Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced

Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced 物性表: Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced物性表及特性介绍,Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced注塑参数详情,如需Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.14
  • 缺口冲击强度: 0.32
  • 断裂伸长率 [%]: 97.0
  • 弯曲强度 [MPa]: 62.0
  • 弯曲模量 [MPa]: 4.00
  • 热变形温度 [℃]: 259.0
 
Physical PropertiesMetricEnglishComments
Density 1.14 - 1.58 g/cc0.0412 - 0.0571 lb/in³Average value: 1.42 g/cc Grade Count:7
Filler Content 20.0 %20.0 %Average value: 20.0 % Grade Count:4
Linear Mold Shrinkage 0.00300 - 0.00600 cm/cm0.00300 - 0.00600 in/inAverage value: 0.00433 cm/cm Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 62.0 - 100 MPa8990 - 14500 psiAverage value: 93.8 MPa Grade Count:7
Elongation at Break 1.80 - 3.30 %1.80 - 3.30 %Average value: 2.34 % Grade Count:7
Modulus of Elasticity 5.50 - 8.00 GPa798 - 1160 ksiAverage value: 7.05 GPa Grade Count:6
Flexural Yield Strength 97.0 - 155 MPa14100 - 22500 psiAverage value: 142 MPa Grade Count:7
Flexural Modulus 4.00 - 7.40 GPa580 - 1070 ksiAverage value: 5.96 GPa Grade Count:7
Izod Impact, Notched 0.320 - 1.10 J/cm0.600 - 2.06 ft-lb/inAverage value: 0.618 J/cm Grade Count:4
 0.32034 - 1.00 J/cm
@Temperature -40.0 - -40.0 °C
0.60013 - 1.87 ft-lb/in
@Temperature -40.0 - -40.0 °F
Average value: 0.660 J/cm Grade Count:2
Izod Impact, Unnotched 2.56 - 430 J/cm4.80 - 806 ft-lb/inAverage value: 112 J/cm Grade Count:4
 2.1356 - 2.1356 J/cm
@Temperature -40.0 - -40.0 °C
4.0009 - 4.0009 ft-lb/in
@Temperature -40.0 - -40.0 °F
Average value: 2.14 J/cm Grade Count:1
Izod Impact, Notched (ISO) 5.00 - 8.00 kJ/m²2.38 - 3.81 ft-lb/in²Average value: 5.83 kJ/m² Grade Count:6
Charpy Impact Unnotched 3.00 - 5.00 J/cm²14.3 - 23.8 ft-lb/in²Average value: 3.50 J/cm² Grade Count:6
 3.00 - 3.00 J/cm²
@Temperature -30.0 - -30.0 °C
14.3 - 14.3 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 3.00 J/cm² Grade Count:1
Charpy Impact, Notched 0.500 - 0.850 J/cm²2.38 - 4.05 ft-lb/in²Average value: 0.608 J/cm² Grade Count:6
 0.700 - 0.700 J/cm²
@Temperature -30.0 - -30.0 °C
3.33 - 3.33 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 0.700 J/cm² Grade Count:1
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmAverage value: 1.00e+15 ohm-cm Grade Count:3
Surface Resistance 1.00e+15 - 1.00e+17 ohm1.00e+15 - 1.00e+17 ohmAverage value: 3.70e+16 ohm Grade Count:3
Dielectric Strength 19.7 - 41.0 kV/mm500 - 1040 kV/inAverage value: 27.1 kV/mm Grade Count:3
 
Thermal PropertiesMetricEnglishComments
Melting Point 283 - 285 °C541 - 545 °FAverage value: 284 °C Grade Count:6
Deflection Temperature at 0.46 MPa (66 psi) 259 - 272 °C498 - 522 °FAverage value: 265 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi) 194 - 256 °C381 - 493 °FAverage value: 232 °C Grade Count:7
Flammability, UL94 HB - V-0HB - V-0Grade Count:5
 
Processing PropertiesMetricEnglishComments
Melt Temperature 295 - 310 °C563 - 590 °FAverage value: 302 °C Grade Count:7
Mold Temperature 80.0 - 175 °C176 - 347 °FAverage value: 114 °C Grade Count:7
Drying Temperature 95.0 - 150 °C203 - 302 °FAverage value: 106 °C Grade Count:7
Dry Time 4.00 - 6.00 hour4.00 - 6.00 hourAverage value: 5.00 hour Grade Count:7
Moisture Content 0.0300 %0.0300 %Average value: 0.0300 % Grade Count:6

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39641.html

免责声明: 本文 Overview of materials for Polycyclohexylenedimethylene Terephthalate (PCT), 20% Glass Reinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4