- 熔体流动速率 [g/10min]: 3.0
- 密度 [g/cm3]: 1.04
- 吸水率 [%]: 1.6
- 缺口冲击强度: 0.45
- 拉伸强度 [MPa]: 28.0
- 断裂伸长率 [%]: 28.0
- 弯曲强度 [MPa]: 48.0
- 弯曲模量 [MPa]: 0.690
- 热变形温度 [℃]: 51.0
- 透光率 [%]: 88.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 - 1.38 g/cc | 0.0376 - 0.0500 lb/in³ | Average value: 1.14 g/cc Grade Count:52 |
| Water Absorption | 1.60 - 10.0 % | 1.60 - 10.0 % | Average value: 6.35 % Grade Count:15 |
| Moisture Absorption at Equilibrium | 2.70 - 3.00 % | 2.70 - 3.00 % | Average value: 2.94 % Grade Count:10 |
| Water Vapor Transmission | 2.60 - 465 g/m²/day | 0.167 - 29.9 g/100 in²/day | Average value: 192 g/m²/day Grade Count:13 |
| Oxygen Transmission Rate | 0.230 - 192 cc/m²/day | 0.0148 - 12.4 cc/100 in²/day | Average value: 27.2 cc/m²/day Grade Count:20 |
| Viscosity | 3.15 - 85.0 cP | 3.15 - 85.0 cP | Average value: 10.3 cP Grade Count:5 |
| Viscosity Measurement | 200 - 245 | 200 - 245 | Average value: 227 Grade Count:5 |
| Viscosity Test | 155 - 225 cm³/g | 155 - 225 cm³/g | Average value: 208 cm³/g Grade Count:4 |
| Thickness | 10.2 - 59.0 microns | 0.400 - 2.32 mil | Average value: 26.7 microns Grade Count:29 |
| Linear Mold Shrinkage | 0.0140 cm/cm | 0.0140 in/in | Average value: 0.0140 cm/cm Grade Count:5 |
| Linear Mold Shrinkage, Transverse | 0.0140 cm/cm | 0.0140 in/in | Average value: 0.0140 cm/cm Grade Count:4 |
| Melt Flow | 3.00 - 50.0 g/10 min | 3.00 - 50.0 g/10 min | Average value: 17.4 g/10 min Grade Count:12 |
| Surface Tension | 36.0 - 56.0 dynes/cm | 36.0 - 56.0 dynes/cm | Average value: 52.9 dynes/cm Grade Count:17 |
| Mechanical Properties | Metric | English | Comments |
| Ball Indentation Hardness | 60.0 - 140 MPa | 8700 - 20300 psi | Average value: 100 MPa Grade Count:4 |
| Tensile Strength, Ultimate | 48.0 - 112 MPa | 6960 - 16200 psi | Average value: 86.3 MPa Grade Count:6 |
| Film Tensile Strength at Yield, MD | 37.9 - 51.0 MPa | 5500 - 7400 psi | Average value: 40.2 MPa Grade Count:6 |
| Film Tensile Strength at Yield, TD | 37.2 - 82.7 MPa | 5400 - 12000 psi | Average value: 65.6 MPa Grade Count:10 |
| Tensile Strength, Yield | 28.0 - 80.0 MPa | 4060 - 11600 psi | Average value: 60.1 MPa Grade Count:26 |
| Film Elongation at Break, MD | 50.0 - 460 % | 50.0 - 460 % | Average value: 182 % Grade Count:29 |
| Film Elongation at Break, TD | 55.0 - 480 % | 55.0 - 480 % | Average value: 294 % Grade Count:21 |
| Elongation at Break | 3.50 - 400 % | 3.50 - 400 % | Average value: 120 % Grade Count:27 |
| Elongation at Yield | 4.00 - 25.0 % | 4.00 - 25.0 % | Average value: 13.3 % Grade Count:10 |
| Modulus of Elasticity | 0.100 - 3.30 GPa | 14.5 - 479 ksi | Average value: 2.00 GPa Grade Count:19 |
| Flexural Yield Strength | 28.0 - 120 MPa | 4060 - 17400 psi | Average value: 74.9 MPa Grade Count:14 |
| Flexural Modulus | 0.690 - 2.80 GPa | 100 - 406 ksi | Average value: 2.22 GPa Grade Count:10 |
| Secant Modulus | 0.650 GPa | 94.3 ksi | Average value: 0.650 GPa Grade Count:6 |
| Secant Modulus, MD | 0.285 - 4.69 GPa | 41.3 - 680 ksi | Average value: 2.17 GPa Grade Count:22 |
| Secant Modulus, TD | 0.285 - 3.70 GPa | 41.3 - 537 ksi | Average value: 2.17 GPa Grade Count:20 |
| Izod Impact, Notched | 0.450 - 10.7 J/cm | 0.843 - 20.0 ft-lb/in | Average value: 3.69 J/cm Grade Count:4 |
| Charpy Impact Unnotched | 1000 J/cm² | 4760 ft-lb/in² | Grade Count:12 |
| 5.50 - 999.9 J/cm² @Temperature -30.0 - -30.0 °C | 26.2 - 4759 ft-lb/in² @Temperature -22.0 - -22.0 °F | Average value: 5.50 J/cm² Grade Count:8 | |
| Charpy Impact, Notched | 0.500 - 5.00 J/cm² | 2.38 - 23.8 ft-lb/in² | Average value: 2.02 J/cm² Grade Count:14 |
| 0.500 - 0.500 J/cm² @Temperature -30.0 - -30.0 °C | 2.38 - 2.38 ft-lb/in² @Temperature -22.0 - -22.0 °F | Average value: 0.500 J/cm² Grade Count:8 | |
| Coefficient of Friction | 0.150 - 2.00 | 0.150 - 2.00 | Average value: 0.538 Grade Count:23 |
| Coefficient of Friction, Static | 0.370 - 1.00 | 0.370 - 1.00 | Average value: 0.595 Grade Count:4 |
| Tear Strength Test | 30.0 - 14000 | 30.0 - 14000 | Average value: 1250 Grade Count:22 |
| Elmendorf Tear Strength MD | 56.0 g | 56.0 g | Average value: 56.0 g Grade Count:6 |
| Elmendorf Tear Strength, MD | 0.394 - 4.21 g/micron | 10.0 - 107 g/mil | Average value: 1.86 g/micron Grade Count:4 |
| Elmendorf Tear Strength, TD | 1.57 - 7.87 g/micron | 40.0 - 200 g/mil | Average value: 4.74 g/micron Grade Count:4 |
| Film Tensile Strength at Break, MD | 32.0 - 379 MPa | 4640 - 55000 psi | Average value: 204 MPa Grade Count:29 |
| Film Tensile Strength at Break, TD | 29.0 - 303 MPa | 4210 - 44000 psi | Average value: 128 MPa Grade Count:21 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+12 - 1.00e+15 ohm-cm | 1.00e+12 - 1.00e+15 ohm-cm | Average value: 2.00e+14 ohm-cm Grade Count:12 |
| Surface Resistance | 1.00e+13 - 1.00e+15 ohm | 1.00e+13 - 1.00e+15 ohm | Average value: 2.57e+14 ohm Grade Count:12 |
| Dielectric Constant | 3.50 - 18.0 | 3.50 - 18.0 | Average value: 7.35 Grade Count:8 |
| Dielectric Strength | 30.0 - 35.0 kV/mm | 762 - 889 kV/in | Average value: 32.0 kV/mm Grade Count:12 |
| Comparative Tracking Index | 600 V | 600 V | Average value: 600 V Grade Count:12 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 80.0 µm/m-°C | 44.4 µin/in-°F | Average value: 80.0 µm/m-°C Grade Count:8 |
| CTE, linear, Transverse to Flow | 80.0 µm/m-°C | 44.4 µin/in-°F | Average value: 80.0 µm/m-°C Grade Count:8 |
| Melting Point | 193 - 260 °C | 379 - 500 °F | Average value: 220 °C Grade Count:30 |
| Deflection Temperature at 0.46 MPa (66 psi) | 51.0 - 161 °C | 124 - 322 °F | Average value: 136 °C Grade Count:12 |
| Deflection Temperature at 1.8 MPa (264 psi) | 50.0 - 75.0 °C | 122 - 167 °F | Average value: 54.9 °C Grade Count:17 |
| Deflection Temperature at 8.0 MPa | 40.0 °C | 104 °F | Average value: 40.0 °C Grade Count:8 |
| Vicat Softening Point | 70.0 - 195 °C | 158 - 383 °F | Average value: 153 °C Grade Count:6 |
| Flammability, UL94 | HB - V-2 | HB - V-2 | Grade Count:14 |
| Oxygen Index | 24.0 % | 24.0 % | Average value: 24.0 % Grade Count:8 |
| Glow Wire Test | 750 °C | 1380 °F | Average value: 750 °C Grade Count:4 |
| Shrinkage | 0.200 - 15.0 % | 0.200 - 15.0 % | Average value: 4.15 % Grade Count:23 |
| Optical Properties | Metric | English | Comments |
| Haze | 1.70 - 10.0 % | 1.70 - 10.0 % | Average value: 5.00 % Grade Count:21 |
| Gloss | 80.0 - 180 % | 80.0 - 180 % | Average value: 139 % Grade Count:9 |
| Transmission, Visible | 88.0 - 90.0 % | 88.0 - 90.0 % | Average value: 89.8 % Grade Count:8 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 200 - 295 °C | 392 - 563 °F | Average value: 245 °C Grade Count:8 |
| Melt Temperature | 230 - 290 °C | 446 - 554 °F | Average value: 260 °C Grade Count:4 |
| Mold Temperature | 60.0 - 120 °C | 140 - 248 °F | Average value: 90.0 °C Grade Count:4 |
| Drying Temperature | 75.0 - 100 °C | 167 - 212 °F | Average value: 87.5 °C Grade Count:4 |
| Moisture Content | 0.0600 - 0.100 % | 0.0600 - 0.100 % | Average value: 0.0778 % Grade Count:9 |
| Injection Pressure | 80.0 - 130 MPa | 11600 - 18900 psi | Average value: 105 MPa Grade Count:4 |