- 密度 [g/cm3]: 1.12
- 吸水率 [%]: 0.14
- 缺口冲击强度: 0.427
- 断裂伸长率 [%]: 62.1
- 弯曲强度 [MPa]: 44.8
- 弯曲模量 [MPa]: 1.72
- 硬度: 109.0
- 热变形温度 [℃]: 121.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.12 - 1.37 g/cc | 0.0405 - 0.0495 lb/in³ | Average value: 1.19 g/cc Grade Count:15 |
Water Absorption | 0.140 - 0.500 % | 0.140 - 0.500 % | Average value: 0.274 % Grade Count:7 |
Linear Mold Shrinkage | 0.00200 - 0.0400 cm/cm | 0.00200 - 0.0400 in/in | Average value: 0.0180 cm/cm Grade Count:15 |
Linear Mold Shrinkage, 6.35 mm section | 0.00400 - 0.0300 cm/cm | 0.00400 - 0.0300 in/in | Average value: 0.0180 cm/cm Grade Count:4 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 109 - 121 | 109 - 121 | Average value: 116 Grade Count:5 |
Tensile Strength, Ultimate | 44.8 - 131 MPa | 6500 - 19000 psi | Average value: 55.4 MPa Grade Count:15 |
Elongation at Break | 2.00 - 30.0 % | 2.00 - 30.0 % | Average value: 9.07 % Grade Count:15 |
Modulus of Elasticity | 1.86 - 8.96 GPa | 270 - 1300 ksi | Average value: 2.71 GPa Grade Count:14 |
Flexural Yield Strength | 62.1 - 200 MPa | 9000 - 29000 psi | Average value: 79.9 MPa Grade Count:14 |
Flexural Modulus | 1.72 - 7.58 GPa | 250 - 1100 ksi | Average value: 2.46 GPa Grade Count:14 |
Izod Impact, Notched | 0.427 - 1.07 J/cm | 0.800 - 2.00 ft-lb/in | Average value: 0.532 J/cm Grade Count:15 |
Izod Impact, Unnotched | 3.20 - 12.8 J/cm | 6.00 - 24.0 ft-lb/in | Average value: 6.45 J/cm Grade Count:13 |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 1.00e+13 - 1.00e+15 ohm-cm | 1.00e+13 - 1.00e+15 ohm-cm | Average value: 2.26e+14 ohm-cm Grade Count:5 |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 121 - 218 °C | 250 - 425 °F | Average value: 183 °C Grade Count:6 |
Deflection Temperature at 1.8 MPa (264 psi) | 74.0 - 216 °C | 165 - 420 °F | Average value: 96.5 °C Grade Count:13 |
Flammability, UL94 | HB | HB | Grade Count:11 |
Processing Properties | Metric | English | Comments |
Processing Temperature | 252 - 279 °C | 485 - 535 °F | Average value: 266 °C Grade Count:6 |
Melt Temperature | 232 - 285 °C | 450 - 545 °F | Average value: 263 °C Grade Count:8 |
Mold Temperature | 49.0 - 107 °C | 120 - 225 °F | Average value: 77.5 °C Grade Count:14 |
Drying Temperature | 79.4 - 107 °C | 175 - 225 °F | Average value: 82.3 °C Grade Count:8 |
Dry Time | 4.00 hour | 4.00 hour | Average value: 4.00 hour Grade Count:5 |
Moisture Content | 0.200 % | 0.200 % | Average value: 0.200 % Grade Count:6 |
Dew Point | -17.8 °C | 0.000 °F | Average value: -17.8 °C Grade Count:6 |
Injection Pressure | 68.9 - 124 MPa | 10000 - 18000 psi | Average value: 96.5 MPa Grade Count:12 |