1300.00120 - 0.130Average value: 0.0202 Grade Count:14
Arc Resistance 120 - 150 sec120 - 150 secAverage value: 136 sec Grade Count:8
Comparative Tracking Index 125 - 500 V125 - 500 VAverage value: 275 V Grade Count:11
 
Thermal PropertiesMetricEnglishComments
CTE, linear 0.700 - 100 µm/m-°C0.389 - 55.6 µin/in-°FAverage value: 60.8 µm/m-°C Grade Count:24
 140 - 140 µm/m-°C
@Temperature 60.0 - 138 °C
77.8 - 77.8 µin/in-°F
@Temperature 140 - 280 °F
Average value: 140 µm/m-°C Grade Count:1
CTE, linear, Transverse to Flow 68.0 - 100 µm/m-°C37.8 - 55.6 µin/in-°FAverage value: 84.1 µm/m-°C Grade Count:11
 150 - 150 µm/m-°C
@Temperature 60.0 - 138 °C
83.3 - 83.3 µin/in-°F
@Temperature 140 - 280 °F
Average value: 150 µm/m-°C Grade Count:1
Thermal Conductivity 0.159 - 0.270 W/m-K1.10 - 1.87 BTU-in/hr-ft²-°FAverage value: 0.207 W/m-K Grade Count:10
Melting Point 200 - 228 °C392 - 442 °FAverage value: 224 °C Grade Count:18
Deflection Temperature at 0.46 MPa (66 psi) 154 - 220 °C310 - 428 °FAverage value: 192 °C Grade Count:29
Deflection Temperature at 1.8 MPa (264 psi) 62.8 - 213 °C145 - 415 °FAverage value: 134 °C Grade Count:44
Vicat Softening Point 180 - 245 °C356 - 473 °FAverage value: 203 °C Grade Count:10
Flammability, UL94 HB - V-0HB - V-0Grade Count:33
Oxygen Index 21.0 - 23.0 %21.0 - 23.0 %Average value: 22.3 % Grade Count:3
Glow Wire Test 650 - 750 °C1200 - 1380 °FAverage value: 717 °C Grade Count:9
 
Processing PropertiesMetricEnglishComments
Processing Temperature 20.0 - 271 °C68.0 - 520 °FAverage value: 208 °C Grade Count:17
Feed Temperature 50.0 - 240 °C122 - 464 °FAverage value: 118 °C Grade Count:3
Melt Temperature 230 - 280 °C446 - 536 °FAverage value: 252 °C Grade Count:15
Mold Temperature 30.0 - 107 °C86.0 - 225 °FAverage value: 78.8 °C Grade Count:28
Drying Temperature 80.0 - 130 °C176 - 266 °FAverage value: 119 °C Grade Count:15
Dry Time 2.00 - 12.0 hour2.00 - 12.0 hourAverage value: 3.89 hour Grade Count:14
Moisture Content 0.000 - 0.100 %0.000 - 0.100 %Average value: 0.0525 % Grade Count:8
Injection Pressure 50.0 - 103 MPa7250 - 15000 psiAverage value: 84.1 MPa Grade Count:16

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-37752.html

免责声明: 本文 Overview of materials for Polybutylene Terephthalate (PBT), Glass Bead Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4