塑胶原料之家
  1. 首页
  2. 英文物性
  3. PP
  4. Overview of materials for Polypropylene Copolymer

Overview of materials for Polypropylene Copolymer

Overview of materials for Polypropylene Copolymer 物性表: Overview of materials for Polypropylene Copolymer物性表及特性介绍,Overview of materials for Polypropylene Copolymer注塑参数详情,如需Overview of materials for Polypropylene Copolymer下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.2
  • 密度 [g/cm3]: 0.123
  • 吸水率 [%]: 0.01
  • 缺口冲击强度: 0.26
  • 拉伸强度 [MPa]: 8.96
  • 断裂伸长率 [%]: 13.4
  • 弯曲强度 [MPa]: 10.0
  • 弯曲模量 [MPa]: 0.172
  • 硬度: 33.0
  • 热变形温度 [℃]: 35.0
  • 透光率 [%]: 80.0
 
Physical PropertiesMetricEnglishComments
Density 0.123 - 2.40 g/cc0.00444 - 0.0867 lb/in³Average value: 0.950 g/cc Grade Count:686
Filler Content 0.000 - 75.0 %0.000 - 75.0 %Average value: 21.1 % Grade Count:59
Water Absorption 0.0100 - 0.300 %0.0100 - 0.300 %Average value: 0.0777 % Grade Count:43
Oxidative Induction Time (OIT) 30.0 - 40.0 min
@Temperature 190 - 220 °C		30.0 - 40.0 min
@Temperature 374 - 428 °F		Average value: 48.0 min Grade Count:5
Linear Mold Shrinkage 0.00100 - 0.0350 cm/cm0.00100 - 0.0350 in/inAverage value: 0.0125 cm/cm Grade Count:196
Linear Mold Shrinkage, Transverse 0.00500 - 0.0250 cm/cm0.00500 - 0.0250 in/inAverage value: 0.0148 cm/cm Grade Count:32
Melt Flow 0.200 - 150 g/10 min0.200 - 150 g/10 minAverage value: 18.2 g/10 min Grade Count:858
Base Resin Melt Index 1.20 - 45.0 g/10 min
@Temperature 230 - 230 °C		1.20 - 45.0 g/10 min
@Temperature 446 - 446 °F		Average value: 16.8 g/10 min Grade Count:17
Antiblock Level 1500 - 1800 ppm1500 - 1800 ppmAverage value: 1740 ppm Grade Count:5
Slip Level 1000 - 2100 ppm1000 - 2100 ppmAverage value: 1860 ppm Grade Count:9
Ash 1.00 - 40.0 %1.00 - 40.0 %Average value: 15.5 % Grade Count:15
 0.300 - 0.500 %
@Temperature 600 - 900 °C		0.300 - 0.500 %
@Temperature 1110 - 1650 °F		Average value: 0.433 % Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 45.0 - 55.045.0 - 55.0Average value: 52.5 Grade Count:4
Hardness, Rockwell R 33.0 - 11533.0 - 115Average value: 85.4 Grade Count:310
Hardness, Shore D 52.0 - 85.052.0 - 85.0Average value: 66.7 Grade Count:124
Ball Indentation Hardness 35.0 - 82.0 MPa5080 - 11900 psiAverage value: 62.5 MPa Grade Count:21
Tensile Strength, Ultimate 10.0 - 128 MPa1450 - 18500 psiAverage value: 28.0 MPa Grade Count:229
 9.00 - 15.0 MPa
@Temperature 60.0 - 90.0 °C		1310 - 2180 psi
@Temperature 140 - 194 °F		Average value: 12.0 MPa Grade Count:1
Tensile Strength, Yield 8.96 - 110 MPa1300 - 16000 psiAverage value: 26.5 MPa Grade Count:664
Film Elongation at Break, MD 80.0 - 800 %80.0 - 800 %Average value: 577 % Grade Count:19
Film Elongation at Break, TD 500 - 800 %500 - 800 %Average value: 627 % Grade Count:11
Elongation at Break 1.30 - 1000 %1.30 - 1000 %Average value: 191 % Grade Count:217
Elongation at Yield 0.500 - 500 %0.500 - 500 %Average value: 16.7 % Grade Count:485
Modulus of Elasticity 0.300 - 13.0 GPa43.5 - 1890 ksiAverage value: 1.51 GPa Grade Count:203
Flexural Yield Strength 13.4 - 181 MPa1950 - 26300 psiAverage value: 47.6 MPa Grade Count:121
Flexural Modulus 0.172 - 11.0 GPa25.0 - 1600 ksiAverage value: 1.40 GPa Grade Count:768
 0.370 - 0.560 GPa
@Temperature 60.0 - 90.0 °C		53.7 - 81.2 ksi
@Temperature 140 - 194 °F		Average value: 0.465 GPa Grade Count:1
Shear Modulus 0.260 - 0.730 GPa37.7 - 106 ksiAverage value: 0.541 GPa Grade Count:20
Secant Modulus 0.345 - 1.50 GPa50.0 - 218 ksiAverage value: 0.982 GPa Grade Count:3
Izod Impact, Notched 0.260 J/cm - NB0.487 ft-lb/in - NBAverage value: 1.37 J/cm Grade Count:592
 0.160 - 99.99 J/cm
@Temperature -40.0 - 4.00 °C		0.300 - 187.3 ft-lb/in
@Temperature -40.0 - 39.2 °F		Average value: 0.805 J/cm Grade Count:77
 0.200 J/cm - NB
@Temperature -30.0 - 0.000 °C		0.375 ft-lb/in - NB
@Temperature -22.0 - 32.0 °F		Average value: 0.805 J/cm Grade Count:26
 0.200 J/cm - NB
@Thickness 3.17 - 3.17 mm		0.375 ft-lb/in - NB
@Thickness 0.125 - 0.125 in		Average value: 0.805 J/cm Grade Count:26
 0.32034 - 1.33475 J/cm
@Diameter 0.125 - 3.17 mm		0.60013 - 2.50053 ft-lb/in
@Diameter 0.00492 - 0.125 in		Average value: 0.805 J/cm Grade Count:9
 0.32034 - 1.33475 J/cm
@Temperature -20.0 - 4.00 °C		0.60013 - 2.50053 ft-lb/in
@Temperature -4.00 - 39.2 °F		Average value: 0.805 J/cm Grade Count:9
Izod Impact, Unnotched 0.294 J/cm - NB0.551 ft-lb/in - NBAverage value: 4.51 J/cm Grade Count:47
 0.343233 - 0.441299 J/cm
@Temperature -10.0 - -10.0 °C		0.643016 - 0.826734 ft-lb/in
@Temperature 14.0 - 14.0 °F		Average value: 0.392 J/cm Grade Count:3
Izod Impact, Notched (ISO) 4.00 - 21000 kJ/m²1.90 - 9990 ft-lb/in²Average value: 16.4 kJ/m² Grade Count:54
 2.00 - 13.0 kJ/m²
@Temperature -40.0 - 0.000 °C		0.952 - 6.19 ft-lb/in²
@Temperature -40.0 - 32.0 °F		Average value: 5.25 kJ/m² Grade Count:17
Charpy Impact Unnotched 0.800 J/cm² - NB3.81 ft-lb/in² - NBAverage value: 4.09 J/cm² Grade Count:80
 1.20 J/cm² - NB
@Temperature -40.0 - 0.000 °C		5.71 ft-lb/in² - NB
@Temperature -40.0 - 32.0 °F		Average value: 8.38 J/cm² Grade Count:41
Charpy Impact, Notched 0.300 - 55.0 J/cm²1.43 - 262 ft-lb/in²Average value: 1.80 J/cm² Grade Count:179
 0.100 - 12.0 J/cm²
@Temperature -40.0 - 0.000 °C		0.476 - 57.1 ft-lb/in²
@Temperature -40.0 - 32.0 °F		Average value: 0.596 J/cm² Grade Count:137
Gardner Impact 1.25 - 136 J0.920 - 100 ft-lbAverage value: 22.9 J Grade Count:69
 1.00 - 36.0 J
@Temperature -30.0 - -20.0 °C		0.738 - 26.6 ft-lb
@Temperature -22.0 - -4.00 °F		Average value: 19.8 J Grade Count:41
 4.86 - 23.6 J
@Temperature -23.0 - -20.0 °C		3.58 - 17.4 ft-lb
@Temperature -9.40 - -4.00 °F		Average value: 19.8 J Grade Count:6
 4.86 - 23.6 J
@Thickness 3.17 - 3.18 mm		3.58 - 17.4 ft-lb
@Thickness 0.125 - 0.125 in		Average value: 19.8 J Grade Count:6
Dart Drop, Total Energy 5.20 - 50.0 J3.84 - 36.9 ft-lbAverage value: 23.9 J Grade Count:37
Falling Dart Impact 2.26 - 33.0 J1.67 - 24.3 ft-lbAverage value: 9.75 J Grade Count:11
 28.2011 - 28.2011 J
@Temperature -30.0 - -30.0 °C		20.8000 - 20.8000 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 13.1 J Grade Count:1
 3.00 - 27.0 J
@Temperature -30.0 - -30.0 °C		2.21 - 19.9 ft-lb
@Temperature -22.0 - -22.0 °F		Average value: 13.1 J Grade Count:5
 3.00 - 27.0 J
@Thickness 3.17 - 3.17 mm		2.21 - 19.9 ft-lb
@Thickness 0.125 - 0.125 in		Average value: 13.1 J Grade Count:5
Puncture Energy 10.0 - 48.0 J
@Temperature -40.0 - 0.000 °C		7.38 - 35.4 ft-lb
@Temperature -40.0 - 32.0 °F		Average value: 23.6 J Grade Count:14
Coefficient of Friction 0.100 - 0.7000.100 - 0.700Average value: 0.311 Grade Count:16
Dart drop Total Energy 6.73 - 7.79 J/cm0.0126 - 0.0146 ft-lb/milAverage value: 7.08 J/cm Grade Count:3
Film Tensile Strength at Break, MD 21.0 - 440 MPa3050 - 63800 psiAverage value: 73.0 MPa Grade Count:27
Film Tensile Strength at Break, TD 25.0 - 340 MPa3630 - 49300 psiAverage value: 59.4 MPa Grade Count:25
Tangent Modulus 740 - 1590 MPa107000 - 230000 psiAverage value: 1150 MPa Grade Count:16
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 50.0 - 1.00e+17 ohm-cm50.0 - 1.00e+17 ohm-cmAverage value: 1.00e+16 ohm-cm Grade Count:38
Surface Resistance 100 - 1.00e+16 ohm100 - 1.00e+16 ohmAverage value: 8.28e+14 ohm Grade Count:40
Insulation Resistance 100 - 1.00e+14 ohm100 - 1.00e+14 ohmAverage value: 1.11e+13 ohm Grade Count:9
Dielectric Strength 11.8 - 27.0 kV/mm300 - 686 kV/inAverage value: 21.5 kV/mm Grade Count:11
Comparative Tracking Index 450 - 600 V450 - 600 VAverage value: 585 V Grade Count:31
 
Thermal PropertiesMetricEnglishComments
CTE, linear 11.7 - 150 µm/m-°C6.50 - 83.3 µin/in-°FAverage value: 85.3 µm/m-°C Grade Count:29
Thermal Conductivity 0.240 - 3.40 W/m-K1.67 - 23.6 BTU-in/hr-ft²-°FAverage value: 0.623 W/m-K Grade Count:11
Melting Point 128 - 170 °C262 - 338 °FAverage value: 154 °C Grade Count:141
Crystallization Temperature 35.0 - 130 °C95.0 - 266 °FAverage value: 101 °C Grade Count:14
Maximum Service Temperature, Air 65.0 - 130 °C149 - 266 °FAverage value: 94.5 °C Grade Count:18
Deflection Temperature at 0.46 MPa (66 psi) 35.0 - 185 °C95.0 - 365 °FAverage value: 95.0 °C Grade Count:569
Deflection Temperature at 1.8 MPa (264 psi) 41.0 - 165 °C106 - 329 °FAverage value: 64.6 °C Grade Count:241
Vicat Softening Point 50.0 - 189 °C122 - 372 °FAverage value: 120 °C Grade Count:192
Heat Distortion Temperature 75.0 - 83.0 °C167 - 181 °FAverage value: 79.3 °C Grade Count:6
UL RTI, Electrical 105 - 115 °C221 - 239 °FAverage value: 108 °C Grade Count:3
Flammability, UL94 HB - V-0HB - V-0Grade Count:112
Flash Point 340 °C644 °FAverage value: 340 °C Grade Count:10
Glow Wire Test 650 - 960 °C1200 - 1760 °FAverage value: 806 °C Grade Count:50
 
Optical PropertiesMetricEnglishComments
Haze 0.500 - 40.0 %0.500 - 40.0 %Average value: 9.04 % Grade Count:64
Gloss 3.00 - 150 %3.00 - 150 %Average value: 102 % Grade Count:33
Transmission, Visible 80.0 - 90.0 %80.0 - 90.0 %Average value: 88.9 % Grade Count:27
 
Processing PropertiesMetricEnglishComments
Processing Temperature 87.8 - 280 °C190 - 536 °FAverage value: 213 °C Grade Count:39
Feed Temperature 40.0 - 80.0 °C104 - 176 °FAverage value: 60.0 °C Grade Count:3
Nozzle Temperature 204 - 250 °C400 - 482 °FAverage value: 214 °C Grade Count:56
Die Temperature 175 - 230 °C347 - 446 °FAverage value: 210 °C Grade Count:23
Melt Temperature 16.0 - 302 °C60.8 - 575 °FAverage value: 216 °C Grade Count:196
Head Temperature 200 - 230 °C392 - 446 °FAverage value: 215 °C Grade Count:17
Mold Temperature 4.44 - 90.6 °C40.0 - 195 °FAverage value: 43.2 °C Grade Count:169
Drying Temperature 65.6 - 95.0 °C150 - 203 °FAverage value: 75.7 °C Grade Count:85
Dry Time 1.00 - 4.00 hour1.00 - 4.00 hourAverage value: 2.61 hour Grade Count:75
Moisture Content 0.0500 - 0.200 %0.0500 - 0.200 %Average value: 0.0547 % Grade Count:32
Injection Pressure 0.500 - 120 MPa72.5 - 17400 psiAverage value: 48.4 MPa Grade Count:87
Hold Pressure 2.07 - 80.0 MPa300 - 11600 psiAverage value: 20.6 MPa Grade Count:61
Back Pressure 0.000 - 2.00 MPa0.000 - 290 psiAverage value: 1.02 MPa Grade Count:87
Clamp Pressure 27.6 - 34.5 MPa4000 - 5000 psiAverage value: 31.0 MPa Grade Count:14
 
Component Elements PropertiesMetricEnglishComments
SiO2 0.180 %0.180 %Average value: 0.180 % Grade Count:5

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-30755.html

免责声明: 本文 Overview of materials for Polypropylene Copolymer 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4