塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA6
  4. Overview of materials for Nylon 6, 30% Glass Fiber Filled

Overview of materials for Nylon 6, 30% Glass Fiber Filled

Overview of materials for Nylon 6, 30% Glass Fiber Filled 物性表: Overview of materials for Nylon 6, 30% Glass Fiber Filled物性表及特性介绍,Overview of materials for Nylon 6, 30% Glass Fiber Filled注塑参数详情,如需Overview of materials for Nylon 6, 30% Glass Fiber Filled下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 1.0
  • 密度 [g/cm3]: 1.14
  • 吸水率 [%]: 0.13
  • 缺口冲击强度: 0.4
  • 拉伸强度 [MPa]: 50.0
  • 断裂伸长率 [%]: 65.0
  • 弯曲强度 [MPa]: 31.8
  • 弯曲模量 [MPa]: 0.0216
  • 硬度: 90.0
  • 热变形温度 [℃]: 125.0
 
Physical PropertiesMetricEnglishComments
Density 1.14 - 1.67 g/cc0.0410 - 0.0603 lb/in³Average value: 1.37 g/cc Grade Count:577
Filler Content 13.0 - 35.0 %13.0 - 35.0 %Average value: 30.1 % Grade Count:92
Water Absorption 0.130 - 9.00 %0.130 - 9.00 %Average value: 3.08 % Grade Count:325
Moisture Absorption at Equilibrium 0.170 - 7.10 %0.170 - 7.10 %Average value: 1.84 % Grade Count:219
Water Absorption at Saturation 5.00 - 8.20 %5.00 - 8.20 %Average value: 6.65 % Grade Count:41
 0.500 - 2.15 %
@Temperature 30.0 - 405 °C		0.500 - 2.15 %
@Temperature 86.0 - 761 °F		Average value: 1.70 % Grade Count:1
Viscosity 2.60 - 50.0 cP2.60 - 50.0 cPAverage value: 9.37 cP Grade Count:7
 30.0 - 500 cP
@Temperature 230 - 270 °C		30.0 - 500 cP
@Temperature 446 - 518 °F		Average value: 188 cP Grade Count:2
 30.0 - 500 cP
@Shear Rate 100 - 10000 1/s		30.0 - 500 cP
@Shear Rate 100 - 10000 1/s		Average value: 188 cP Grade Count:2
Viscosity Measurement 0.400 - 1600.400 - 160Average value: 92.7 Grade Count:57
Viscosity Test 104 - 195 cm³/g104 - 195 cm³/gAverage value: 143 cm³/g Grade Count:30
Maximum Moisture Content 0.1000.100Average value: 0.100 Grade Count:42
Linear Mold Shrinkage 0.000300 - 0.0350 cm/cm0.000300 - 0.0350 in/inAverage value: 0.00430 cm/cm Grade Count:421
 0.00280 - 0.00400 cm/cm
@Temperature 80.0 - 80.0 °C		0.00280 - 0.00400 in/in
@Temperature 176 - 176 °F		Average value: 0.00304 cm/cm Grade Count:20
Linear Mold Shrinkage, 6.35 mm section 0.00400 - 0.00600 cm/cm0.00400 - 0.00600 in/inAverage value: 0.00489 cm/cm Grade Count:9
Linear Mold Shrinkage, Transverse 0.000900 - 0.0170 cm/cm0.000900 - 0.0170 in/inAverage value: 0.00831 cm/cm Grade Count:141
 0.00600 - 0.00800 cm/cm
@Temperature 80.0 - 80.0 °C		0.00600 - 0.00800 in/in
@Temperature 176 - 176 °F		Average value: 0.00695 cm/cm Grade Count:20
Melt Flow 1.00 - 101 g/10 min1.00 - 101 g/10 minAverage value: 31.5 g/10 min Grade Count:83
Spiral Flow 655 - 715 cm258 - 281 inAverage value: 693 cm Grade Count:4
Ash 30.0 - 33.1 %30.0 - 33.1 %Average value: 31.2 % Grade Count:5
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell L 111 - 115111 - 115Average value: 114 Grade Count:5
Hardness, Rockwell M 94.0 - 10094.0 - 100Average value: 97.3 Grade Count:8
Hardness, Rockwell R 90.0 - 12290.0 - 122Average value: 119 Grade Count:123
Hardness, Shore D 67.0 - 94.067.0 - 94.0Average value: 85.1 Grade Count:30
Ball Indentation Hardness 70.0 - 230 MPa10200 - 33400 psiAverage value: 153 MPa Grade Count:34
Tensile Strength, Ultimate 31.8 - 203 MPa4610 - 29500 psiAverage value: 140 MPa Grade Count:394
 43.0 - 283 MPa
@Temperature -40.0 - 121 °C		6240 - 41000 psi
@Temperature -40.0 - 250 °F		Average value: 102 MPa Grade Count:15
 50.0 - 92.5 MPa
@Temperature 130 - 175 °C		7250 - 13400 psi
@Temperature 266 - 347 °F		Average value: 102 MPa Grade Count:4
 50.0 - 92.5 MPa
@Time 1.80e+7 - 7.20e+7 sec		7250 - 13400 psi
@Time 5000 - 20000 hour		Average value: 102 MPa Grade Count:4
 21.8 - 207 MPa
@Strain 0.210 - 3.50 %		3160 - 30000 psi
@Strain 0.210 - 3.50 %		Average value: 102 MPa Grade Count:2
 21.8 - 207 MPa
@Temperature -20.0 - 150 °C		3160 - 30000 psi
@Temperature -4.00 - 302 °F		Average value: 102 MPa Grade Count:2
Tensile Strength, Yield 50.0 - 193 MPa7250 - 28000 psiAverage value: 149 MPa Grade Count:185
 111 - 214 MPa
@Temperature -40.0 - 80.0 °C		16100 - 31000 psi
@Temperature -40.0 - 176 °F		Average value: 176 MPa Grade Count:2
Elongation at Break 1.00 - 142 %1.00 - 142 %Average value: 4.40 % Grade Count:479
 2.50 - 7.00 %
@Temperature -40.0 - 121 °C		2.50 - 7.00 %
@Temperature -40.0 - 250 °F		Average value: 5.28 % Grade Count:5
Elongation at Yield 2.00 - 10.0 %2.00 - 10.0 %Average value: 4.02 % Grade Count:89
Modulus of Elasticity 0.700 - 15.0 GPa102 - 2180 ksiAverage value: 7.93 GPa Grade Count:330
 2.66 - 11.6 GPa
@Temperature -40.0 - 121 °C		386 - 1680 ksi
@Temperature -40.0 - 250 °F		Average value: 6.31 GPa Grade Count:8
Flexural Yield Strength 65.0 - 301 MPa9430 - 43600 psiAverage value: 216 MPa Grade Count:407
 89.0 - 380 MPa
@Temperature -40.0 - 121 °C		12900 - 55100 psi
@Temperature -40.0 - 250 °F		Average value: 186 MPa Grade Count:9
Flexural Modulus 0.0216 - 14.3 GPa3.13 - 2070 ksiAverage value: 7.17 GPa Grade Count:443
 2.80 - 12.5 GPa
@Temperature -40.0 - 121 °C		406 - 1810 ksi
@Temperature -40.0 - 250 °F		Average value: 4.92 GPa Grade Count:13
Compressive Yield Strength 140 - 222 MPa20300 - 32200 psiAverage value: 166 MPa Grade Count:10
Poissons Ratio 0.3500.350Average value: 0.350 Grade Count:8
Shear Modulus 1.66 - 4.10 GPa240 - 595 ksiAverage value: 3.10 GPa Grade Count:6
 0.000 - 2.081 GPa
@Temperature -50.0 - 228 °C		0.000 - 301.8 ksi
@Temperature -58.0 - 442 °F		Average value: 0.874 GPa Grade Count:2
Izod Impact, Notched 0.400 - 3.36 J/cm0.749 - 6.30 ft-lb/inAverage value: 1.27 J/cm Grade Count:255
 0.400 - 3.84408 J/cm
@Temperature -40.0 - 121 °C		0.749 - 7.20154 ft-lb/in
@Temperature -40.0 - 250 °F		Average value: 1.10 J/cm Grade Count:11
 1.01441 - 1.33475 J/cm
@Temperature -40.0 - -40.0 °C		1.90041 - 2.50053 ft-lb/in
@Temperature -40.0 - -40.0 °F		Average value: 1.10 J/cm Grade Count:7
 1.01441 - 1.33475 J/cm
@Thickness 3.17 - 3.17 mm		1.90041 - 2.50053 ft-lb/in
@Thickness 0.125 - 0.125 in		Average value: 1.10 J/cm Grade Count:7
Izod Impact, Unnotched 3.20 - 5340 J/cm6.00 - 10000 ft-lb/inAverage value: 10.4 J/cm Grade Count:51
Izod Impact, Notched (ISO) 1.50 - 182 kJ/m²0.714 - 86.6 ft-lb/in²Average value: 18.9 kJ/m² Grade Count:141
 3.00 - 18.0 kJ/m²
@Temperature -40.0 - -20.0 °C		1.43 - 8.57 ft-lb/in²
@Temperature -40.0 - -4.00 °F		Average value: 11.0 kJ/m² Grade Count:41
Izod Impact, Unnotched (ISO) 12.0 kJ/m² - NB5.71 ft-lb/in² - NBAverage value: 68.1 kJ/m² Grade Count:36
 40.0 kJ/m² - NB
@Temperature -30.0 - -30.0 °C		19.0 ft-lb/in² - NB
@Temperature -22.0 - -22.0 °F		Average value: 69.1 kJ/m² Grade Count:23
Charpy Impact Unnotched 2.30 J/cm² - NB10.9 ft-lb/in² - NBAverage value: 7.76 J/cm² Grade Count:255
 2.00 J/cm² - NB
@Temperature -40.0 - 30.0 °C		9.52 ft-lb/in² - NB
@Temperature -40.0 - 86.0 °F		Average value: 6.10 J/cm² Grade Count:150
Charpy Impact, Notched 0.200 - 1000 J/cm²0.952 - 4760 ft-lb/in²Average value: 1.55 J/cm² Grade Count:264
 0.150 - 19.0 J/cm²
@Temperature -40.0 - 30.0 °C		0.714 - 90.4 ft-lb/in²
@Temperature -40.0 - 86.0 °F		Average value: 1.20 J/cm² Grade Count:156
Puncture Energy 2.00 - 14.0 J1.48 - 10.3 ft-lbAverage value: 5.86 J Grade Count:19
 1.70 - 6.00 J
@Temperature -30.0 - -30.0 °C		1.25 - 4.43 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 3.13 J Grade Count:17
 2.00 - 2.00 J
@Temperature -30.0 - -30.0 °C		1.48 - 1.48 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 3.13 J Grade Count:1
 2.00 - 2.00 J
@Load <=75.5 kg		1.48 - 1.48 ft-lb
@Load <=166 lb		Average value: 3.13 J Grade Count:1
Tensile Creep Modulus, 1 hour 0.000 - 92000 MPa0.000 - 1.33e+7 psiAverage value: 4840 MPa Grade Count:19
 0.000 - 60.0 MPa
@Temperature 60.0 - 90.0 °C		0.000 - 8700 psi
@Temperature 140 - 194 °F		Average value: 24.0 MPa Grade Count:1
 0.000 - 60.0 MPa
@Strain 0.000 - 1.88 %		0.000 - 8700 psi
@Strain 0.000 - 1.88 %		Average value: 24.0 MPa Grade Count:1
Tensile Creep Modulus, 1000 hours 0.000 - 6500 MPa0.000 - 943000 psiAverage value: 1560 MPa Grade Count:21
 0.000 - 60.0 MPa
@Temperature 60.0 - 90.0 °C		0.000 - 8700 psi
@Temperature 140 - 194 °F		Average value: 24.0 MPa Grade Count:1
 0.000 - 60.0 MPa
@Strain 0.000 - 2.55 %		0.000 - 8700 psi
@Strain 0.000 - 2.55 %		Average value: 24.0 MPa Grade Count:1
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 2500 - 1.00e+17 ohm-cm2500 - 1.00e+17 ohm-cmAverage value: 9.17e+14 ohm-cm Grade Count:264
Surface Resistance 10000 - 1.00e+16 ohm10000 - 1.00e+16 ohmAverage value: 3.62e+14 ohm Grade Count:139
Dielectric Constant 2.60 - 38.02.60 - 38.0Average value: 5.60 Grade Count:132
Dielectric Strength 11.0 - 80.0 kV/mm280 - 2030 kV/inAverage value: 29.8 kV/mm Grade Count:196
Dissipation Factor 0.00500 - 0.8500.00500 - 0.850Average value: 0.0798 Grade Count:114
Dielectric Loss Index 0.0220 - 0.2400.0220 - 0.240Average value: 0.125 Grade Count:10
Arc Resistance 15.0 - 180 sec15.0 - 180 secAverage value: 112 sec Grade Count:19
Comparative Tracking Index 225 - 600 V225 - 600 VAverage value: 513 V Grade Count:182
High Voltage Arc-Tracking Rate, HVTR 25.4 - 150 mm/min1.00 - 5.91 in/minAverage value: 63.5 mm/min Grade Count:3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 0.150 - 500 µm/m-°C0.0833 - 278 µin/in-°FAverage value: 53.6 µm/m-°C Grade Count:190
 500 - 500 µm/m-°C
@Temperature 55.0 - 160 °C		278 - 278 µin/in-°F
@Temperature 131 - 320 °F		Average value: 500 µm/m-°C Grade Count:3
CTE, linear, Transverse to Flow 0.250 - 150 µm/m-°C0.139 - 83.3 µin/in-°FAverage value: 75.1 µm/m-°C Grade Count:88
 110 - 125 µm/m-°C
@Temperature 55.0 - 160 °C		61.1 - 69.4 µin/in-°F
@Temperature 131 - 320 °F		Average value: 118 µm/m-°C Grade Count:3
Specific Heat Capacity 0.350 - 2.43 J/g-°C0.0837 - 0.582 BTU/lb-°FAverage value: 1.57 J/g-°C Grade Count:22
Thermal Conductivity 0.200 - 1.64 W/m-K1.39 - 11.4 BTU-in/hr-ft²-°FAverage value: 0.361 W/m-K Grade Count:38
Melting Point 208 - 295 °C406 - 563 °FAverage value: 221 °C Grade Count:351
Maximum Service Temperature, Air 65.0 - 270 °C149 - 518 °FAverage value: 154 °C Grade Count:76
Deflection Temperature at 0.46 MPa (66 psi) 125 - 240 °C257 - 464 °FAverage value: 215 °C Grade Count:296
Deflection Temperature at 1.8 MPa (264 psi) 54.0 - 270 °C129 - 518 °FAverage value: 204 °C Grade Count:488
Deflection Temperature at 8.0 MPa 60.0 - 187 °C140 - 369 °FAverage value: 111 °C Grade Count:31
Vicat Softening Point 183 - 250 °C361 - 482 °FAverage value: 206 °C Grade Count:110
Decomposition Temperature 300 - 350 °C572 - 662 °FAverage value: 321 °C Grade Count:20
UL RTI, Electrical 65.0 - 140 °C149 - 284 °FAverage value: 104 °C Grade Count:32
UL RTI, Mechanical with Impact 65.0 - 125 °C149 - 257 °FAverage value: 95.7 °C Grade Count:32
UL RTI, Mechanical without Impact 65.0 - 150 °C149 - 302 °FAverage value: 104 °C Grade Count:31
Flammability, UL94 HB - 5VAHB - 5VAGrade Count:343
Flammability Test 1.00 - 1651.00 - 165Average value: 46.8 Grade Count:4
Oxygen Index 3.20 - 35.0 %3.20 - 35.0 %Average value: 24.2 % Grade Count:35
Glow Wire Test 550 - 960 °C1020 - 1760 °FAverage value: 782 °C Grade Count:76
Shrinkage 0.0400 - 0.160 %0.0400 - 0.160 %Average value: 0.0887 % Grade Count:4
 0.0700 - 0.150 %
@Temperature 120 - 120 °C		0.0700 - 0.150 %
@Temperature 248 - 248 °F		Average value: 0.105 % Grade Count:2
 0.0700 - 0.150 %
@Time 14400 - 14400 sec		0.0700 - 0.150 %
@Time 4.00 - 4.00 hour		Average value: 0.105 % Grade Count:2
 
Processing PropertiesMetricEnglishComments
Processing Temperature 70.0 - 300 °C158 - 572 °FAverage value: 206 °C Grade Count:52
Feed Temperature 20.0 - 260 °C68.0 - 500 °FAverage value: 160 °C Grade Count:30
Nozzle Temperature 210 - 293 °C410 - 560 °FAverage value: 259 °C Grade Count:29
Melt Temperature 80.0 - 330 °C176 - 626 °FAverage value: 255 °C Grade Count:256
Mold Temperature 21.1 - 121 °C70.0 - 250 °FAverage value: 84.1 °C Grade Count:235
Drying Temperature 70.0 - 130 °C158 - 266 °FAverage value: 82.6 °C Grade Count:204
Dry Time 2.00 - 12.0 hour2.00 - 12.0 hourAverage value: 3.89 hour Grade Count:157
 2.00 - 6.00 hour
@Temperature 79.4 - 80.0 °C		2.00 - 6.00 hour
@Temperature 175 - 176 °F		Average value: 3.50 hour Grade Count:10
Moisture Content 0.00300 - 1.90 %0.00300 - 1.90 %Average value: 0.177 % Grade Count:127
Dew Point -30.0 - -17.8 °C-22.0 - 0.000 °FAverage value: -19.1 °C Grade Count:9
Injection Pressure 4.96 - 172 MPa720 - 25000 psiAverage value: 77.7 MPa Grade Count:68
Hold Pressure 50.0 - 100 MPa7250 - 14500 psiAverage value: 75.0 MPa Grade Count:10
Back Pressure 0.000 - 1.72 MPa0.000 - 250 psiAverage value: 0.564 MPa Grade Count:19
Fill Speed 200 - 600 mm/sec7.87 - 23.6 in/secAverage value: 400 mm/sec Grade Count:3
Shot Size 30.0 - 80.0 %30.0 - 80.0 %Average value: 53.6 % Grade Count:7
Screw Speed 20.0 - 200 rpm20.0 - 200 rpmAverage value: 69.2 rpm Grade Count:16

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45769.html

免责声明: 本文 Overview of materials for Nylon 6, 30% Glass Fiber Filled 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4