- 密度 [g/cm3]: 1.82
- 吸水率 [%]: 0.06
- 缺口冲击强度: 0.292
- 弯曲强度 [MPa]: 72.0
- 弯曲模量 [MPa]: 15.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.870 g/cc | 0.0314 lb/in³ | ASTM D1895 |
| Density | 1.82 g/cc | 0.0658 lb/in³ | ASTM D792 |
| Water Absorption | 0.060 % | 0.060 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0021 cm/cm | 0.0021 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 95 | 95 | ASTM D785 |
| Tensile Strength, Ultimate | 72.0 MPa | 10400 psi | ASTM D638 |
| Elongation at Break | 0.67 % | 0.67 % | ASTM D638 |
| Tensile Modulus | 16.8 GPa | 2440 ksi | ASTM D638 |
| Flexural Strength | 127 MPa | 18400 psi | ASTM D790 |
| Flexural Modulus | 15.0 GPa | 2180 ksi | ASTM D790 |
| Compressive Strength | 204 MPa | 29600 psi | ASTM D695 |
| Izod Impact, Notched | 0.292 J/cm | 0.547 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.281 J/cm² | 1.34 ft-lb/in² | ASTM D256 |
| Impact | 183 | 183 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.20e+11 ohm-cm | 2.20e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.2 | 6.2 | ASTM D150 |
| Dielectric Strength | 8.90 kV/mm | 226 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.027 | 0.027 | ASTM D150 |
| Arc Resistance | 89 sec | 89 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 220 °C | 428 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Shrinkage | 0.090 % | 0.090 % | 72 hr, 120ºC; ASTM D1299 |