- 密度 [g/cm3]: 1.39
- 吸水率 [%]: 0.035
- 缺口冲击强度: 0.427
- 断裂伸长率 [%]: 155
- 弯曲强度 [MPa]: 102.0
- 弯曲模量 [MPa]: 11.7
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.39 - 1.61 g/cc | 0.0502 - 0.0582 lb/in³ | Average value: 1.50 g/cc Grade Count:17 |
| Filler Content | 10.0 - 40.0 % | 10.0 - 40.0 % | Average value: 27.7 % Grade Count:13 |
| Water Absorption | 0.0350 - 0.100 % | 0.0350 - 0.100 % | Average value: 0.0783 % Grade Count:3 |
| Linear Mold Shrinkage | 0.000100 - 0.00200 cm/cm | 0.000100 - 0.00200 in/in | Average value: 0.000593 cm/cm Grade Count:15 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 102 - 200 MPa | 14800 - 29000 psi | Average value: 148 MPa Grade Count:17 |
| Elongation at Break | 0.250 - 4.00 % | 0.250 - 4.00 % | Average value: 1.36 % Grade Count:15 |
| Modulus of Elasticity | 13.8 - 36.2 GPa | 2000 - 5250 ksi | Average value: 27.5 GPa Grade Count:15 |
| Flexural Yield Strength | 155 - 290 MPa | 22500 - 42000 psi | Average value: 214 MPa Grade Count:15 |
| Flexural Modulus | 11.7 - 31.0 GPa | 1700 - 4500 ksi | Average value: 22.6 GPa Grade Count:17 |
| Izod Impact, Notched | 0.427 - 3.20 J/cm | 0.800 - 6.00 ft-lb/in | Average value: 0.931 J/cm Grade Count:15 |
| Izod Impact, Unnotched | 2.14 - 8.54 J/cm | 4.00 - 16.0 ft-lb/in | Average value: 4.14 J/cm Grade Count:14 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00 - 1.00e+8 ohm-cm | 1.00 - 1.00e+8 ohm-cm | Average value: 1.25e+7 ohm-cm Grade Count:8 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 216 - 318 °C | 420 - 605 °F | Average value: 266 °C Grade Count:16 |
| Flammability, UL94 | V-0 | V-0 | Grade Count:9 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 271 - 399 °C | 520 - 750 °F | Average value: 337 °C Grade Count:13 |
| Mold Temperature | 37.8 - 121 °C | 100 - 250 °F | Average value: 83.1 °C Grade Count:15 |
| Drying Temperature | 149 - 163 °C | 300 - 325 °F | Average value: 149 °C Grade Count:13 |
| Dry Time | 4.00 - 8.00 hour | 4.00 - 8.00 hour | Average value: 6.55 hour Grade Count:11 |
| Dew Point | -28.9 °C | -20.0 °F | Average value: -28.9 °C Grade Count:8 |
| Injection Pressure | 34.5 - 124 MPa | 5000 - 18000 psi | Average value: 88.2 MPa Grade Count:14 |