Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution

Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution 物性表: Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution物性表及特性介绍,Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution注塑参数详情,如需Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 125.0
  • 密度 [g/cm3]: 0.93
  • 缺口冲击强度: 30.0
  • 拉伸强度 [MPa]: 10.6
  • 弯曲强度 [MPa]: 8.3
  • 弯曲模量 [MPa]: 0.438
 
Physical PropertiesMetricEnglishComments
Density 0.930 g/cc0.0336 lb/in³
Viscosity  27000 cP
@Shear Rate 5000 1/s,
Temperature 190 °C
27000 cP
@Shear Rate 5000 1/s,
Temperature 374 °F
Apparent Dynamic Viscosity
 44000 cP
@Shear Rate 1000 1/s,
Temperature 190 °C
44000 cP
@Shear Rate 1000 1/s,
Temperature 374 °F
Apparent Dynamic Viscosity
 53000 cP
@Shear Rate 300 1/s,
Temperature 190 °C
53000 cP
@Shear Rate 300 1/s,
Temperature 374 °F
Apparent Dynamic Viscosity
Melt Flow 125 g/10 min
@Load 2.16 kg
125 g/10 min
@Load 4.76 lb
Melt flow ratio I10/I2 is 6.5.
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 8.30 MPa1200 psi
Tensile Strength, Yield 10.6 MPa1540 psi
Elongation at Break 400 %400 %
Modulus of Elasticity 0.269 GPa39.0 ksiMolded Sample 2% Secant Modulus
Flexural Modulus 0.438 GPa63.5 ksi
Izod Impact, Notched (ISO) 30.0 kJ/m²
@Temperature -50.0 °C
14.3 ft-lb/in²
@Temperature -58.0 °F
 
Thermal PropertiesMetricEnglishComments
Vicat Softening Point 96.1 °C205 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40175.html

免责声明: 本文 Dow DOWLEX™ 2503.10 Linear Low Density Polyethylene, Narrow MW Distribution 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4