- 密度 [g/cm3]: 1.56
- 吸水率 [%]: 0.47
- 缺口冲击强度: 0.21
- 断裂伸长率 [%]: 79.5
- 弯曲强度 [MPa]: 51.1
- 弯曲模量 [MPa]: 8.01
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.56 g/cc | 0.0564 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.610 g/cc | 0.0220 lb/in³ | Apparent density per ASTM D1895 |
| Water Absorption | 0.47 % | 0.47 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0042 cm/cm | 0.0042 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 62 | 62 | ASTM D785 |
| Tensile Strength, Ultimate | 51.1 MPa | 7410 psi | ASTM D638 |
| Elongation at Break | 0.80 % | 0.80 % | ASTM D638 |
| Tensile Modulus | 8.70 GPa | 1260 ksi | ASTM D638 |
| Flexural Yield Strength | 79.5 MPa | 11500 psi | ASTM D790 |
| Flexural Modulus | 8.01 GPa | 1160 ksi | ASTM D790 |
| Compressive Yield Strength | 162.4 MPa | 23550 psi | ASTM D695 |
| Izod Impact, Notched | 0.210 J/cm | 0.393 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.210 J/cm² | 0.999 ft-lb/in² | ASTM D256 |
| Impact | 170 | 170 | J/m Plenco drop ball test |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 2.015e+11 ohm-cm | 2.015e+11 ohm-cm | ASTM D257 |
| Dielectric Constant | 7.8 @Frequency 1e+6 Hz | 7.8 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 8.00 kV/mm | 203 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.099 @Frequency 1e+6 Hz | 0.099 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 190 sec | 190 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 188 °C | 370 °F | Heat resistance per ASTM D794 |
| Deflection Temperature at 1.8 MPa (264 psi) | 199 °C | 390 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 3.10 mm | V-0 @Thickness 0.122 in | |