- 密度 [g/cm3]: 1.59
- 吸水率 [%]: 0.56
- 缺口冲击强度: 0.271
- 弯曲强度 [MPa]: 58.0
- 弯曲模量 [MPa]: 9.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.630 g/cc | 0.0228 lb/in³ | ASTM D1895 |
| Density | 1.59 g/cc | 0.0574 lb/in³ | ASTM D792 |
| Water Absorption | 0.56 % | 0.56 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0034 cm/cm | 0.0034 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 67 | 67 | ASTM D785 |
| Tensile Strength, Ultimate | 58.0 MPa | 8410 psi | ASTM D638 |
| Elongation at Break | 1.11 % | 1.11 % | ASTM D638 |
| Tensile Modulus | 9.50 GPa | 1380 ksi | ASTM D638 |
| Flexural Strength | 83.0 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 9.20 GPa | 1330 ksi | ASTM D790 |
| Compressive Strength | 163 MPa | 23600 psi | ASTM D695 |
| Izod Impact, Notched | 0.271 J/cm | 0.508 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.251 J/cm² | 1.19 ft-lb/in² | ASTM D256 |
| Impact | 147 | 147 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 4.90e+11 ohm-cm | 4.90e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 7.9 | 7.9 | ASTM D150 |
| Dielectric Strength | 6.90 kV/mm | 175 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.12 | 0.12 | ASTM D150 |
| Arc Resistance | 184 sec | 184 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 210 °C | 410 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Oxygen Index | 35 % | 35 % | ASTM D2863 |
| Shrinkage | 0.40 % | 0.40 % | 72 hr, 120ºC; ASTM D1299 |