Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene物性表参数

Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene

Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene 物性表: Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene物性表及特性介绍,Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene注塑参数详情,如需Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 1.0

Physical Properties	Metric	English	Comments

Specific Gravity	0.916 g/cc	0.916 g/cc	ASTM D1505/D792
Thickness	25.0 microns	0.984 mil
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 190 °C	1.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	1080 %	1080 %	ASTM D882
Film Elongation at Break, TD	1360 %	1360 %	ASTM D882
Elmendorf Tear Strength MD	300 g	300 g	gF; ASTM D1922
Elmendorf Tear Strength TD	510 g	510 g	gF; ASTM D1922
Dart drop Test	150 g	0.331 lb	gF/50%f; ASTM D1709
Film Tensile Strength at Break, MD	40.0 MPa	5800 psi	ASTM D882
Film Tensile Strength at Break, TD	40.0 MPa	5800 psi	ASTM D882
1% Secant Modulus, MD	200 MPa	29000 psi	ASTM D882
1% Secant Modulus, TD	210 MPa	30500 psi	ASTM D882

Optical Properties	Metric	English	Comments
Haze	24 % @Thickness 0.0250 mm	24 % @Thickness 0.000984 in	ASTM D1003
Gloss	69 % @Thickness 0.0250 mm	69 % @Thickness 0.000984 in	60°; ASTM D2457

关键词:
供应
LLDPE
Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-39888.html

免责声明: 本文 Braskem LH118 Blown Film Extrusion Linear Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息