塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66

DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66

DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.33
  • 吸水率 [%]: 0.85
  • 成型收缩率 [%]: 0.004
  • 缺口冲击强度: 2.19
  • 弯曲模量 [MPa]: 5.068
  • 硬度: 110.0
  • 热变形温度 [℃]: 261.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.33 g/cc1.33 g/ccDAM; ASTM D792
Density 1.33 g/cc0.0480 lb/in³DAM; ISO 1183
Filler Content 33 %33 %DAM
Water Absorption  0.85 %
@Temperature 23.0 °C		0.85 %
@Temperature 73.4 °F		Immersion 24h; DAM; ISO 62, Similar to
 1.5 %
@Temperature 23.0 °C		1.5 %
@Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 4.5 %
@Temperature 23.0 °C		4.5 %
@Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Linear Mold Shrinkage  0.0040 cm/cm
@Thickness 3.20 mm		0.0040 in/in
@Thickness 0.126 in		Flow; DAM
 0.012 cm/cm
@Thickness 3.20 mm		0.012 in/in
@Thickness 0.126 in		Transverse; DAM
Linear Mold Shrinkage, Flow 0.0030 cm/cm
@Thickness 2.00 mm		0.0030 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.0070 cm/cm
@Thickness 2.00 mm		0.0070 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 7070DAM; ISO 2039/2
Hardness, Rockwell R 110110DAM; ISO 2039/2
Tensile Strength at Break  108 MPa
@Temperature 23.0 °C		15700 psi
@Temperature 73.4 °F		50%RH; ISO 527
 146 MPa
@Temperature 23.0 °C		21200 psi
@Temperature 73.4 °F		DAM; ISO 527
Tensile Strength  110 MPa
@Temperature 23.0 °C		16000 psi
@Temperature 73.4 °F		50%RH; ASTM D638
 145 MPa
@Temperature 23.0 °C		21000 psi
@Temperature 73.4 °F		DAM; ASTM D638
Tensile Stress  19.0 MPa
@Strain 3.92 %,
Temperature 40.0 °C		2760 psi
@Strain 3.92 %,
Temperature 104 °F		DAM; ISO 527
 19.18 MPa
@Strain 0.620 %,
Temperature 120 °C		2782 psi
@Strain 0.620 %,
Temperature 248 °F		50%RH; ISO 527
 21.03 MPa
@Strain 0.660 %,
Temperature 120 °C		3050 psi
@Strain 0.660 %,
Temperature 248 °F		DAM; ISO 527
 21.14 MPa
@Strain 0.600 %,
Temperature 90.0 °C		3066 psi
@Strain 0.600 %,
Temperature 194 °F		50%RH; ISO 527
 22.6 MPa
@Strain 0.590 %,
Temperature 60.0 °C		3280 psi
@Strain 0.590 %,
Temperature 140 °F		50%RH; ISO 527
 24.19 MPa
@Strain 0.680 %,
Temperature 90.0 °C		3508 psi
@Strain 0.680 %,
Temperature 194 °F		DAM; ISO 527
 27.72 MPa
@Strain 0.630 %,
Temperature 40.0 °C		4020 psi
@Strain 0.630 %,
Temperature 104 °F		50%RH; ISO 527
 30.07 MPa
@Strain 0.400 %,
Temperature 40.0 °C		4361 psi
@Strain 0.400 %,
Temperature 104 °F		DAM; ISO 527
 30.46 MPa
@Strain 0.580 %,
Temperature 60.0 °C		4418 psi
@Strain 0.580 %,
Temperature 140 °F		DAM; ISO 527
 30.73 MPa
@Strain 1.14 %,
Temperature 120 °C		4457 psi
@Strain 1.14 %,
Temperature 248 °F		50%RH; ISO 527
 30.84 MPa
@Strain 0.340 %,
Temperature 23.0 °C		4473 psi
@Strain 0.340 %,
Temperature 73.4 °F		DAM; ISO 527
 32.25 MPa
@Strain 0.570 %,
Temperature 23.0 °C		4677 psi
@Strain 0.570 %,
Temperature 73.4 °F		50%RH; ISO 527
 34.19 MPa
@Strain 1.11 %,
Temperature 90.0 °C		4959 psi
@Strain 1.11 %,
Temperature 194 °F		50%RH; ISO 527
 35.86 MPa
@Strain 1.36 %,
Temperature 120 °C		5201 psi
@Strain 1.36 %,
Temperature 248 °F		DAM; ISO 527
 37.39 MPa
@Strain 1.09 %,
Temperature 60.0 °C		5423 psi
@Strain 1.09 %,
Temperature 140 °F		50%RH; ISO 527
 39.45 MPa
@Strain 1.73 %,
Temperature 120 °C		5722 psi
@Strain 1.73 %,
Temperature 248 °F		50%RH; ISO 527
 40.47 MPa
@Strain 1.33 %,
Temperature 90.0 °C		5870 psi
@Strain 1.33 %,
Temperature 194 °F		DAM; ISO 527
 44.58 MPa
@Strain 1.98 %,
Temperature 120 °C		6466 psi
@Strain 1.98 %,
Temperature 248 °F		DAM; ISO 527
 44.7 MPa
@Strain 1.68 %,
Temperature 90.0 °C		6480 psi
@Strain 1.68 %,
Temperature 194 °F		50%RH; ISO 527
 44.8 MPa
@Strain 2.26 %,
Temperature 120 °C		6500 psi
@Strain 2.26 %,
Temperature 248 °F		50%RH; ISO 527
 46.77 MPa
@Strain 1.22 %,
Temperature 40.0 °C		6783 psi
@Strain 1.22 %,
Temperature 104 °F		50%RH; ISO 527
 49.02 MPa
@Strain 2.85 %,
Temperature 120 °C		7110 psi
@Strain 2.85 %,
Temperature 248 °F		50%RH; ISO 527
 49.88 MPa
@Strain 1.65 %,
Temperature 60.0 °C		7234 psi
@Strain 1.65 %,
Temperature 140 °F		50%RH; ISO 527
 51.03 MPa
@Strain 1.11 %,
Temperature 60.0 °C		7401 psi
@Strain 1.11 %,
Temperature 140 °F		DAM; ISO 527
 51.6 MPa
@Strain 2.68 %,
Temperature 120 °C		7480 psi
@Strain 2.68 %,
Temperature 248 °F		DAM; ISO 527
 51.63 MPa
@Strain 3.37 %,
Temperature 120 °C		7488 psi
@Strain 3.37 %,
Temperature 248 °F		50%RH; ISO 527
 52.19 MPa
@Strain 2.24 %,
Temperature 90.0 °C		7570 psi
@Strain 2.24 %,
Temperature 194 °F		50%RH; ISO 527
 53.29 MPa
@Strain 2.04 %,
Temperature 90.0 °C		7729 psi
@Strain 2.04 %,
Temperature 194 °F		DAM; ISO 527
 53.79 MPa
@Strain 3.96 %,
Temperature 120 °C		7802 psi
@Strain 3.96 %,
Temperature 248 °F		50%RH; ISO 527
 54.45 MPa
@Strain 1.09 %,
Temperature 23.0 °C		7897 psi
@Strain 1.09 %,
Temperature 73.4 °F		50%RH; ISO 527
 55.07 MPa
@Strain 4.48 %,
Temperature 120 °C		7987 psi
@Strain 4.48 %,
Temperature 248 °F		50%RH; ISO 527
 55.63 MPa
@Strain 5.66 %,
Temperature 120 °C		8068 psi
@Strain 5.66 %,
Temperature 248 °F		50%RH; ISO 527
 55.86 MPa
@Strain 3.30 %,
Temperature 120 °C		8102 psi
@Strain 3.30 %,
Temperature 248 °F		DAM; ISO 527
 55.89 MPa
@Strain 5.07 %,
Temperature 120 °C		8106 psi
@Strain 5.07 %,
Temperature 248 °F		50%RH; ISO 527
 55.9 MPa
@Strain 0.660 %,
Temperature 23.0 °C		8110 psi
@Strain 0.660 %,
Temperature 73.4 °F		DAM; ISO 527
 57.09 MPa
@Strain 2.81 %,
Temperature 90.0 °C		8280 psi
@Strain 2.81 %,
Temperature 194 °F		50%RH; ISO 527
 58.13 MPa
@Strain 0.830 %,
Temperature 40.0 °C		8431 psi
@Strain 0.830 %,
Temperature 104 °F		DAM; ISO 527
 58.96 MPa
@Strain 3.92 %,
Temperature 120 °C		8551 psi
@Strain 3.92 %,
Temperature 248 °F		DAM; ISO 527
 58.97 MPa
@Strain 2.21 %,
Temperature 60.0 °C		8553 psi
@Strain 2.21 %,
Temperature 140 °F		50%RH; ISO 527
 60.13 MPa
@Strain 3.32 %,
Temperature 90.0 °C		8721 psi
@Strain 3.32 %,
Temperature 194 °F		50%RH; ISO 527
 60.78 MPa
@Strain 1.81 %,
Temperature 40.0 °C		8815 psi
@Strain 1.81 %,
Temperature 104 °F		50%RH; ISO 527
 61.57 MPa
@Strain 2.69 %,
Temperature 90.0 °C		8930 psi
@Strain 2.69 %,
Temperature 194 °F		DAM; ISO 527
 61.63 MPa
@Strain 4.62 %,
Temperature 120 °C		8939 psi
@Strain 4.62 %,
Temperature 248 °F		DAM; ISO 527
 62.48 MPa
@Strain 3.89 %,
Temperature 90.0 °C		9062 psi
@Strain 3.89 %,
Temperature 194 °F		50%RH; ISO 527
 63.23 MPa
@Strain 5.24 %,
Temperature 120 °C		9171 psi
@Strain 5.24 %,
Temperature 248 °F		DAM; ISO 527
 63.84 MPa
@Strain 5.53 %,
Temperature 90.0 °C		9259 psi
@Strain 5.53 %,
Temperature 194 °F		50%RH; ISO 527
 64.02 MPa
@Strain 4.46 %,
Temperature 90.0 °C		9285 psi
@Strain 4.46 %,
Temperature 194 °F		50%RH; ISO 527
 64.24 MPa
@Strain 5.85 %,
Temperature 120 °C		9317 psi
@Strain 5.85 %,
Temperature 248 °F		DAM; ISO 527
 64.71 MPa
@Strain 4.96 %,
Temperature 90.0 °C		9385 psi
@Strain 4.96 %,
Temperature 194 °F		50%RH; ISO 527
 64.83 MPa
@Strain 2.71 %,
Temperature 60.0 °C		9403 psi
@Strain 2.71 %,
Temperature 140 °F		50%RH; ISO 527
 65.3 MPa
@Strain 6.56 %,
Temperature 120 °C		9470 psi
@Strain 6.56 %,
Temperature 248 °F		DAM; ISO 527
 65.75 MPa
@Strain 1.65 %,
Temperature 60.0 °C		9536 psi
@Strain 1.65 %,
Temperature 140 °F		DAM; ISO 527
 67.27 MPa
@Strain 3.34 %,
Temperature 90.0 °C		9757 psi
@Strain 3.34 %,
Temperature 194 °F		DAM; ISO 527
 69.34 MPa
@Strain 3.27 %,
Temperature 60.0 °C		10060 psi
@Strain 3.27 %,
Temperature 140 °F		50%RH; ISO 527
 70.43 MPa
@Strain 1.61 %,
Temperature 23.0 °C		10220 psi
@Strain 1.61 %,
Temperature 73.4 °F		50%RH; ISO 527
 70.96 MPa
@Strain 2.40 %,
Temperature 40.0 °C		10290 psi
@Strain 2.40 %,
Temperature 104 °F		50%RH; ISO 527
 71.19 MPa
@Strain 3.98 %,
Temperature 90.0 °C		10330 psi
@Strain 3.98 %,
Temperature 194 °F		DAM; ISO 527
 72.29 MPa
@Strain 3.83 %,
Temperature 60.0 °C		10480 psi
@Strain 3.83 %,
Temperature 140 °F		50%RH; ISO 527
 73.93 MPa
@Strain 4.63 %,
Temperature 90.0 °C		10720 psi
@Strain 4.63 %,
Temperature 194 °F		DAM; ISO 527
 74.04 MPa
@Strain 4.33 %,
Temperature 60.0 °C		10740 psi
@Strain 4.33 %,
Temperature 140 °F		50%RH; ISO 527
 74.91 MPa
@Strain 2.09 %,
Temperature 60.0 °C		10860 psi
@Strain 2.09 %,
Temperature 140 °F		DAM; ISO 527
 75.14 MPa
@Strain 4.89 %,
Temperature 60.0 °C		10900 psi
@Strain 4.89 %,
Temperature 140 °F		50%RH; ISO 527
 75.21 MPa
@Strain 5.45 %,
Temperature 60.0 °C		10910 psi
@Strain 5.45 %,
Temperature 140 °F		50%RH; ISO 527
 75.71 MPa
@Strain 5.34 %,
Temperature 90.0 °C		10980 psi
@Strain 5.34 %,
Temperature 194 °F		DAM; ISO 527
 75.92 MPa
@Strain 6.64 %,
Temperature 90.0 °C		11010 psi
@Strain 6.64 %,
Temperature 194 °F		DAM; ISO 527
 76.5 MPa
@Strain 5.99 %,
Temperature 90.0 °C		11100 psi
@Strain 5.99 %,
Temperature 194 °F		DAM; ISO 527
 76.92 MPa
@Strain 1.20 %,
Temperature 40.0 °C		11160 psi
@Strain 1.20 %,
Temperature 104 °F		DAM; ISO 527
 77.13 MPa
@Strain 0.980 %,
Temperature 23.0 °C		11190 psi
@Strain 0.980 %,
Temperature 73.4 °F		DAM; ISO 527
 77.83 MPa
@Strain 2.99 %,
Temperature 40.0 °C		11290 psi
@Strain 2.99 %,
Temperature 104 °F		50%RH; ISO 527
 82.31 MPa
@Strain 3.58 %,
Temperature 40.0 °C		11940 psi
@Strain 3.58 %,
Temperature 104 °F		50%RH; ISO 527
 82.81 MPa
@Strain 2.13 %,
Temperature 23.0 °C		12010 psi
@Strain 2.13 %,
Temperature 73.4 °F		50%RH; ISO 527
 83.42 MPa
@Strain 2.63 %,
Temperature 60.0 °C		12100 psi
@Strain 2.63 %,
Temperature 140 °F		DAM; ISO 527
 85.05 MPa
@Strain 4.18 %,
Temperature 40.0 °C		12340 psi
@Strain 4.18 %,
Temperature 104 °F		50%RH; ISO 527
 86.51 MPa
@Strain 4.77 %,
Temperature 40.0 °C		12550 psi
@Strain 4.77 %,
Temperature 104 °F		50%RH; ISO 527
 86.59 MPa
@Strain 5.95 %,
Temperature 40.0 °C		12560 psi
@Strain 5.95 %,
Temperature 104 °F		50%RH; ISO 527
 87.01 MPa
@Strain 5.36 %,
Temperature 40.0 °C		12620 psi
@Strain 5.36 %,
Temperature 104 °F		50%RH; ISO 527
 89.15 MPa
@Strain 3.16 %,
Temperature 60.0 °C		12930 psi
@Strain 3.16 %,
Temperature 140 °F		DAM; ISO 527
 90.189 MPa
@Strain 1.24 %,
Temperature 23.0 °C		13081 psi
@Strain 1.24 %,
Temperature 73.4 °F		DAM; ISO 527
 91.14 MPa
@Strain 1.57 %,
Temperature 40.0 °C		13220 psi
@Strain 1.57 %,
Temperature 104 °F		DAM; ISO 527
 91.27 MPa
@Strain 2.65 %,
Temperature 23.0 °C		13240 psi
@Strain 2.65 %,
Temperature 73.4 °F		50%RH; ISO 527
 92.6 MPa
@Strain 3.70 %,
Temperature 60.0 °C		13400 psi
@Strain 3.70 %,
Temperature 140 °F		DAM; ISO 527
 94.66 MPa
@Strain 4.23 %,
Temperature 60.0 °C		13730 psi
@Strain 4.23 %,
Temperature 140 °F		DAM; ISO 527
 95.52 MPa
@Strain 5.21 %,
Temperature 60.0 °C		13850 psi
@Strain 5.21 %,
Temperature 140 °F		DAM; ISO 527
 95.58 MPa
@Strain 4.77 %,
Temperature 60.0 °C		13860 psi
@Strain 4.77 %,
Temperature 140 °F		DAM; ISO 527
 96.7 MPa
@Strain 3.18 %,
Temperature 23.0 °C		14000 psi
@Strain 3.18 %,
Temperature 73.4 °F		50%RH; ISO 527
 100.16 MPa
@Strain 3.70 %,
Temperature 23.0 °C		14527 psi
@Strain 3.70 %,
Temperature 73.4 °F		50%RH; ISO 527
 101.73 MPa
@Strain 5.26 %,
Temperature 23.0 °C		14755 psi
@Strain 5.26 %,
Temperature 73.4 °F		50%RH; ISO 527
 101.83 MPa
@Strain 4.22 %,
Temperature 23.0 °C		14769 psi
@Strain 4.22 %,
Temperature 73.4 °F		50%RH; ISO 527
 102.34 MPa
@Strain 4.74 %,
Temperature 23.0 °C		14843 psi
@Strain 4.74 %,
Temperature 73.4 °F		50%RH; ISO 527
 103.41 MPa
@Strain 2.00 %,
Temperature 40.0 °C		14998 psi
@Strain 2.00 %,
Temperature 104 °F		DAM; ISO 527
 104.045 MPa
@Strain 1.56 %,
Temperature 23.0 °C		15090.5 psi
@Strain 1.56 %,
Temperature 73.4 °F		DAM; ISO 527
 110.55 MPa
@Strain 2.37 %,
Temperature 40.0 °C		16034 psi
@Strain 2.37 %,
Temperature 104 °F		DAM; ISO 527
 114.49 MPa
@Strain 1.87 %,
Temperature 23.0 °C		16605 psi
@Strain 1.87 %,
Temperature 73.4 °F		DAM; ISO 527
 115.12 MPa
@Strain 2.74 %,
Temperature 40.0 °C		16697 psi
@Strain 2.74 %,
Temperature 104 °F		DAM; ISO 527
 117.9 MPa
@Strain 3.17 %,
Temperature 40.0 °C		17100 psi
@Strain 3.17 %,
Temperature 104 °F		DAM; ISO 527
 118.7 MPa
@Strain 3.54 %,
Temperature 40.0 °C		17220 psi
@Strain 3.54 %,
Temperature 104 °F		DAM; ISO 527
 122.445 MPa
@Strain 2.19 %,
Temperature 23.0 °C		17759.2 psi
@Strain 2.19 %,
Temperature 73.4 °F		DAM; ISO 527
 128.47 MPa
@Strain 2.51 %,
Temperature 23.0 °C		18633 psi
@Strain 2.51 %,
Temperature 73.4 °F		DAM; ISO 527
 132.78 MPa
@Strain 2.82 %,
Temperature 23.0 °C		19258 psi
@Strain 2.82 %,
Temperature 73.4 °F		DAM; ISO 527
 135.49 MPa
@Strain 3.14 %,
Temperature 23.0 °C		19651 psi
@Strain 3.14 %,
Temperature 73.4 °F		DAM; ISO 527
Elongation at Break  3.7 %
@Temperature 23.0 °C		3.7 %
@Temperature 73.4 °F		DAM; ISO 527
 4.0 %
@Temperature 23.0 °C		4.0 %
@Temperature 73.4 °F		DAM; ASTM D638
 5.0 %
@Temperature 23.0 °C		5.0 %
@Temperature 73.4 °F		50%RH; ASTM D638
 7.0 %
@Temperature 23.0 °C		7.0 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  6.20 GPa
@Temperature 23.0 °C		899 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 8.90 GPa
@Temperature 23.0 °C		1290 ksi
@Temperature 73.4 °F		DAM; ISO 527
Flexural Strength 205 MPa
@Temperature 23.0 °C		29700 psi
@Temperature 73.4 °F		DAM; ASTM D790
Flexural Modulus  5.068 GPa
@Temperature 23.0 °C		735.1 ksi
@Temperature 73.4 °F		50%RH; ASTM D790
 6.20 GPa
@Temperature 23.0 °C		899 ksi
@Temperature 73.4 °F		50%RH; ISO 178
 6.895 GPa
@Temperature 23.0 °C		1000 ksi
@Temperature 73.4 °F		DAM; ASTM D790
 7.50 GPa
@Temperature 23.0 °C		1090 ksi
@Temperature 73.4 °F		DAM; ISO 178
Shear Modulus  0.209 GPa
@Temperature 250 °C		30.3 ksi
@Temperature 482 °F		DAM; ISO 6721
 0.298 GPa
@Temperature 240 °C		43.2 ksi
@Temperature 464 °F		DAM; ISO 6721
 0.344 GPa
@Temperature 230 °C		49.9 ksi
@Temperature 446 °F		DAM; ISO 6721
 0.375 GPa
@Temperature 220 °C		54.4 ksi
@Temperature 428 °F		DAM; ISO 6721
 0.399 GPa
@Temperature 210 °C		57.9 ksi
@Temperature 410 °F		DAM; ISO 6721
 0.418 GPa
@Temperature 200 °C		60.6 ksi
@Temperature 392 °F		DAM; ISO 6721
 0.434 GPa
@Temperature 190 °C		62.9 ksi
@Temperature 374 °F		DAM; ISO 6721
 0.449 GPa
@Temperature 180 °C		65.1 ksi
@Temperature 356 °F		DAM; ISO 6721
 0.462 GPa
@Temperature 170 °C		67.0 ksi
@Temperature 338 °F		DAM; ISO 6721
 0.475 GPa
@Temperature 160 °C		68.9 ksi
@Temperature 320 °F		DAM; ISO 6721
 0.490 GPa
@Temperature 150 °C		71.1 ksi
@Temperature 302 °F		DAM; ISO 6721
 0.507 GPa
@Temperature 140 °C		73.5 ksi
@Temperature 284 °F		DAM; ISO 6721
 0.527 GPa
@Temperature 130 °C		76.4 ksi
@Temperature 266 °F		DAM; ISO 6721
 0.555 GPa
@Temperature 120 °C		80.5 ksi
@Temperature 248 °F		DAM; ISO 6721
 0.593 GPa
@Temperature 110 °C		86.0 ksi
@Temperature 230 °F		DAM; ISO 6721
 0.640 GPa
@Temperature 100 °C		92.8 ksi
@Temperature 212 °F		DAM; ISO 6721
 0.707 GPa
@Temperature 90.0 °C		103 ksi
@Temperature 194 °F		DAM; ISO 6721
 0.800 GPa
@Temperature 80.0 °C		116 ksi
@Temperature 176 °F		DAM; ISO 6721
 0.922 GPa
@Temperature 70.0 °C		134 ksi
@Temperature 158 °F		DAM; ISO 6721
 1.07 GPa
@Temperature 60.0 °C		155 ksi
@Temperature 140 °F		DAM; ISO 6721
 1.26 GPa
@Temperature 50.0 °C		183 ksi
@Temperature 122 °F		DAM; ISO 6721
 1.35 GPa
@Temperature 40.0 °C		196 ksi
@Temperature 104 °F		DAM; ISO 6721
 1.41 GPa
@Temperature 30.0 °C		205 ksi
@Temperature 86.0 °F		DAM; ISO 6721
 1.46 GPa
@Temperature 20.0 °C		212 ksi
@Temperature 68.0 °F		DAM; ISO 6721
 1.49 GPa
@Temperature 10.0 °C		216 ksi
@Temperature 50.0 °F		DAM; ISO 6721
 1.51 GPa
@Temperature 0.000 °C		219 ksi
@Temperature 32.0 °F		DAM; ISO 6721
 1.53 GPa
@Temperature -10.0 °C		222 ksi
@Temperature 14.0 °F		DAM; ISO 6721
 1.55 GPa
@Temperature -20.0 °C		225 ksi
@Temperature -4.00 °F		DAM; ISO 6721
 1.59 GPa
@Temperature -30.0 °C		231 ksi
@Temperature -22.0 °F		DAM; ISO 6721
 1.69 GPa
@Temperature -40.0 °C		245 ksi
@Temperature -40.0 °F		DAM; ISO 6721
 1.85 GPa
@Temperature -50.0 °C		268 ksi
@Temperature -58.0 °F		DAM; ISO 6721
Izod Impact, Notched  2.19 J/cm
@Temperature 23.0 °C		4.10 ft-lb/in
@Temperature 73.4 °F		DAM; ASTM D256
 2.35 J/cm
@Temperature 23.0 °C		4.40 ft-lb/in
@Temperature 73.4 °F		50%RH; ASTM D256
Izod Impact, Unnotched 13.35 J/cm
@Temperature 23.0 °C		25.01 ft-lb/in
@Temperature 73.4 °F		DAM; ASTM D4812
Izod Impact, Notched (ISO)  15.0 kJ/m²
@Temperature -40.0 °C		7.14 ft-lb/in²
@Temperature -40.0 °F		DAM; ISO 180/1A
 15.0 kJ/m²
@Temperature -40.0 °C		7.14 ft-lb/in²
@Temperature -40.0 °F		50%RH; ISO 180/1A
 16.0 kJ/m²
@Temperature -30.0 °C		7.61 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1A
 17.0 kJ/m²
@Temperature -30.0 °C		8.09 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1A
 21.0 kJ/m²
@Temperature 23.0 °C		9.99 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 26.0 kJ/m²
@Temperature 23.0 °C		12.4 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  75.0 kJ/m²
@Temperature -30.0 °C		35.7 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1U
 80.0 kJ/m²
@Temperature 23.0 °C		38.1 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1U
 80.0 kJ/m²
@Temperature 23.0 °C		38.1 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1U
 80.0 kJ/m²
@Temperature -30.0 °C		38.1 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1U
Charpy Impact Unnotched  9.70 J/cm²
@Temperature 23.0 °C		46.2 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 9.80 J/cm²
@Temperature 23.0 °C		46.6 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eU
 10.0 J/cm²
@Temperature -30.0 °C		47.6 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eU
 10.6 J/cm²
@Temperature -30.0 °C		50.4 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eU
Charpy Impact, Notched  1.40 J/cm²
@Temperature -40.0 °C		6.66 ft-lb/in²
@Temperature -40.0 °F		DAM; ISO 179/1eA
 1.70 J/cm²
@Temperature -30.0 °C		8.09 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 1.80 J/cm²
@Temperature -40.0 °C		8.57 ft-lb/in²
@Temperature -40.0 °F		50%RH; ISO 179/1eA
 1.80 J/cm²
@Temperature -30.0 °C		8.57 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 2.00 J/cm²
@Temperature 23.0 °C		9.52 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 2.80 J/cm²
@Temperature 23.0 °C		13.3 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour 5300 MPa
@Temperature 23.0 °C		769000 psi
@Temperature 73.4 °F		50%RH; ISO 899
Tensile Creep Modulus, 1000 hours 4300 MPa
@Temperature 23.0 °C		624000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+11 ohm-cm
@Temperature 23.0 °C		1.00e+11 ohm-cm
@Temperature 73.4 °F		50%RH; IEC 60093
 >= 1.00e+15 ohm-cm
@Temperature 23.0 °C		>= 1.00e+15 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
Surface Resistance  1.00e+12 ohm
@Temperature 23.0 °C		1.00e+12 ohm
@Temperature 73.4 °F		50%RH; IEC 60093
 1.00e+12 ohm
@Temperature 23.0 °C		1.00e+12 ohm
@Temperature 73.4 °F		DAM; IEC 60093
Dielectric Constant  3.6
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.6
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 4.3
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.3
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Dissipation Factor  0.013
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.013
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.060
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.060
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Comparative Tracking Index  400 V
@Thickness 3.00 mm,
Temperature 23.0 °C		400 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 400 - 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		400 - 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature -40.0 - 23.0 °C		278 µin/in-°F
@Temperature -40.0 - 73.4 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature 55.0 - 160 °C		278 µin/in-°F
@Temperature 131 - 320 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature -40.0 - 23.0 °C		278 µin/in-°F
@Temperature -40.0 - 73.4 °F		DAM; ISO 11359-1/-2
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
 500 µm/m-°C
@Temperature 55.0 - 160 °C		278 µin/in-°F
@Temperature 131 - 320 °F		DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  96.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		53.3 µin/in-°F
@Temperature -40.0 - 73.4 °F		DAM; ASTM E 831
 96.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		53.3 µin/in-°F
@Temperature -40.0 - 73.4 °F		DAM; ISO 11359-1/-2
 119 µm/m-°C
@Temperature 23.0 - 55.0 °C		66.1 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 119 µm/m-°C
@Temperature 23.0 - 55.0 °C		66.1 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
 130 µm/m-°C
@Temperature 55.0 - 160 °C		72.2 µin/in-°F
@Temperature 131 - 320 °F		DAM; ASTM E 831
 130 µm/m-°C
@Temperature 55.0 - 160 °C		72.2 µin/in-°F
@Temperature 131 - 320 °F		DAM; ISO 11359-1/-2
Melting Point 263 °C505 °FDAM; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 261 °C502 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 246 °C475 °FDAM; ISO 75-1/-2
 250 °C482 °FDAM; ASTM D648
Glass Transition Temp, Tg 75.0 °C167 °F10°C/min; DAM; ISO 11357-1/-2
UL RTI, Electrical  130 °C
@Thickness 3.00 mm		266 °F
@Thickness 0.118 in		DAM; UL 746B
 130 °C
@Thickness 0.750 mm		266 °F
@Thickness 0.0295 in		DAM; UL 746B
 130 °C
@Thickness 1.50 mm		266 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical with Impact  65.0 °C
@Thickness 0.750 mm		149 °F
@Thickness 0.0295 in		DAM; UL 746B
 105 °C
@Thickness 3.00 mm		221 °F
@Thickness 0.118 in		DAM; UL 746B
 105 °C
@Thickness 1.50 mm		221 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical without Impact  85.0 °C
@Thickness 0.750 mm		185 °F
@Thickness 0.0295 in		DAM; UL 746B
 95.0 °C
@Thickness 1.50 mm		203 °F
@Thickness 0.0591 in		DAM; UL 746B
 105 °C
@Thickness 3.00 mm		221 °F
@Thickness 0.118 in		DAM; UL 746B
Flammability, UL94  HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; IEC 60695-11-10
 HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; UL94
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; UL94
 HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; UL94
 
Processing PropertiesMetricEnglishComments
Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
 285 - 305 °C545 - 581 °FDAM
 295 °C563 °FDAM; Optimum
Mold Temperature 50.0 - 100 °C122 - 212 °FDAM
 80.0 °C176 °FDAM; optimum
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveHeat StabilizerDAM
 Impact ModifierDAM
AppearanceNatural ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesHeat StabilizedDAM
 Impact Resistance, HighDAM
 Toughness, GoodDAM
FillerGlass fiber reinforcementDAM
FormsPelletsDAM
GenericNylon 66DAM
Heat StabilizedYesDAM
Material StatusCurrentDAM
Part Marking Code>PA66-IGF33<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryGlass Reinforced ResinsDAM
 Toughened ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66-IGF33ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
Ultrasonic WeldableYesDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 FastenersDAM
 Industrial ApplicationsDAM
 Sporting GoodsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45491.html

免责声明: 本文 DuPont Performance Polymers Zytel® 80G33HS1L NC010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4